In terms of impact resistance, at equivalent levels of reinforcement and using the same matrix material, an LFT formulation is typically about 70 percent higher than that of a short-fiber formulation, and it also has greater stiffness.

Available Deniers 200, 380, 400, 750AP, 800AP, 1000, 1000AP, 1420, 1500, 1500AP, 1500BK(Black), 2160, 2250, 2840, 3000, 7100.

Product ID FIBER-LINE® Coating Base Fiber Nominal Break Strength Nominal Yield Description G675/Colors FIBER-LINE® Colorcoat™ E-Glass 60 LBs (27 KGs) 1897 FT/LB (1274 M/KG) Color formula designed to be compatible with customer specific resin matrix K1420 FIBER-LINE® Flamecoat™ Kevlar® 65 LBs (29 KGs) 6872 FT/LB (4616 M/KG) Flame retardant coating suppresses flame and smoke K1500 FIBER-LINE® Protexcoat™ FIBER-LINE® Colorcoat™ Kevlar® 69 LBs (31 KGs) 8770 FT/LB (5892 M/KG) Kevlar® coated with UV inhibitors and carbon black pigment for UV protection K14200 FIBER-LINE® Repelcoat™ Kevlar® 650 LBs (294 KGs) 877 FT/LB (588 M/KG) Water repellant coating used in ballistic fabric applications V3000T N/A Vectran® 195 LBs (88 KGs) 4390 FT/LB (2950 M/KG) Twisted to improve processing POPULAR INDUSTRIAL FABRIC YARN PRODUCTS MOVING HIGH PERFORMANCE FIBERS FORWARD LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

They are typically used in the outer layer and can be combined with color (e.g. black) in a single product for convenience.

KEY CHARACTERISTICS • Designed for Nd:YAG lasers operating between 1060-1070 nm • Available for different polymers including PP, PE, PC, PBT, POM, ABS, MABS • Manufactured at four ISO 13485 certified sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Can be designed for dark marking on natural or white/light colored background or light marking on black/dark background REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) and/or Device Master File • Food contact established with FDA/EU* APPLICATION BULLETIN * FDA/EU compliance information available upon request.

Cloud Grey US OC7SAG Mink US OC9SAE Dusk US OC5SAA Chocolate Brown US OC8SAH Terracotta US OC8SAI Light Brown US OC8SAJ Mushroom US OC8SAK Mid Brown US OC8SAL Dark Brown US OC8UFK Mahogany US OC8ASM Rosewood US OC8SAN Toffee US OC8SAP Honey Beige US OC8SAQ Chestnut Brown US OC8SAR Beige US OC8SAS Deep Black US OC9UFA Ebony US OC9SAD METALLICS Gold US OC8SAD Aztec Gold US OC8SAE Copper US OCCSAD Silver US OC7UFA Pewter US OC7SAD FLUORESCENTS Fluorescent Yellow US OC1SAD Fluorescent Pink US OC3SAG Fluorescent Green US OC6SAJ 1.844.4AVIENT www.avient.com Copyright © 2023, Avient Corporation.

VERSAFLEX™ VDT 4202-40B DYNAFLEX™ G7940 Defining Characteristic Vibration damping Vibration isolation What it Does Dampens vibrations,and specifically minimizes appliance walking Isolates vibrations, which reduces overall movement of the appliance Tactile Feel Grippy feel Soft touch, rubbery feel Coloring Black Natural Hardness 40 Shore A 40 Shore A Overmolding Substrate Polypropylene Polypropylene HOME APPLIANCE SOLUTIONS REDUCE MOVEMENT OF TOP LOAD WASHING MACHINES WITH TPES FOR ANTI-VIBRATION FEET EXAMPLES OF APPLICATION-SPECIFIC MATERIALS AND DESIGN SUPPORT DynaflexVersaflex VDT Polypropylene HOW OUR TPES MAKE THE DIFFERENCE IN TOP LOADING WASHING MACHINE ANTI-VIBRATION FEET Lower the number of service calls – Our TPEs for anti-vibration feet reduce appliance movement and walking during use, thus lowering the number of service calls and reducing costs.

KEY CHARACTERISTICS • Manufactured at four ISO 13485 certified manufacturing sites, providing global consistency and increased security of supply • Documented change control beyond CAS number, reducing risk of change • Non-phthalate and formulated without animal- derived substances • Standard concentrates in a PE carrier and on request in PP • Pre-colored formulations can be supplied in specific resins selected for the application REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 and USP biological evaluation - European Pharmacopeia 3.1.3/3.1.5 (polyolefin) - USP (polyethylene) - ICH Q3D elemental impurities • Registered Drug Master File (Type III) • Food contact established with FDA/EU* APPLICATION BULLETIN DRUG TYPE COLOR DESCRIPTION PANTONE REFERENCE AVIENT PRODUCT CODE PE BASED Adrenergic agonist combinations Light Green 373 C PE6M176349 Adrenergic agonists Purple 2583 C PE4M176057 Anti-infectives Tan 467 C PE8M176130 Anti-inflammatory, nonsteroidal Grey Cool Grey 4 C PE7M176184 Anti-inflammatory, steroids Pink 197 C PE3M176237 Anti-inflammatory, immunomodulators Olive Green 5763 C On request Beta-blockers Yellow Yellow C PE1M176160 Beta-blocker combinations Dark Blue 281 C PE5M176272 Carbonic anhydrase inhibitors Orange 1585 C PE2M176089 Cytotoxic Black 6 C PL9M176008 Miotics Dark Green 348 C PE6M176267 Mydriatics and cycloplegics Red 1797 C PE3M176236 Prostaglandin analogues Turquoise 326 C PE5M176273 Healthcare use limitations apply—see below.

VERSAFLEX™ VDT 4202-40B DYNAFLEX™ G7940-1 Application Anti-Vibration Feet Anti-Vibration Feet Defining Characteristic Vibration Damping Good Processability Compression Set Low Compression Set Low Compression Set Tactile Feel Grippy Feel Soft Touch, Rubbery Feel Coloring Black Natural Hardness 40 Shore A 40 Shore A Processing Injection Molding Injection Molding Overmolding Substrate Polypropylene Polypropylene HOW GLS TPEs MAKE THE DIFFERENCE IN HOME APPLIANCE ANTI-VIBRATION FEET • Reduced appliance movement and noise – vibration damping technology reduces movement and noise of the appliance when in use • Resistance to wear and tear – TPEs are proven to maintain their shape and resist tears with low compression set • Better performance and function – increase design freedom with material selection flexibility • Improved processability – boost efficiency with injection molding processing and reduce overall production cycle time and costs • Reduced number of part defects – eliminate secondary operations to achieve consistent and controlled results To learn more about GLS TPEs home appliances, visit www.avient.com or call +1.844.4AVIENT (1.844.428.4368).

EXTRUDER Screw 3/4" to 6" Polyethylene type—Single flight, no mixing section, 1.5–2:1 compression ratio Tooling Semi-Pressure type: 30°–40° angle Die On size with 1/8" or less land L/D 24:1 recommended Screen Pack No screen pack (Optional depending on pressure) Cooling Trough 120–150°F (50–65°C) recommended Feeder Gravimetric type preferred—3 compartment for cross-linked Dryer Desiccant type, 4 hours at 160°F (70°C) For ECCOH™ compound only; never put Dry Silane in Dryers PROCESSING Temperature ECCOH 5000 Series ECCOH 6000 Series Wire Preheat 180–250°F (80–120°C) 180–250°F (80–120°C) Feed Zones 200°F (93°C) 275°F (135°C) Transition 275°F (135°C) 325°F (163°C) Metering 300°F (150°C) 375°F (190°C) Head/Die 330°F (165°C) 420°F (215°C) Target Melt 330–340°F (165–170°C) 420–440°F (215–225°C) Flame at Die Tip Yes—as needed Line Speed Shear sensitive: Observe Melt Temperature, Motor Amperage, and Pressure Purge Compound HDPE Copyright © 2020, Avient Corporation.