Additionally, some countries have stringent local fire safety standards for arena and stadium seating, which call for plastics with improved flame retardancy properties, achieved with flame retardant additives.

Offering excellent mechanical properties, the ECCOH 5981 UV formulation provides a durable material choice for Teck 90 cables used in demanding locations where safety is paramount.

VALUE SOLUTION Improve safety and reduce costs with Gravi-Tech formulations When Gravi-Tech polymer metal composites are substituted for lead, manufacturers can avoid the regulatory, disposal and employee exposure challenges associated with lead.

Safety Data Sheets Safety Data Sheets Avient FAQs for the Globally Harmonized System (GHS) Safety Data Sheets (SDS) and Product Labeling; April 2015

Please note all previously entered data will be modified. Please note all previously entered data will be modified. Substances 103­23­1, Bis(2­ethylhexyl) adipate 103­23­1, Bis(2­ethylhexyl) adipate Substances Section Data Statement of Intent Are the following included in the Facility's TRA Plan?

A larger processing window will account for the lot to lot changes between materials, without having to make process changes .3 Setting the Beginning Variables • Injection Pressure = Maximum of machine - Should not be pressure limited • Injection Velocity = Maximum of machine - This is for the injection velocity curve starting point - If flashing is an issue start slower and then increase • Injection Cut-Off Time = 15 seconds - This is only a limiting factor, needs to be above 10 seconds for velocity graph • Hold Pressure = 0 - Need to get 95% full part with a hold pressure of 0 • Hold Time = 10-15 seconds - Need to ensure gate is frozen • Screw Speed = 90% of Maximum - Unless shear sensitive material, if shear sensitive, set RPMs to optimum • Cooling Time = 10–15 seconds • Shot Size = 50% of calculated part volume • Decompression = .25" • Transfer Position = High enough to ensure a cushion - Cushion size does not matter but there must be a cushion to keep a constant pressure on the melt during hold time - Typically 0.25" is sufficient • Back Pressure = 800-1000 plastic pressure - 100–150 hydraulic pressure - Unless specified by material data sheet Determining Shot Size The shot size should be determined by calculating the combined volume of the parts and the runner system . If the material is shear-sensitive, consult the material data sheet or processing guide for instructions to set recovery time • The cooling time should only be 1–2 seconds longer than the screw recovery time, unless dictated by dimensional stability or part thickness Minimize Clamp Pressure This step is done to reduce the amount of energy used by the machine Shot Size = 1 .00 + .10 = 1 .10, Transfer Position = .50 + .10 = .60 Set Safeties This step is to ensure the machine will alarm and alert nearby employees if the machine malfunctions, or if a part gets stuck

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. Technical Data Sheets Safety Data Sheets

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. Technical Data Sheets Safety Data Sheets

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. Technical Data Sheets Safety Data Sheets

Avient has transitioned our Material Safety Data Sheets (MSDSs) to Safety Data Sheets (SDSs) for our manufactured products to meet the requirements of the Globally Harmonized System of Classification and Labeling of Chemicals (GHS), and CLP classification in Europe. Technical Data Sheets Safety Data Sheets