Trilliant™ HC high performance formulations were developed for specific healthcare enclosure needs, including: • Chemical resistance to common disinfectants • UL 94 ratings of 5VA at 3.0, V-0 at 1.5 mm & V-1 at 0.75 mm • Retained color aesthetics after chemical exposure • Ability to utilize existing PC/PET & COPE tooling Tested using an adaptation from ASTM D543 for environmental stress cracking resistance (ESCR), 15 bars of each material were placed into jigs at 1% and 2% strain. This procedure was completed by placing one 1/2 inch section of rayon gauze at the apex of each bar, and soaking the gauze with the disinfectant to saturate the material.

If exposed to cold temperatures, it is recommended that the container of plastisol be stored at room temperature for 1–2 days before the plastisol is used. The frequency of the need for re-mixing will typically vary between 1 week and 1 month.

KEY CHARACTERISTICS • Faster processing speeds (up to 1,000 m/min) at low wall thickness (100 µm) • Increased chemical resistance • Lower gel migration • ECCOH 6153 UV - optimized for Teroson • ECCOH 6154 UV - optimized for Unigel • High color rendition and compatibility with Avient masterbatch • High UV resistance • Very low shrinkage MARKET & APPLICATIONS Optical Fiber Cables including: • Stranded loose tubes – gel-filled/dry • Micro-modules • Tight buffer applications – gel-filled/dry STANDARD COMPLIANCE • IEC 60794 • NF XP C93-850-1-1:2020 • EN 50289-4-17:2016 • ISO 4892:2016 • ST/CNET/5843 (1998) PRODUCT BULLETIN GEL MIGRATION PERFORMANCE ECCOH LSFOH 6153/6154 UV grades offer greater gel migration performance compared to alternative ECCOH grades. Gel migration is measured using a quantitative internal method * 6151 can be supplied with UV protection * Values concluded from the simulation of materials rheological data and modelling standard extrusion tooling Pressure: can affect extruder performance, higher pressure gives a lower output at the same rpm Shear rate: has a relation with self-cleaning of the walls and mixing conditions Stress: can affect the surface of the product, less stress gives a better surface aspect MIGRATION OF GEL COMPOUND Gel Compound ECCOH™ 6151* ECCOH™ 6153 UV ECCOH™ 6154 UV Unigel Average Good Excellent Teroson Average Excellent Good Itcogel Average Good Excellent ECCOH™ 6151 ECCOH™ 6153 UV ECCOH™ 6154 UV ∆P (bars) 101 63 60 Shear Rate (1/s) 9 9 9 Stress (kPa) 127 79 75 Application example: Gel-filled stranded loose tube optical fiber cable www.avient.com Copyright © 2020, Avient Corporation.

Bob Patterson Chairman, President, and CEO August 1, 2020 ENVIRONMENTAL POLICY Avient Corporation conducts its operations in an environmentally responsible manner that is protective of the communities in which we operate. Bob Patterson Chairman, President, and CEO August 1, 2020 SAFETY & HEALTH POLICY Avient Corporation believes safety and health are the highest corporate priority. Bob Patterson Chairman, President, and CEO August 1, 2020 Product Stewardship Policy Product Stewardship plays a significant role in Avient’s sustainable and ethical business practices.

Microsoft PowerPoint - PolyOne Investor Presentation 5.4.20_v8 P E O P LE P RO D U CT S P LA N E T P E RF O R MAN C E JVs Performance Products & Solutions Distribution Specialty To be the world’s premier provider of specialized polymer materials, services and solutions To be the world’s premier provider of specialized polymer materials, services and sustainable solutions 2016 2017 2018 2019 Lightweighting Reduced Material Requirements Improved Recyclability Renewable Energy Applications Eco-conscious Bio-derived Content Reduced Energy Use VOC Reduction $275M $325M $355M $410M 14% Total Annual Growth 9% Organic Annual Growth PolyOne Corporation 33 Adjusted EPS attributable to PolyOne common shareholders is calculated as follows: 2009* 2010* 2011* 2012* 2013* 2014* 2015* 2016** 2017** 2018 2018*** Q1 2019*** 2019 Q1 2020 Net income from continuing operations attributable to PolyOne common shareholders Joint venture equity earnings, after tax Special items, before tax(1) Special items, tax adjustments(1) Adjusted net income from continuing operations attributable to PolyOne common shareholders $ 106.7 $ 152.5 $ 153.4 $ 53.3 $ 94.0 $ 78.0 $ 144.6 $ 166.4 $ 173.5 $ 161.1 $ 87.7 $ 22.4 $ 75.5 $ 33.1 (19.0) (14.7) (3.7) — — — — — — — — — — — (48.7) 24.2 (48.1) 55.1 46.3 164.2 87.6 23.8 32.9 59.5 58.7 12.2 61.7 9.6 (27.2) (96.7) (24.7) (18.9) (13.7) (73.7) (58.7) (15.9) (24.8) (25.3) (25.1) (1.2) (5.9) (1.0) $ 11.8 $ 65.3 $ 76.9 $ 89.5 $ 126.6 $ 168.5 $ 173.5 $ 174.3 $ 181.6 $ 195.3 $ 121.3 $ 33.4 $ 131.3 $ 41.7 Diluted shares 93.4 96.0 94.3 89.8 96.5 93.5 88.7 84.6 82.1 80.4 80.4 78.2 77.7 86.7 Adjusted EPS attributable to PolyOne common shareholders $ 0.13 $ 0.68 $ 0.82 $ 1.00 $ 1.31 $ 1.80 $ 1.96 $ 2.06 $ 2.21 $ 2.43 $ 1.51 $ 0.43 $ 1.69 $ 0.48 * Historical results are shown as presented in prior filings and have not been updated to reflect subsequent changes in accounting principle, discontinued operations or the related resegmentation. ** Pro forma for sale of Designed Structures and Solutions segment (DSS). *** Pro forma for sale of Performance Products and Solutions segment (PP&S). Reconciliation to Adjusted EPS Excluding Special Items and Impacts of February 2020 Equity Offering Three MonthsEnded March 31, 2020 Net income from continuing operations – GAAP $ 33.1 Special items, after tax(1) 8.6 After tax interest income earned on equity proceeds, included in Interest expense, net (0.7) Adjusted net income excluding special items and impact of interest income on equity proceeds $ 41.0 Diluted weighted-average shares used to compute earnings per common share 86.7 Weighted-average impact of 15.3 million shares issued in February 2020 equity offering (9.3) Diluted weighted-average shares excluding impact of shares issued in February 2020 equity offering 77.4 Adjusted EPS - excluding special items and the net impact of equity offering $ 0.53 Reconciliation of Non-GAAP Financial Measures (Unaudited) (Dollars in millions, except per share data) Senior management uses comparisons of adjusted net income from continuing operations attributable to PolyOne shareholders and diluted adjusted earnings per share (EPS) from continuing operations attributable to PolyOne shareholders, excluding special items, to assess performance and facilitate comparability of results.

Seite 1 von 4 1 a) PolyOne Th. Bergmann GmbH Die Gesellschafterversammlung vom 21.10.2021 hat die Änderung des Gesellschaftsvertrages in § 1 (Firma und Sitz) beschlossen. 08.11.2021 Rühl

Reference Product Name Carrier CC10087477BG 87477 EVA Anti-Rat Masterbatch EVA CC10107079BG 107079 EVA Anti-Termite Masterbatch EVA CC10125842BG 5842 EVA Multi-Repel Masterbatch EVA VALUE SOLUTION The European Union adopted Guidelines in 2015 establishing that masterbatches with biocidal function needed to be authorized for use in European Union.1 As such, masterbatch products containing aversive or repellent substances are considered as a biocidal product.2 Indeed, deterring harmful organisms is a biocidal function. TECHNOLOGY BENEFITS • Helps provide long term cable protection against rats and termites • Enables manufacturers and cable users to be compliant with EU Regulations • Easy to use, direct incorporation in the jacket, no need for additional layer to protect the cable • Helps avoid unplanned service breakdowns with associated high repair costs 1 CA-Sept15-Doc.6.2- Final 2 A masterbatch should be regarded as a biocidal product if it is has a biocidal function. In accordance with Article 3(1)(a) of Regulation (EU) No 528/2012, destroying, deterring, rendering harmless, preventing the action of, or otherwise exerting a controlling effect on any harmful organism is a biocidal function.

添加率计算器 预计的乙醛消减率(%) 预计的Triple A使用率(%) 64 0.111 % 消减率计算器 开始的乙醛含量(ppm) 想要的乙醛含量(ppm) 想要的乙醛消减率(%) 0. 050 0.1 0.15 0.2 90 .04 .06 .080 20. 0.1 0.16 0.1821.0 41.0 0.2 % A A R ed uc ti o n % Triple A-1+ 邻氨基苯甲酰胺 乙 醛 消 减 率 嘉洛斯材料与标准竞争性材料在消减乙醛率和用量%方面的功效 对比 使用率 90 .04 .06 .08.020 0.1 0.16 0.180.140.12 0.2 乙 醛 消 减 率 % Triple A-1+ 5.8 4.5 22 (1) TRIPLE A™ 应用于医疗行业的嘉洛斯

Microsoft Word - PolyOne India Terms and Conditions of Sale of Products.052716.doc TERMS AND CONDITIONS These Terms and Conditions apply to the sale of Products by PolyOne Corporation and its subsidiaries. 1. Except to the extent attributable to the Product failing to meet the express warranties set forth in paragraph 1, Buyer will indemnify, defend and hold Seller harmless from all costs, expenses, damages, judgements or other loss, including costs of investigation, litigation and reasonable attorney’s fees, arising out of Buyer’s selection, use, sale and further processing of the Product. 9. Either party may suspend performance hereunder (except to pay for Product already received) in the event of: (1) acts of God, fire, explosion, flood, hurricanes; (2) strikes, lockouts or other industrial disturbances or riots; (3) war, declared or undeclared, or acts of terrorism; (4) compliance with any Federal, state, provincial, municipal or military law, regulation, order, or rule, foreign or domestic, including priority, rationing, allocation or preemption orders or regulations, or cancellation of Seller’s or Buyer’s license to operate its plant; (5) catastrophic failure of facilities used to manufacture Product, interruption or shortage of transportation, labor, power, fuel or raw materials; (6) total or partial shutdown due to Seller’s normal plant turnaround; or (7) any other cause or causes of any kind or character reasonably outside the control of the party failing to perform, whether similar or dissimilar from the enumerated causes (a “force majeure”).

The company was formerly known as: S/N Company Name Effective From 1.