GEON HTX LA425 GRAY (#11136269) X ST-16206-02-01 Natural GEON W9300 NAT 0000

3060 299 Natural Dipping Latex GEON M6307 GRAY GEON W9300 NAT 0000

R230AE Natural GEON M5240 GRAY 2400 GEON W9300 NAT 0000

GEON A5501 BLUE R3280M NATURAL GEON W9300 NAT 0000

Other textural influences include the colorful layers of rusted paint on boat bottoms, and the choppy nature of crashing surf. Luxury Paradox introduces a new shift in extravagance, where nature is favored over machine. As natural resources become depleted around the world, their use becomes coveted.

GEON 90453 TAN 3145 JJP630A NATURAL 1000 UD GEON W9300 NAT 0000

NEUView UR72D20-2003 Natural-5729-01-6 GEON E7130 TAN GEON W9300 NAT 0000

Follow up by purging machine with general purpose PP • Residence time should not exceed 5 minutes for Maxxam FR products • General ventilation is suggested Shut Down • Purge the equipment with a general purpose PP • All tooling and equipment must be free of any residual Maxxam FR upon shut down • Continue generating parts made from the natural PP until clear • Wipe down tool steel with mold cleaner • When using a hot runner system, care must be taken to remove residual product from the manifold MOLD DESIGN RECOMMENDATIONS Cold Slug Wells • Place cold slug wells at the base of the sprue to capture the cold material first emerging from the nozzle • Place cold slug wells at every 90° bend in the runner system • Well depths approximately 2–3 times the diameter of the runner provide best results Draft Angle • Draft angle should be 1/2°–1° per side. Only naturally balanced runner systems (“H” pattern) are recommended • Each 90° bend in the system should step down in size • Vents should be placed at the intersection of each 90° bend off of the cold slug well and vented to atmosphere • Hot runner molds are acceptable and should be sized by the manufacturer.

NYMAX™ BIO BIO-BASED POLYAMIDE SOLUTIONS PROCESSING GUIDE 1 NYMAX BIO Formulated in glass fiber-filled or unfilled materials, Nymax™ BIO formulations utilize between 16 and 47 percent natural filler from renewable plant-based raw materials, reducing the carbon footprint value significantly at the beginning of the product lifecycle. Only naturally balanced runner systems (“H” pattern) are recommended. 3.

LX-N-1205-A NATURAL MOLDING LATEX GEON M6220 NAT 0000 GEON W9300 NAT 0000