CLEVELAND – March 18, 2019 – In a perfect world, all could see clearly into the future.

Reduce Die Build-Up, Improve Surface Finish They provide lubricity during processing to reduce unwanted die build-up and allow a smooth surface finish. Prevents melt fracture (sharkskin) for a smoother surface finish

For more information, see Create Custom Views section in this guide. 3 POs can have the following statuses: Status Description Buyer Hold The PO is approved but pending buyer review Cancelled The PO is cancelled and does not need to be fulfilled Closed The issued PO was received and then closed, either manually or automatically within Coupa Currency Hold The PO is on hold due to a currency exchange rate issue Issued The PO was approved and sent to you (the supplier) Soft Closed The PO is closed but can be reopened. The Purchase Order Lines table shows the following information for all the PO lines: 4 For your custom view, you also add the following additional information: ASN lines, carrier, confirmed quantity, delivery date, invoiced, line level text, need by date, received, ship method, ship note, shipment date, shipped quantity, and tracking number. You can use the following settings when creating or editing a custom view for a CSP table. 4.

Committees: 1, 4 KIM ANN MINK, Ph.D. Former Chairman, President and Chief Executive Off icer, Innophos Holdings, Inc. Environmental, Health and Safety 4.

All Avient manufacturing facilities comply with applicable regulatory requirements regarding emissions limits and hold valid air permits where required.

While standard TPEs produce great tactile finishes, they have poor compatibility with cosmetic ingredients. Add a wide range of tactile finishes and surface textures Chemically compatible TPEs enable you to develop a wide range of finishes such as silky, smooth, tacky and grippy.

POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. Unidirectional Tape 3-Ply 0˚/90˚/0˚ 6-Ply X-Ply™ 0˚/90˚ 4-Ply 0˚/90˚/90˚/0˚ Honeycomb Core, X-Ply™ Skins Uni Tape with Scrim 10-Ply with Film LAMINATION LAY-UP CONFIGURATIONS 4-Ply 90˚/0˚/0˚/90˚ with Film 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

Reinforce all panel seams with a minimum 4 inch (10.16 cm ) batten of additional ballistic panel material. Panels can be finished by covering with drywall, paneling, painting, or wall covering. When applicable, fire tests shall be performed on a finished wall system.

Looking forward, Avient’s Sustainable Sourcing Program is developing a framework to hold our partners accountable to improve upon their sustainable supply chain, including analyzing areas of risk such as quality, environmental, social, geopolitical financial, conflict minerals, and more. Avient holds this process as a standard with all suppliers, thus reducing third-party supply chain risk.

COLOR, MATERIAL & FINISH PLAY A CRUCIAL ROLE IN INFLUENCING CONSUMER PERCEPTION. Finding a color, material and finish that catches the eye and sets you apart from your competition is vital. STAYING AHEAD OF TRENDS2 1 3 4 5 WHAT ARE THE NEWEST POLYMER TECHNOLOGIES?