Zone 2 - Center 430° F 470° F 221° C 243° C Zone 3 - Front 440° F 480° F 227° C 249° C Nozzle 450° F 480° F 232° C 249° C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 450° F 480° F 232° C 249° C After processing, always purge residual PKE materials with fractional melt flow HDPE or PP.Mold Temperature 150° F 200° F 66° C 93° C DRYING CONDITIONS ENGLISH (°F) METRIC (°C) COMMENTS Temperature 180° F 82° C Drying not required. Duration 2–3 Hours Moisture Level Allowable N/A Notes These preliminary guidelines are based on lab results.

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

Dispute Reason Avient's reason for disputing the invoice 2 Column Description Actions Click on the Edit ( ) or Delete ( ) icon to edit or delete an invoice. Go to the Orders page or, on the Invoices page, click the Create Invoice from PO button above the table to go to the Orders page 2. Click on the Create Credit Note button above the Invoices table on the Invoices page or, on the Orders page, click on the Create Credit Note ( ) icon in the Actions column of the Purchase Orders table. 2.

Notificación desde Registro HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA NOTIFICACIÓN DE INSCRIPCIÓN TOTAL Se pone en su conocimiento que el documento del día veinticinco de enero de dos mil veintidós, que fue presentado el día veintisiete de enero de dos mil veintidós, con el número de entrada 1/2022/233,0, diario 46, asiento 131, ha sido inscrito con fecha diecisiete de febrero de dos mil veintidós, en el tomo 661, folio 67, inscripción 5 con hoja HU-13568, de la entidad AVIENT SÀ RL SUCURSAL EN ESPAÑA. HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA A los efectos del Reglamento General de Protección de Datos 2016/679 del Parlamento Europeo y del Consejo, de 27 de abril de 2016, relativo a la protección de las personas físicas en lo que respecta al tratamiento de datos personales y a la libre circulación de estos datos (en adelante, "RGPD"), queda informado: - De conformidad con la instancia de presentación, los datos personales expresados en la misma y en los documentos presentados han sido y serán objeto de tratamiento e incorporados a los Libros y archivos del Registro, cuyo responsable es el Registrador, siendo el uso y fin del tratamiento los recogidos y previstos expresamente en la normativa registral, la cual sirve de base legitimadora de este tratamiento. HUESCA 2 MERC PLAZA CONCEPCION ARENAL,3 2º A 22002 - HUESCA Este documento ha sido firmado con firma electrónica reconocida por Dña.

A range of standard and customized solutions conforming to UL 94 V-2, V-0 and 5VA performance ratings are available. KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max. Good chemical resistance. 1 IM: Injection Molding, EX: Extrusion, BM: Blow Molding 2 HS: Heat Stabilized, UV: UV Stablized, LM: Lasermarking.

APPLICATION BULLETIN IMPROVED CHEMICAL RESISTANCE Engineered polyketone delivers excellent performance against aggressive chemicals, like H2SO4 for batteries (Figure 1), and performs similarly to nylon against typical chemicals tested in powersports, such as gasoline* (Figure 2). Gasoline - 30% glass-filled (GF) grade, dry as molded (DAM), room temperature Testing methodology is an adaptation from ASTM D543 • Reapply freshly soaked gauze pad every 24 hours to prevent from drying out • Repeat for a total of 72 hours • Tensile properties recorded *Chemical resistance data for DEET, motor oil, glass cleaner, and sunscreen available upon request KEY CHARACTERISTICS Figure 1 Figure 2 3.34 3.84 3.63 1.96 2.21 0.99 3.43 3.86 3.93 1.76 3.49 2.01 3.26 3.66 3.74 1.45 1.06 0.989 2.98 3.99 3.41 1.41 1.07 0.88 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 30% LGF PKE 30% LGF PA6 30% LGF PA66 30% SGF PKE 30% SGF PA6 30% SGF PA66 Ft -lb /in Notched Izod Impact ASTM D256 23C DAM 23C Conditioned -40C DAM -40C Conditioned 1.47 1.37 1.37 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 Glass-Filled PKE Glass-Filled PA6 Glass-Filled PA66 g/ cm 3 Density of Polyketone vs Nylon ASTM D792 LESS MOISTURE ABSORPTION THAN NYLON 30% Short Glass Fiber (SGF) Comparison Moisture uptake, environmental chamber 62% RH, 70°C SIMILAR DENSITY TO NYLON ASTM D792 COMPARABLE AND CONSISTENT IMPACT PERFORMANCE* Notched Izod Impact (ASTM D256) of LGF and SGF for DAM and Conditioned Materials *3,000 hr weathering data available upon request KEY CHARACTERISTICS 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

ITEM 2. Avon Lake, Ohio 2. Audit 2.

Refer to Attachment 7 Reconciliation of Non-GAAP Financial Measures for details regarding adjustments to previously reported results to arrive to the pro forma financial metrics. 2 Webcast Details The company will host a webcast at 9:00 a.m. Three Months Ended December 31, 2020 2019 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 74.2 $ 0.81 $ 6.4 $ 0.08 Special items, after tax (Attachment 3) (26.7) (0.29) 19.9 0.26 Adjusted net income / EPS - excluding special items $ 47.5 $ 0.52 $ 26.3 $ 0.34 (1) Per share amounts may not recalculate from figures presented herein due to rounding Year Ended December 31, 2020 2019 Reconciliation to Condensed Consolidated Statements of Income $ EPS(1) $ EPS(1) Net income from continuing operations attributable to Avient shareholders $ 132.0 $ 1.46 $ 75.5 $ 0.97 Special items, after tax (Attachment 3) 24.8 0.27 55.8 0.72 Adjusted net income / EPS - excluding special items $ 156.8 1.73 $ 131.3 1.69 (1) Per share amounts may not recalculate from figures presented herein due to rounding 6 Attachment 2 Avient Corporation Condensed Consolidated Statements of Income (Unaudited) (In millions, except per share data) Three Months Ended December 31, Year Ended December 31, 2020 2019 2020 2019 Sales $ 997.0 $ 658.6 $ 3,242.1 $ 2,862.7 Cost of sales 744.1 505.3 2,457.8 2,205.5 Gross margin 252.9 153.3 784.3 657.2 Selling and administrative expense 187.9 132.8 595.0 500.4 Operating income 65.0 20.5 189.3 156.8 Interest expense, net (19.3) (11.9) (74.6) (59.5) Other income, net 11.7 10.7 24.3 12.1 Income from continuing operations before income taxes 57.4 19.3 139.0 109.4 Income tax benefit (expense) 17.3 (12.9) (5.2) (33.7) Net income from continuing operations 74.7 6.4 133.8 75.7 Income (loss) from discontinued operations, net of income taxes 0.1 458.9 (0.4) 513.1 Net income 74.8 465.3 133.4 588.8 Net income attributable to noncontrolling interests (0.5) — (1.8) (0.2) Net income attributable to Avient common shareholders $ 74.3 $ 465.3 $ 131.6 $ 588.6 Earnings per share attributable to Avient common shareholders - Basic: Continuing operations $ 0.81 $ 0.08 $ 1.47 $ 0.98 Discontinued operations — 5.97 (0.01) 6.64 Total $ 0.81 $ 6.05 $ 1.46 $ 7.62 Earnings per share attributable to Avient common shareholders - Diluted: Continuing operations $ 0.81 $ 0.08 $ 1.46 $ 0.97 Discontinued operations — 5.92 (0.01) 6.61 Total $ 0.81 $ 6.00 $ 1.45 $ 7.58 Cash dividends declared per share of common stock $ 0.2125 $ 0.2025 $ 0.8200 $ 0.7875 Weighted-average shares used to compute earnings per common share: Basic 91.4 76.9 90.1 77.2 Diluted 92.1 77.5 90.6 77.7 7 Attachment 3 Avient Corporation Summary of Special Items (Unaudited) (In millions, except per share data) Special items (1) Three Months Ended December 31, Year Ended December 31, 2020 2019 2020 2019 Cost of sales: Restructuring costs, including accelerated depreciation $ (1.8) $ — $ (4.3) $ 0.3 Environmental remediation costs (1.1) 0.3 (20.4) (10.1) Reimbursement of previously incurred environmental costs — 0.5 8.7 4.5 Inventory fair market value step-up expense 1.2 — (9.3) (2.0) Impact on cost of sales (1.7) 0.8 (25.3) (7.3) Selling and administrative expense: Restructuring, legal and other (13.0) (4.4) (22.5) (18.6) Acquisition earn-out adjustments 1.5 (15.7) (1.0) (36.4) Acquisition related costs (1.4) (5.3) (24.9) (9.4) Impact on selling and administrative expense (12.9) (25.4) (48.4) (64.4) Impact on operating income (14.6) (24.6) (73.7) (71.7) Costs related to committed financing in interest expense, net — — (10.1) — Other income, net 0.1 0.1 0.4 0.5 Pension settlement/curtailment gains and mark-to-market adjustment 10.3 9.5 17.2 9.5 Impact on income from continuing operations before income taxes (4.2) (15.0) (66.2) (61.7) Income tax benefit (expense) on above special items (1.3) (0.4) 14.1 11.1 Tax adjustments(2) 32.2 (4.5) 27.3 (5.2) Impact of special items on net income from continuing operations attributable to Avient Shareholders $ 26.7 $ (19.9) $ (24.8) $ (55.8) Diluted earnings per common share impact of special items on net income from continuing operations attributable to Avient shareholders $ 0.29 $ (0.26) $ (0.27) $ (0.72) Weighted average shares used to compute adjusted earnings per share: Diluted 92.1 77.5 90.6 77.7 (1) Special items include charges related to specific strategic initiatives or financial restructuring such as: consolidation of operations; debt extinguishment costs; costs incurred directly in relation to acquisitions or divestitures; employee separation costs resulting from personnel reduction programs, plant realignment costs, executive separation agreements; asset impairments; settlement gains or losses and mark-to- market adjustments associated with actuarial gains and losses on pension and other post-retirement benefit plans; environmental remediation costs, fines, penalties and related insurance recoveries related to facilities no longer owned or closed in prior years; gains and losses on the divestiture of operating businesses, joint ventures and equity investments; gains and losses on facility or property sales or disposals; results of litigation, fines or penalties, where such litigation (or action relating to the fines or penalties) arose prior to the commencement of the performance period; one-time, non-recurring items; and the effect of changes in accounting principles or other such laws or provisions affecting reported results Reconciliation of Pro Forma Adjusted Earnings per Share: Three Months Ended December 31, Year Ended December 31, 2019 2020 2019 Net income from continuing operations attributable to Avient shareholders $ 6.4 $ 132.0 $ 75.5 Special items, after tax (Attachment 3) 19.9 24.8 55.8 Adjusted net income from continuing operations excluding special items 26.3 156.8 131.3 Clariant MB pro forma adjustments to net income from continuing operations(2) 1.6 20.7 30.4 Pro forma adjusted net income from continuing operations attributable to Avient shareholders $ 27.9 $ 177.5 $ 161.7 Weighted average diluted shares 77.5 90.6 77.7 Pro forma impact to diluted shares from January 2020 equity offering 15.3 1.5 15.3 Pro forma weighted average diluted shares 92.8 92.1 93.0 Pro forma adjusted EPS - excluding special items pro forma for Clariant MB acquisition $ 0.30 $ 1.93 $ 1.74 (2) Pro forma adjustments for the periods prior to the acquisition date (July 1, 2020) and to give effects to the financing for the acquisition Year Ended December 31, 2020 Sales $ 3,242.1 Clariant MB pro forma adjustment to sales(2) 540.4 Pro forma sales $ 3,782.5 (2) Pro forma adjustments for the periods prior to the acquisition date (July 1, 2020) and to give effects to the financing for the acquisition 13