KEY CHARACTERISTICS • Design for shelf life, ergonomics and differentiation • Lighter weight bottles • Lower system cost vs. other rigid packaging TARGET MARKET AND APPLICATIONS UHT Dairy Packaging TECHNOLOGY BENEFITS • 100% visible light blocking for monolayer containers • Recyclable with general PET waste stream, even though additive is also present • Lower system cost • Offers shape differentiation for containers • Enables container designs that increase ease of pouring • Useful for re-sealable containers • Useful for containers that can be stored flat after opening • Offers light-weighting for PET bottle without reducing light blocking performance www.avient.com Copyright © 2020, Avient Corporation.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal-derived substances • Available as pre-colored formulation or concentrate and for use in different polymers REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU** APPLICATION BULLETIN * Design note: Effect colors require careful consideration of part design and polymer flow paths to minimize visible flow lines.

KEY CHARACTERISTICS • Can be formulated for PESU, PPSU, and PSU • 43 standard colors as well as custom colors available • Ultra-high heat resistance • Based on raw materials pretested per ISO 10993 • Range of brilliant, vibrant colors • Based on raw materials compliant with food contact • Customizable with functional additive solutions • Based in polysulfone resins for ultra-high performance; may be formulated for other resin types • Low minimum order quantities available MARKETS AND APPLICATIONS Transcend colorants are formulated specifically for the healthcare market, and ideal for applications such as: • Dental tools and equipment • Surgical robots • Surgical lighting • Diagnostic equipment PRODUCT BULLETIN & COLOR CARD Colors may vary from actual color shown.

KEY CHARACTERISTICS • No wetting agents, no surfactants, no glycol • Consistent tint strength and color • Minimized settling APPLICATIONS Stan-Tone WDN dispersions are suitable for use in a variety of applications, including: • Latex gloves and dipped balloons • Coating and adhesive systems Stan-Tone Code Pigment Type Approx. % Pigment Approx. % Solids Color Index pH Typical Weight Lbs/Gal WHITE 10WDN03 Titanium Dioxide, Rutile 60 73 PW-6 9 16.7 YELLOW 12WDN01 Diarylide AAOT GS 35 43 PY-14 8.8 9.4 12WDN02 Diarylide HR RS 37 44 PY-83 8.8 9.6 12WDN03 Arylide GY RS 38 45 PY-74 8.8 9.2 81WDN01 Iron Oxide 55 63 PY-42 8.8 14.5 ORANGE 15WDN01 Pryazolone YS 40 45 PO-13 8.8 9.2 15WDN03 Dianisidine RS 35 37 PO-16 8.8 9.2 15WDN06 DNA Orange RS 31 43 PO-5 8.8 9.7 RED 22WDN01 Lithol Rubine BS 33 40 PR-57 8.8 9.8 21WDN01 Naphthol BS 35 43 N/A 8.8 9.5 25WDN01 Red 2B, Ca BS 34 41 PR-48:2 8.8 9.6 28WDN01 Red 2B, Ba YS 36 44 PR-48:1 8.8 9.5 82WDN02 Iron Oxide 57 66 PR-101 8.8 16 BLUE 40WDN01 Phthalocyanine RS 35 46 PB-15 8.8 9.7 40WDN03 Phthalocyanine GS 38 43 PB-15:3 8.8 9.8 GREEN WDN-27822 Phthalocyanine BS 42 53 PG-7 8.8 10.5 VIOLET/MAGENTA 24WDN02 Carbazole 35 48 PV-23 8.8 9.6 24WDN03 Quinacridone 31 39 PV-19 8.8 9.6 24WDN05 Quinacridone 30 41 PR-122 8.8 10 BLACK 90WDN01 Carbon Black 45 49 PB-7 8.8 9.3 WDN RS = Red Shade YS = Yellow Shade BS = Blue Shade GS = Green Shade HR = Heat-Resistant www.avient.com Copyright © 2020, Avient Corporation.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates and ready-to-use formulations REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS DRUG DELIVERY DEVICES SYRINGES & NEEDLES DIAGNOSTICS CATHETERS Clarifying PP Sorbitol-free for transparent applications with reduced migration and improved thermal stability     Lubricant— permanent/ non-migrating Fast acting reduction in friction for wide variety of polymers such as PP, ABS, POM, PC    Protection from UV in transparent applications for PP, PE, PETG, COP UV blocking in 290-450nm with no impact on clarity; can be combined with colors (e.g., amber)   Antistatic ready-to- use solution for PP, ABS, PC/ABS Permanent/non-migrating; fast decay time independent of % relative humidity  Gamma/e-beam sterilization protection of the polymer Preserving the properties of PP and COC/COP; reduction in yellowing using Color Compensation Technology (CCT)    Reduced material consumption/cycle time—nucleation Fast acting new generation nucleant for PE and PP; improved thermal and mechanical properties allows wall thinning; reduction of tolerance/dimensional problems between different colors    Laser marking replacing ink printing/labels Solvent-free, high-speed identification for Nd/YAG laser for PE,PP, ABS, PC, POM     Antioxidants for PE, PP, TPE Thermal protection during converting/downstream sterilization    Brand protection/ anticounterfeit Covert and non-covert systems   Healthcare use limitations apply—see below.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Available for use in a wide range of polymers including polyolefins, styrenics, polycarbonate and alloys, polyester, POM • Functionality can be combined with colorants into convenient combination concentrates or formulations REGULATORY SUPPORT • Pre-tested raw materials: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request FUNCTIONALITY TARGET APPLICATIONS EBM/IBM CONTAINERS CLOSURES FILM COMBINATION DEVICES Clarifying PP Sorbitol-free—possibilities in packaging ocular solutions    Slip/torque reduction Slip for PE, PP films, processing aid, torque reduction for closures   Protection from UV in transparent packaging for PP, PE, PETG, COP UV blocking in 290–450nm with no impact on clarity    Antistatic ready-to-use solution for PE films e.g.

KEY CHARACTERISTICS • Wide range of opaque and translucent colors including standard colors (see examples in color chart).

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request.

PP, PE, PS, PVC No Good Foam PP Better, larger cells with lower cell density in standard IM processes; suitable for cell nucleation in structural foam processing PP, PE, PS, PVC Yes Better FA-110 Best cell structure with higher cell density; provides better structural integrity and lower density in standard IM processes PP, PE, PS, PVC Yes Best KEY CHARACTERISTICS Excelite IM formulations provide injection molders with: • Material density and weight reduction • High concentration of active CFA • Improved distribution of CFA into polymer matrix • High cell density with tight cell structure • Control over consistency and accuracy • Reduced sink marks • Ability to improve flow of material • Cycle time reduction • Improved dimensional stability • Improved thermal insulation EXCELITE IM – PRODUCT FORMULATIONS www.avient.com Copyright © 2020, Avient Corporation.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Standard concentrates in a PE carrier and on request in PP • Pre-colored formulations can be supplied in specific resins selected for the application REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN DRUG TYPE COLOR DESCRIPTION PANTONE REFERENCE AVIENT PRODUCT CODE PE BASED Adrenergic agonist combinations Light Green 373 C PE6M176349 Adrenergic agonists Purple 2583 C PE4M176057 Anti-infectives Tan 467 C PE8M176130 Anti-inflammatory, nonsteroidal Grey Cool Grey 4 C PE7M176184 Anti-inflammatory, steroids Pink 197 C PE3M176237 Anti-inflammatory, immunomodulators Olive Green 5763 C On request Beta-blockers Yellow Yellow C PE1M176160 Beta-blocker combinations Dark Blue 281 C PE5M176272 Carbonic anhydrase inhibitors Orange 1585 C PE2M176089 Cytotoxic Black 6 C PL9M176008 Miotics Dark Green 348 C PE6M176267 Mydriatics and cycloplegics Red 1797 C PE3M176236 Prostaglandin analogues Turquoise 326 C PE5M176273 Healthcare use limitations apply—see below.