The issuance of orders by Buyer implies full acceptance of these Terms and Conditions which shall prevail over Buyer's terms and conditions in the event they contradict or deviate from these Terms and Conditions. 2. L'émission de bons de commande par l'Acheteur implique l'acceptation pleine et entière des Conditions Générales de Vente qui prévaudront sur les conditions générales de l'Acheteur en cas de contradiction ou de divergence avec les présentes Conditions Générales de Vente. 2. Seller may deliver to Buyer a quantity of Products with a quantity tolerance which may vary, depending upon the quantities ordered by Buyer, as follows: (1) from 50 to 99 kgs, +/- 25%; (2) from 100 to 249 kgs, +/- 15%; (3) from 250 to 499 kgs, +/- 10%; (4) more than 500 kgs, +/- 5%.

Examples of typical DMA results are shown in Figure 2. The mechanical properties change was found less than 5 percent and dimensional change is less than 2 percent. TEM of high molecular weight SEBS/Oil/PP compound ANTEC 2003 / 3037 Figure 2.

WITH ADDITIONAL FACILITIES LISTED ON ATTACHED ANNEX) Certificate Of Conformance has been assessed by ABS Quality Evaluations, Inc. and found to be in conformance with the requirements set forth by: Page 2 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. Facility: Avient Corporation - Assesse, Belgium (CAI & SEM) 2 Rue Melville Wilson Assesse 5330 Belgium Activity: Liquid Colorants and Additives for Plastics Activity: "Design of color concentrates, precolors, and compounds for fluoropolymer and high temperature polymers, LSFOH (low smoke and fume, zero halogen compounds), and Specialty Compounds Manufacture of Color and Additive Concentrates and Specialty Compounds" Page 6 of 7 ABS Quality Evaluations Avient Corporation ISO 9001:2015 Certificate Of Conformance ANNEX At Below Facilities: Validity of this certificate may be confirmed at www.abs-qe.com/cert_validation. All rights reserved. 31307Certificate No: Facility: Avient Corporation - Knowsley, United Kingdom Unity Grove Knowsley, Merseyside L349GT United Kingdom Facility: Avient Corporation - Alicante (Ibi - IQAP), Spain Guadalajara 6, Poligono Industrial L'Alfalç Ibi, Alicante 03440 Spain Activity: Design and Manufacture of Liquid Colorants and Additives for Plastics, Assembly and Supply of Material Dosing Equipment Activity: Design, development and production of color concentrates and additives for plastic and synthetic fibers Facility: Avient Corporation - Vic (Barcelona), Spain Carretera de Vic a Olot,C-153, km 5 Masies de Roda, Barcelona 08500 Spain Activity: Design, development and production of color concentrates and additives for plastic and synthetic fibers Facility: Avient Corporation - Melle, Germany Oldendorfer Straße 9 Thuringia 49342 Germany Facility: Avient Corporation - Gaggenau, Germany Adolf-Dambach-Str. 2 Gaggenau, Thuringia 76571 Germany Activity: Development and Manufacture of LSFOH (low smoke and fume, zero halogen) compounds Activity: Design and Manufacture of Specialty Engineered Thermoplastics

Purchasing, Customer Service, Logistics, Quality, Design and Sampling; Corporate HQ, Management of QMS 33587, Walker Road, Building 428 Avon Lake - OH 44012 United States Avient Corporation - Avon Lake, OH (SEM) Manufacture of Engineered Thermoplastics , 554 Moore Road Avon Lake - OH 44012 United States Avient Corporation - Aland (Odkarby), Finland Manufacture of colorants and compounds for fluoropolymer and high temperature polymers Kroklundsvagen 346 AX-22320 Ödkarby Finland Avient Corporation - Alicante (Ibi - IQAP), Spain Design, development and production of color concentrates and additives for plastic and synthetic fibers Guadalajara 6, Poligono Industrial L'Alfalç 03440 Ibi Spain Avient Corporation - Assesse, Belgium (CAI & SEM) "Design of color concentrates, precolors, and compounds for fluoropolymer and high temperature polymers, LSFOH (low smoke and fume, zero halogen compounds), and Specialty Compounds Manufacture of Color and Additive Concentrates and Specialty Compounds" 2 Rue Melville Wilson 5330 Assesse Belgium Avient Corporation - Barbastro Design and Manufacture of Specialty Engineered Thermoplastics Pol. Page 2 of 4 https://abs.ez2xs.com https://abs.ez2xs.com A B S Q u al it y E va lu at io n s C er ti fic at io n E Avient Corporation - Cergy, France Design and Manufacture of Color and Additive Concentrates and Specialty Compounds , 14 Avenue de l'Eguillette Saint Ouen l'Aumône - 95310 France Avient Corporation - Esenyurt, Turkey Design and Manufacture of Specialty Engineered Thermoplastics Orhangazi Mah. 1683 Sok. No:8 34538 Esenyurt Turkey Avient Corporation - Gaggenau, Germany Design and Manufacture of Specialty Engineered Thermoplastics Adolf-Dambach-Str. 2 76571 Gaggenau Germany Avient Corporation - Glendale, AZ Manufacture of Colorants for Plastics 7601, North Glen Harbor Blvd.

2 Bribery of Government Officials 2 Commercial Bribery 2 Facilitation Payments and Kickbacks 3 Working with Agents, Distributors and Other Third Parties 3 Due Diligence and Approval Process 3 Red Flags 3 Accounting and Record Keeping Requirements 4 Reporting Possible Violations 4 Avient Ethics Hotline 4 Protection from Retaliation 4 Quick Reference: ABAC DOs and DON’Ts 5 1 Our Global Policy on Anti-Bribery and Anti-Corruption Avient strictly prohibits fraud, bribery, and other corrupt business practices in all of our business operations anywhere in the world. To comply with ABAC Laws, no associate or third parties acting on behalf of Avient should ever offer to anyone, or receive from anyone, directly or indirectly, any form of gift, entertainment or anything of value where that bribe is meant to: • Obtain or retain business • Influence business decisions • Secure an unfair advantage 2 This includes any government official and/or private sector employee HOME | TOC 2 ABAC Laws are wide-reaching and can be interpreted very broadly.

2 Praktik Suap terhadap Pejabat Pemerintah 2 Praktik Suap Komersial 3 Pembayaran Uang Pelicin dan Balas Jasa 3 Bekerja Sama dengan Agen, Distributor, dan Pihak Ketiga Lainnya 3 Uji Tuntas dan Proses Persetujuan 3 Tanda Bahaya 4 Persyaratan Akuntansi dan Pencatatan 4 Melaporkan Kemungkinan Pelanggaran 4 Saluran Langsung Etika Avient 5 Perlindungan dari Pembalasan Dendam 5 Referensi Cepat: ANJURAN DAN LARANGAN ABAC 6 1 Kebijakan Global Kita tentang Antisuap dan Antikorupsi Avient melarang keras penipuan, praktik suap, dan praktik bisnis korup lainnya di semua operasi bisnis kita di mana pun di seluruh dunia. Tanggung Jawab Kita Semua pejabat dan karyawan Avient, serta pihak ketiga yang bertindak atas nama Avient bertanggung jawab untuk memahami dan mematuhi Kebijakan ini serta masing- masing dari mereka berkewajiban untuk: • Memahami aspek Kebijakan yang berlaku dan menyampaikannya kepada bawahan mereka • Mengajukan pertanyaan jika Kebijakan atau tindakan yang perlu diambil dalam situasi tertentu dianggap tidak jelas • Mengelola dan memantau kegiatan bisnis yang dilakukan melalui pihak ketiga dengan benar • Mewaspadai indikasi atau bukti kemungkinan pelanggaran • Segera melaporkan pelanggaran atau dugaan pelanggaran melalui saluran yang sesuai Undang-Undang ABAC melarang perusahaan atau pihak mana pun menawarkan, menjanjikan, membayar, atau mengizinkan pembayaran barang berharga kepada individu mana pun 2 untuk membantu menjaga atau mengamankan bisnis atau memperoleh keuntungan bisnis yang tidak patut lainnya. Untuk mematuhi Undang-Undang ABAC, karyawan atau pihak ketiga yang bertindak atas nama Avient tidak boleh menawarkan kepada siapa pun, atau menerima dari siapa pun, secara langsung atau tidak langsung, segala bentuk 2 Ini termasuk pejabat pemerintah dan/atau karyawan sektor swasta Daftar Isi 2 hadiah, hiburan, atau barang berharga yang ditujukan sebagai suap untuk: • Mendapatkan atau mempertahankan bisnis • Memengaruhi keputusan bisnis • Mendapatkan keuntungan yang tidak adil Undang-Undang ABAC menjangkau dan dapat ditafsirkan secara luas.

2 Kormányhivatalnok megvesztegetése 2 Kereskedelmi vesztegetés 3 Ügymenetkönnyítő kifizetések és visszafizetések 3 Együttműködés megbízottakkal és más harmadik felekkel 3 Átvilágítási és jóváhagyási eljárás 3 Figyelmeztető jelzések 4 Számviteli és nyilvántartás-vezetési követelmények 4 Az irányelv lehetséges megsértéseinek jelentése 4 Avient etikai forródrót 5 Megtorlással szembeni védelem 5 Gyors hivatkozás: HELYES ÉS HELYTELEN ELJÁRÁSOK AZ ABAC SZERINT 6 1 Globális vesztegetésellenes és korrupcióellenes irányelvünk Az Avient minden üzleti műveletével kapcsolatban szigorúan tiltja a csalást, a vesztegetést és az egyéb korrupt üzleti gyakorlatokat a világ minden részén. Az ABAC jogszabályok jogellenessé teszik bármely vállalat vagy személy számára, hogy bármilyen értékkel bíró dolgot felajánljanak, ígérjenek, fizessenek vagy jóváhagyjanak bármely személy számára 2 az üzleti lehetőség megőrzésének vagy biztosításának elősegítése, vagy más, nem megfelelő üzleti előny megszerzése érdekében. Ez a tiltás mindig érvényes, függetlenül attól, hogy a felajánlás vagy kifizetés közvetlenül vagy másik személyen keresztül történik. 2 Ide tartozik minden kormányhivatalnok és/vagy magánszektorbeli alkalmazott Tartalomjegyzék 2 Az ABAC jogszabályoknak való megfelelés érdekében az Avient nevében eljáró munkatársak vagy harmadik felek soha nem kínálhatnak senkinek sem közvetlenül, sem közvetetten semmiféle ajándékot, szórakoztatást vagy bármilyen értékkel bíró dolgot, ha a megvesztegetés célja: • Üzlet megszerzése vagy megtartása • Üzleti döntések befolyásolása • Tisztességtelen előny biztosítása Az ABAC jogszabályok széles terjedelműek és nagyon tágan értelmezhetők.

ขอ้จาํกดัการรบัประกนั ผูข้ายรบัประกนัวา่เป็นผูม้ีกรรมสิทธิ�โดยชอบในสินคา้ และสินคา้ดงักล่าวเป็นไปตามขอ้กาํหนดที(จดัพิมพเ์ผยแพร่ของผูข้าย (หากมี) หรือเกณฑ ์และ/หรือมาตรฐานคุณภาพอื(นๆ ที(คู่สญัญาไดนํ้ามาแนบทา้ยเอกสารฉบบันี7 หรือที(คู่สญัญาไดต้กลงกนัเป็นหนังสือในภายหลงั คาํแนะนําของผูข้ายที(ใหไ้วแ้ก่ผูซื้7 อเพื(อการใชสิ้นคา้เป็นไปตามขอ้มลูที(ผูข้ายพิจ ารณาวา่เชื(อถือได ้อย่างไรก็ดี ผูข้ายไม่รบัรองผลใดๆ ที(ผูซ้ื7 ออาจไดร้บัจากการที(ผูซ้ื7 อใชสิ้นคา้ดงักล่าว การรบัประกนัเหล่านี7 ใชไ้ดเ้ฉ พาะแต่ผูซ้ื7 อเท่านั7น ผูข้ายไม่รบัรอง หรือรบัประกันใดๆ เกี�ยวกบัสินคา้ดงักล่าว ไม่ว่าโดยชัดแจง้ หรือโดยปริยาย ในเรื�องของความเหมาะสมในการซื) อขาย หรือเพื�อวัตถุประสงคเ์ฉพาะใดๆ อีกทั)งผูข้ายไม่รบัประกนัอื�นใดนอกเหนื อไปจากรายละเอียดสินคา้ ไม่ว่าจะเป็นการนาํสินคา้ไปใชโ้ดยลาํพงั หรือใชร้ว่มกับทรพัยส์ินอื�นใด หรือในกระบวนการใดๆ ก็ตาม 2. In no event will either party have liability to the other for any incidental, consequential, exemplary or special damages. 2. Either party may suspend performance hereunder (except to pay for the Product already received) in the event of: (1) acts of God, fire, explosion, flood, earthquake, storms, or other natural disasters; (2) strikes, lockouts or other industrial disturbances or riots; (3) war, declared or undeclared, or acts of terrorism; (4) compliance with any governmental, provincial, municipal or military law, regulation, order, or rule, foreign or domestic, including priority, rationing, allocation or preemption orders or regulations, or cancellation of Seller’s or Buyer’s license to operate its plant; (5) catastrophic failure of facilities used to manufacture the Product, interruption or shortage of transportation, labor, power, fuel or raw materials; (6) total or partial shutdown due to Seller’s plant turnaround resulting from Items (1)-(5) above; or (7) any other cause or causes of any kind or character reasonably outside the control of the party failing to perform, whether similar or dissimilar from the enumerated causes (a “force majeure”).

Microsoft PowerPoint - Avient Discontinued Operations Financial Information AVIENT CORPORATION R E C A S T F I N A N C I A L I N F O R M A T I O N T O R E F L E C T D I S T R I B U T I O N A S A D I S C O N T I N U E D O P E R A T I O N (NYSE: AVNT) S E P T E M B E R 2 7 , 2 0 2 2 TAB LE OF CONTENTS Avient Corporation 2 Slide 3 - GAAP Income Statement Recast for Avient Distribution as a Discontinued Operation Reflects US GAAP (GAAP) Income Statements recast for Avient Distribution as a discontinued operation.

Forward – Looking Statements Page 2 • This presentation includes the use of both GAAP (generally accepted accounting principles) and non-GAAP financial measures. EPS: $2.50 Assumptions • Operating margins in mid-range of 2015 targets • No global recession • No investment in incremental PP&S capacity • Completion of 2-3 midsize accretive acquisitions • Housing starts at 85% of 50 year norm by 2015 • Mid single digit revenue CAGR • Remain comfortably below 3X Net Debt / EBITDA Page 11 2012 Rev: $2.9B Adj. Platform operating income mix percentage 2005Y* 2008Y* 2010Y* 2012Y* 2012PF** H1 2013*** Global Specialty Engineered Materials $ 0.4 $ 17.6 $ 49.7 $ 47.0 $ 47.7 $ 32.5 Global Color, Additives and Inks 4.3 28.1 37.7 66.8 81.6 54.7 Designed Structures & Solutions - - - - 20.9 10.5 Specialty Platform $ 4.7 $ 45.7 $ 87.4 $ 113.8 $ 150.2 $ 97.7 Performance Products and Solutions 75.7 31.3 54.0 74.9 37.4 27.5 Distribution 19.5 28.1 42.0 66.0 66.0 33.1 SunBelt Joint Venture 91.9 28.6 18.9 - - - Corporate (51.5) (425.1) (27.7) (87.6) (87.9) (37.1) Operating income (loss) GAAP $ 140.3 $ (291.4) $ 174.6 $ 167.1 $ 165.7 $ 121.2 Less: Corporate operating expense (income) 51.5 425.1 27.7 87.6 87.9 37.1 Operating income excluding Corporate $ 191.8 $ 133.7 $ 202.3 $ 254.7 $ 253.6 $ 158.3 Specialty platform operating mix percentage 2% 34% 43% 45% 60% 62% * Historical results include the Resin and Specialty Coatings businesses within the Performance Products and Solutions segment. ** Pro Forma results include Spartech and Glasforms acquisitions, Specialty Coatings reclass and exclude the Resin business assets. *** Restated results to exclude the Resin business and to remove Specialty Coatings from the Performance Products and Solutions segment into Global Color, Additives and Inks segment.