Black & White STANDARD AND CUSTOM BLACK CONCENTRATES • High pigment concentrations for high tinting strength • Lower concentrations to meet specific customer needs • Tailored for special requirements, with specific physical/rheological properties STANDARD AND CUSTOM WHITE CONCENTRATES • TiO2 based with excellent opacifying or tinting strength • Optical white to improve the surface whiteness and/or brighteness of end articles • Regulatory compliance support • Optimal melt flow properties allow a good mixture with the polymer matrix yielding the best possible spinnability • Full pigment dispersion ensures maximum CPF/Spinning pack life • Carriers: PET, PBT, PA 6, PA 66, PP, and others • Continuous filament spinning, including fine denier (POY, FDY, HOY, bi-component yarns) • Long and short spinning staple fiber • Spunbond SINGLE PIGMENT DISPERSIONS (SPDS) We have extensive experience in using advanced technologies and special raw materials, which make our SPDs suitable for more demanding applications. Good spinnability • Full dispersion • Excellent tinting strength • Maximum fastness properties • Lot-to-lot consistency • Carriers: PET, PBT, PA 6, PP • Continuous filaments (POY, FDY, HOY, BCF) • Long and short spinning staple fiber Renol™ & Remafin™ Fiber Colorants Single Pigment Dispersions & Custom Colors Special Products Our portfolio includes color formulations for high-tenacity yarn applications. Product range • Flame retardants to reduce flammability of fibers and fabrics especially in building and construction applications • Light stabilizers to protect fibers used outdoors or exposed to sunlight against UV light • Antimicrobials to protect hygienic fiber products from bacteria proliferation • Antistatics to reduce electrostatic charges • Antioxidants to reduce polymer oxidation during spinning and protect fabrics during service life • Optical brighteners to provide a brilliant white effect and blueish hue • Electrets to retain electrostatic charge on the polymer surface for a longer period of time in filtration applications • Hydrophobics to impart durable water repellency • Chain extenders for recycled polyester fibers • Others on request Product characteristics • Good spinnability • Fiber-specific QC and protocols • Lot-to-lot consistency • Carriers: PET, PBT, PA 6, PP, and others • Possibility to combine colors and additives into a combination concentrate for convenience • Product guidance from our fiber expert team • Focus on safe and sustainable formulations • Continuous filaments (POY, FDY, HOY, BCF) • Long and short spinning staple fiber • Nonwoven processes (spunbond and meltblown) Cesa™ Fiber Additives MagIQ™ Liquid Fiber Colorants & Additives Multiple color production • Depending on the manufacturing set-up, several injection points can be added to enable multiple color production at the same time on a single extruder Batch size flexibility • Fiber producers can manufacture anything from a few kilograms to hundreds of tons using the same simple process Rapid color changes • No extruder contamination and easy color-on, color-off operation increases color change speed Waste reduction • Rapid color changes, precise metering and the ability to adjust color in-line reduces waste during color changeovers Continuous metering & long spin pack life • High pigment and dye concentrations mean fewer pack changes are required • Where color is running low for larger volume runs, low level metering sensors alert operators and packs can be changed without disrupting production In-line IV adjustment • Specialist additives are available to adjust Intrinsic Viscosity (IV) in-line for rPET applications • These additives are available as single products, or can be combined with color to create a multi- functional formulation Color design service • Avient offers a dedicated color design service to help shorten product development cycles and enhance market agility Liquid color processing • Formulations are stable at temperatures up to 60°C and retain good flow properties at temperatures as low as 10°C • These formulations can help lower yarn friction and abrasion, and there is no fuming or evaporation during production Avient’s liquid fiber colorant technology combines advanced liquid color formulations with state-of-the-art, high-pressure metering equipment to enable late-stage injection of liquid color for spun-dyed polymer melt.

该产品组合为PE基料，但可根据要求 提供PP基料。 法规支持 经过预测试的原材料： - ISO 10993-1 - USP 第、章（VI类） - USP （指南），6.2.3 可萃取元素； USP - ICHQ3D/USP 2 可萃取金属 - 欧洲药典 3.1 聚烯烃（如适用） FDA发布的注册药品管理档案（III类）和/或医 疗器械管理档案 食品接触符合FDA/EU*要求 主要特性 在三个通过ISO 13485认证的医疗生产线生产 全球统一的配方，提供全球一致性和供应链保 障 变更控制记录的不限于CAS编号级别，降低变 更风险 不含动物源性物质和邻苯二甲酸盐 标准母粒在PE载体中提供，可根据要求在PP 中提供 可以采用针对应用选择的特定树脂提供预着色 配方 药物类型 颜色说明 潘通色号参考 埃万特产品代码 （PE基） 肾上腺素能激动剂组合 浅绿色 373 C PE6M176349 肾上腺素能激动剂 紫色 2583 C PE4M176057 抗感染药 棕褐色 467 C PE8M176130 非甾体类抗炎药 灰色 冷灰色 4 C PE7M176184 甾体类抗炎药 粉色 197 C PE3M176237 免疫调节剂类抗炎药 橄榄绿 5763 C 按要求提供 β-受体阻滞剂 黄色 黄色 C PE1M176160 β-受体阻滞剂组合 深蓝色 281 C PE5M176272 碳酸酐酶抑制剂 橘黄色 1585 C PE2M176089 细胞毒素 黑色 6 C PL9M176008 缩瞳剂 深绿色 348 C PE6M176267 散瞳剂和睫状肌麻痹剂 红色 1797 C PE3M176236 前列腺素类似物 绿松石 326 C PE5M176273 适用医疗保健使用限制—见下文。 埃万特还针对容器/瓶子提供REMAFIN™ EP白色预着色配方和浓缩物， 以低密度和高密度PE和PP树脂形式供应。

TIER 1 SUPPLIER S E A T B U C K L E S Y S T E M • Rapid development of 3 colors for global OEM platform, for 3 materials (POM, SAN, PP) • Help Tier 1 transition from printing to laser marking of buckles • Develop formulation that offers laser marking solution plus color • Quick reaction to develop three colors for this global vehicle launch • Smartbatch™ color + laser marking formulation met requirements for critical safety components Smartbatch™ Combination Colorants & Additives KEY REQUIREMENTS WHY AVIENT?

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

REMAFIN EP White Masterbatches for Pharma Application Bulletin_CN * 可根据要求提供FDA/EU合规信息 用于药品包装的 REMAFIN™ EP 白色着色剂 应用公告 REMAFIN™ EP是一系列基于PE和PP的母粒，旨 在通过初级和次级药物包装的遮光来为口服、局 部、肠胃外、眼科和鼻腔用药提供保护。 主要特性 生产符合高于CAS编号级别的变更控制原则 （与MEVOPUR母粒类似），降低变更风险 不含动物源性物质和邻苯二甲酸盐 适用于吹膜、注塑、吹塑和挤出 注册药品主文件（III型） 食品接触符合FDA/EU*要求 法规支持 原材料根据以下法规测试： - ISO 10993-1 - USP第、章，包括VI级别，符合眼 科和鼻腔用药物要求 - 欧洲药典3.1.3/3.1.5（聚烯烃） - 美国药典（聚乙烯） - ICH Q3D 杂质元素 - USP和USP，透光率 载体材料 耐光性 热稳定性 产品代码颜料含量/类型 HDPE 50% TiO2 8 300°C PH00075525 LLDPE 60% TiO2 8 300°C PL00075542 LLDPE 70% TiO2 8 300°C PL00075545 PP 50% TiO2 8 300°C PP00075717 适用医疗保健使用限制—见下文。

GLOBAL VACUUM CLEANER BRAND B A T T E R Y P A C K & C O V E R • Flame retardance to conform to UL 94 V-0 at 0.75 mm • Easy to process and high-flow material to meet thin wall part design • Offered a UL 94 V-0 certified material to fulfill specific customer requests • Achieved excellent impact strength and good flexural modulus for added durability • Delivered an injection moldable PP with high flow to meet thin-wall demands Maxxam™ FR Flame Retardant Polyolefin Formulations KEY REQUIREMENTS WHY AVIENT?

GLOBAL CLOSURES PRODUCER T E Q U I L A C A P • A weighted material that could be injection molded • A material with evenly distributed weight • Suitable for over molding with a TPE to be used as a stopper in a tequila bottle • Formulated a 2.5 specific gravity weighted PP material that is FDA approved • Simplified processing steps and created an evenly balanced closure that was over- molded with a TPE • Expedited development of material to meet customer deadline Gravi-Tech™ Density Modified Formulation KEY REQUIREMENTS WEIGHT + PROCESSABILITY LEARN MORE Copyright © 2021, Avient Corporation.

Microsoft PowerPoint - OnColor Combination MIC Color - Lower Bumper - Application Snapshot AUTOMOTIVE OEM L O W E R E X T E R I O R B U M P E R • Develop a new color for molded-in-color plastics • Create ‘Wow’ effect without chroming or paint • Provide metallic aspect with good UV resistance for exterior part • Developed new “gris megalithe” color for PP (AS1) utilizing Avient Design center • Produced master plaques to showcase new color • Accelerated testing to certify outstanding weathering resistance • Collaborated across the supply chain to optimize metallic effect in the final part Smartbatch™ Combination Colorants & Additives KEY REQUIREMENTS WHY AVIENT?

ORTHOPEDIC PARTS MANUFACTURER O R T H O P E D I C S O L E I N S E R T • A super soft TPE (