AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

Processing Guidelines Base Resin PA6 Barrel Temperatures °F °C Rear Zone 440–470 227–243 Center Zone 450–480 232–249 Front Zone 460–490 238–254 Nozzle 470–500 243–260 Melt Temperature 470–500 243–260 Mold Temperature 120–180 49–82 Pack and Hold Pressure 50–75% of Injection Pressure Injection Velocity 0.5 in/s–3 in/s 13 mm/s–76 mm/s Back Pressure 50–100 psi 3.4–6.9 Bar Screw Speed 30–70 rpm Cushion 0.25 in 6.35 mm Drying Parameters 2–4 Hours @ 180°F 2–4 Hours @ 82°C Moisture % Allowable 0.08–0.18%* Screw Type General Purpose Screw Screw Compression Ratio 2.0:1– 2.5:1 Screw L/D 20:1 Non-return Check Valve Free Flow Check Ring Nozzle Type Reverse Taper Clamp Pressure 2–3 Tons/in² Barrel Capacity 30-80% of barrel should be used * Avient suggests measuring moisture using a Karl Fischer method or Vapor Pro® moisture analyzer that titrates only for moisture.

BASE RESIN ABS Drying Temperature 80–90°C Drying Time 2–3 Hours Barrel Temperatures °C Rear Zone 180–210 Center Zone 190–220 Front Zone 200–230 Nozzle 210–240 Mold Temperature 50–80 Screw Speed Moderate Back Pressure 3–10 bar Cushion 5–15 mm Injection Speed Low to medium Injection Pressure Moderate to high Holding Pressure 10–30% of injection pressure Screw Type General purpose Screw L/D 20:1 Screw Compression Ratio 2.0:1–2.5:1 Non-return Check Valve Free flow check ring Nozzle Type Reverse taper Barrel Capacity 30–80% of barrel should be used STARTUP & SHUTDOWN RECOMMENDATIONS Purge Compound 2–3 melt flow PP or purging compound.

BASE RESIN PPA PC PSU PES PPS CO- POLYMER ACETAL PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 520–560 (271–293) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 530–570 (277–299) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 550–580 (288–305) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 550–600 (288–316) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 560–600 (293–316) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 150–225 (66–107) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 300 (150) 4 hrs @ 250 (121) 2 hrs @ 200 (93) 3 hrs @ 300 (150) 4 hrs @ 180 (82) Allowable Moisture % < 0.05 < 0.02 < 0.02 < 0.04 < 0.02 0.15–0.20 < 0.02 0.10–0.20 Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties.

PR 254 Opaque RED LAKE C YS C.I. SPECTROPHOTOMETER CONFIGURATION FOR COA Type: Datacolor Illuminate: D65 Daylight Observer: 10 degree, large area view, specular included EXPLANATION OF SPECTROPHOTOMETRIC VALUES DL* Lightness/Darkness Difference (Delta L*) The shade of gray (black/white) + = Lighter - = Darker Da* Red/Green Color Difference (Delta a*) + = Hue is redder (or less green than) - = Hue is greener (or less red than) Db* Yellow/Blue Color Difference (Delta b*) + = Hue is yellower (or less blue than) - = Hue is bluer (or less yellow than) DC* Difference Attributed to Chromaticity (Delta C*) + = More saturated than (more color intensity) - = Less saturated than (less color intensity) DH* Difference Due to Hue Only (Delta H*) DE* Total Color Difference (Delta E*) DE is a mathematical calculation utilizing the DL*, Da* and Db*, and therefore, used alone this number can be misleading as to the true color of a material.

VERSAFLEX™ HC MEDICAL TUBING GRADES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Traditional and bio- based formulations specifically for biopharmaceutical tubing to meet the needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals VERSAFLEX™ CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC Medical Tubing Grades Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizers Versaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versalfex™ HC BIO BT218 Natural 70A 0.88 18 58 416 2.87 668 4.60 1190 8.20 630 - - ✔ ✔ Weldable, kink resistant, contains 40% bio-derived content (Gen 1 biomass) Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aesthetics Versalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Versaflex™ OM 8940X-1 Clear 42A 0.91 - - 233 - 311 - 1573 - 1059 - - - - PK, COPE overmold Versaflex™ OM 4052 Natural 56A 1.01 27 - 271 - 557 - 1680 - 670 - - ✔ - Excellent chemical resistance; PK, PC, ABS, PC/ABS overmoldVersaflex™ OM 4063 Natural 54A 1.12 30 - 365 - 580 - 1640 - 670 - - ✔ - Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi MPa ASTM psi MPa ASTM psi ISO MPa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

Patterson President and Chief Executive Officer Kurt Schuering Vice President, Global Key Account Management Bradley C Richardson Executive Vice President and Chief Financial Officer Cathy K. Patterson 8:15-8:30 AM Financial Highlights and Goals Bradley C. S&P 500 All time high of $39.55 May 13th, 2014 PolyOne Corporation Page 12 2006 Q1 2014 2015 “Where we were” “Where we are” Target 1) Operating Income % Specialty: Global Color, Additives & Inks 1.7% 13.8% 12 – 16% Global Specialty Engineered Materials 1.1% 11.6% 12 – 16% Designed Structures & Solutions -- 6.5% 8 – 10% Performance Products & Solutions 5.5% 7.7% 9 – 12% Distribution 2.6% 6.1% 6 – 7.5% 2) Specialty Platform % of Operating Income 6.0% 64% 65 – 75% 3) ROIC* 5.0% 9.4% 15% 4) Adjusted EPS Growth N/A 42% Double Digit Expansion Proof of Performance & 2015 Goals *ROIC is defined as TTM adjusted OI divided by the sum of average debt and equity over a 5 quarter period PolyOne Corporation Page 13 Bridge to $2.50 Adjusted EPS by 2015 2015 EPS: $2.50 2013 EPS: $1.31 Continued Gross Margin Expansion Mergers & Acquisitions Spartech Accretion Incremental Share Buybacks Ongoing LSS Programs (50-100 bps/yr) Accelerated Innovation & Mix Improvement Several Levers to Drive Growth Mid Single Digit Revenue CAGR PolyOne Corporation Page 14 Financial Highlights Bradley C.

基础树脂 GRAVI-TECH™ 密度改性配方 注塑成型参数 TBPAPSBA 料筒温度 °F (°C) 后段 400–475 (200–250) 430–500 (220–260) 480–520 (250–270) 中段 410–480 (205–253) 440–510 (225–265) 483–522 (252–272) 前段 420–490 (210–257) 450–520 (230–270) 487–527 (254–274) 喷嘴 425–500 (215–260) 460–530 (235–275) 490–530 (255–275) 熔体温度 425–515 (215–270) 530–580 (276–300) 500–565 (260–300) 模具温度 140–200 (60–90) 150–200 (65–90) 140–250 (60–120) 干燥参数 190 (90) 2–4 小时 0.01%–0.15% 180 (80) 4–5 小时 0.10%–0.20% 275 (135) 3–4 小时 0.02%–0.04% 喷嘴类型 注塑压力 背压 螺杆转速 缓冲料垫 通用 尼龙或倒锥形 通用 注塑速度1 2.0–5.0 in/sec; 50–125 mm/sec 2,000–4,000 psi; 13,000–30,000 kpa 0–50 psi; 0–350 kpa 25–75 RPM 0.125"–0.250"; 3.175 mm–6.35 mm 螺杆压缩比 2 2.0:1–2.5:1 2 Gravi-Tech Gravi-Tech™ 聚合物金属复合材料属于高密度材料， 是铅和其他传统金属的热塑性替代材料。 降低模具温度C 5. 去除浇口尖角C 3.

AFNOR M 2 in France, DIN 4102 B 2–B 1 in Germany, UNI 8457–9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3–5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.