Backed by robust bio-compatibility pre-testing, healthcare quality systems, and change control standards, these ‘medical grade’ concentrates and pre-color formulations can help minimize risk and avoid high costs of non-compliance.

 Audits must be conducted during normal business hours Ethics - Code of Conduct Avient has its own ethics policy – The Avient Code of Conduct which establishes a clear set of ethical and behavioral standards for business conduct by all Avient associates. The Avient code of conduct is available here.

Clarifiers and impact resistant additives for high clarity packaging that performs Impress™ High Gloss Colorants - Product Bulletin (Chinese) OnColor™ Impress™ High Gloss Metallic Effect Colorants (English)

Clarifiers and impact resistant additives for high clarity packaging that performs Impress™ High Gloss Colorants - Product Bulletin (Chinese) OnColor™ Impress™ High Gloss Metallic Effect Colorants (English)

These materials utilize long fiber technology and exhibit enhanced shielding effectiveness versus standard short fiber conductive polymers. TEMPERATURE Material Rear Center Front Nozzle Melt Mold Nylon 6,6 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) Nylon 6,6 30% SS 540–570 530–560 530–560 540–570 540–570 200–300 (90–150) PBT 510–410 (265–280) 490–540 (255–280) 480–530 480–530 480–530 150–250 (65–120) PC 14% NiCF 540–570 540–570 530–560 530–560 530–560 150–250 (65–120) ABS 470–520 460–520 460–520 460–530 (240–275) 460–530 (240–275) 100–200 (40–90) PP 440–480 (225–250) 440–480 (225–250) 430–470 (220–245) 420–460 (215–240) 420–460 (215–240) 125–175 (50–80) DRYING Material Temperature °F (°C) Time Minimum Moisture Maximum Moisture Nylon 6,6 14% NiCF 180 (80) 4–5 hours 0.05% 0.20% Nylon 6,6 30% SS 180 (80) 4–5 hours 0.05% 0.20% PBT 14% NiCF 250 (120) 6-8 hours 0.02% 0.03% PC 14% NiCF 250 (120) 3–4 hours 0.02% 0.02% ABS 14% NiCF 200 (90) 2–4 hours 0.05% 0.10% PP 14% NiCF 180 (80) 2–4 hours 0.20% 0.30% Equipment • Feed throats smaller than 2.5" may cause bridging due to pellet size - Larger feed throats will be more advantageous with long fiber EMI shielding resins • General purpose metering screw is recommended - Mixing/barrier screws are not recommended • L/D ratio - 18:1–20:1 (40% feed, 40% transition, 20% metering) • Low compression ratio - 2:1–3:1 • Deep flights recommended - Metering zone 3.5 mm - Feed zone 7.5 mm • Check ring - Three-piece, free-flowing check ring • General purpose nozzle (large nozzle tips are recommended) - Minimum orifice diameter of 7/32" - Tapered nozzles are not recommended for long fiber EMI shielding resins • Clamp tonnage: - 2.5–5 tons/in2 Gates • Large, free-flow gating recommended - 0.25" x 0.125" land length - 0.5" gate depth Runners • Full round gate design • No sharp corners • Minimum of 0.25" diameter • Hot runners can be used PROCESSING Screw Speed Slower screw speeds are recommended to protect fiber length Back Pressure Lower back pressure is recommended to protect fiber length Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) PROCESS CONSIDERATIONS Recommended – retain fiber length (maximize conductivity) • Low shear process • Low screw speed and screw RPM • Slow Injection speed • Fill to 99–100% on first stage of injection - Reduces potential nesting of fibers at gate location - Improves mechanical performance near gate location - Promotes ideal fiber orientation Resin Rich Surface • Achieved when using a hot mold temperature and longer cure times ≥ Max mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could reduce attenuation performance in an assembly Fiber Rich Surface • Achieved when using a cold mold temperature and shorter cure times ≤ Minimum mold temperature recommendation • Improved surface aesthetic • Reduced surface conductivity • Could improve attenuation performance in an assembly www.avient.com Copyright © 2020, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

 Audits must be conducted during normal business hours Ethics - Code of Conduct Avient has its own ethics policy – The Avient Code of Conduct which establishes a clear set of ethical and behavioral standards for business conduct by all Avient associates. The Avient code of conduct is available here.

Clarifiers and impact resistant additives for high clarity packaging that performs Impress™ High Gloss Colorants - Product Bulletin (Chinese) OnColor™ Impress™ High Gloss Metallic Effect Colorants (English)

Clarifiers and impact resistant additives for high clarity packaging that performs Impress™ High Gloss Colorants - Product Bulletin (Chinese) OnColor™ Impress™ High Gloss Metallic Effect Colorants (English)

CASE STUDY: FIBER-LINE™ HIGH PERFORMANCE ENGINEERED FIBERS Challe nge Accepted. INNOVATIVE CARBON FIBER SOLUTIONS FOR SG PIPE REPLACEMENT To learn more about Fiber-Line high performance engineered fibers, visit fiber-line.com. PlastiComp™ then took the carbon tows and formed a high-strength tape coated with an adhesion promoting layer, a critical component of the renewal system.

ATTENDANCE AND PARTICIPATION Our Annual Meeting will be conducted on the internet via live webcast. To gauge how associates at Avient feel about our culture, we conduct employee engagement surveys. CODE OF ETHICS, CODE OF CONDUCT AND CORPORATE GOVERNANCE GUIDELINES In accordance with applicable NYSE listing standards and SEC regulations, the Board has adopted a Code of Ethics, Code of Conduct and Corporate Governance Guidelines.