In addition, the GLS TPE from Avient passed migration, extraction and sensory testing by Nehring Institute as required by food contact regulations (EU) 10/2011 and FDA 177.1210.

KEY CHARACTERISTICS • Excellent wear resistance • Reduced friction, heat build-up, noise and vibration • Improved processability and surface finish on parts • Lower power requirements and low maintenance • Design flexibility • Reduced weight APPLICATION BULLETIN SOLUTIONS AVAILABLE LubriOne™ Portfolio PA66, PA6 and Polyketone formulations with 10%–30% glass fiber reinforcement available Lubricants & Performance Lubricant Color Performance LubriOne NN PTFE Natural Shears and creates a PTFE film transferred to the matting surface.

DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

APPLICATION BULLETIN FILTER GRADE FILTRATION EFFICIENCY EPA 10/E10 85% EPA 11/E11 95% HEPA H12 99.5% HEPA H13 99.97% HEPA H14 99.975% HEPA H15 99.9975% HEPA H16 99.99975% ULPA H17 99.9999% EPA: efficient particulate air filtration HEPA: high efficiency particulate air filter ULPA: ultra-low penetration air filter www.avient.com Copyright © 2021, Avient Corporation.

On its manufacturing lines, the transition to Colorant Chromatics fluoropolymer color concentrates helped slash its scrap rate from 10% to less than 5%.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

Buyer must notify Seller of such acquisition within 10 (ten) days eller på anden måde. Køber skal underrette Sælger om en sådan erhvervelse inden for 10 (ti) dage. Within 10 (ten) days after receipt of such notice, Seller may exercise its right to terminate the order confirmation by giving Buyer written notice. 19.

SUSPENSION AND TERMINATION 10. TERMS ADJUSTMENT; DELIVERY 10. AUSSETZUNG UND BEENDIGUNG 10.

In 2023, 10% of the Company's annual incentive bonus was tied to specific sustainability targets aligned with our sustainability goals. Rathbun 2/08/2021 — — — — — 5,417 225,185 2/14/2022 — — — — — 4,794 199,287 2/17/2023 — — — — — 7,036 292,487 2/4/2015 2,500 — — 38.27 2/4/2025 — — 2/10/2016 10,400 — — 24.98 2/10/2026 — — 2/15/2017 10,100 — — 34.10 2/15/2027 — — 2/14/2018 10,400 — — 41.89 2/14/2028 — — 2/11/2019 17,150 — — 31.54 2/11/2029 — — 2/10/2020 19,200 — — 31.48 2/10/2030 — — 2/08/2021 13,433 6,717 — 42.27 2/08/2031 — — 2/14/2022 — — 16,000 52.64 2/14/2032 — — 2/17/2023 — — 23,250 42.93 2/17/2033 — — L.K. Beggs, the stock awards include RSUs that were granted on February 10, 2020 and vested on February 10, 2023.

In the event of a force majeure, Seller has no obligation to purchase material for resale to Buyer, and no liability for cost to cover incurred by Buyer. 10. Except in the case of a force majeure, if not satisfied with Seller’s determination, Buyer as its sole remedy shall have a right to terminate this contract without further obligation upon: (i) 10 days written notice; and (ii) payment for all Product received to date. 12. En caso de Fuerza Mayor, el Vendedor no tiene la obligación de comprar el material para su reventa al Comprador, y no se hace responsable por el costo incurrido a cubrir por el Comprador. 10.