TECHNICAL BULLETIN UV RESISTANCE • UV testing: QUV-A Test, 0.68 @ 45C • Comparable results to traditional TPEs reSound OM 5510-45N reSound OM 5510-60N Bio-derived Content (%) 40% 50% Hardness, Shore A 45 60 Delta E after 150 hrs. 0.22 0.23 Delta E after 300 hrs. 1.68 0.56 AGING – BONDING STRENGTH ONTO ABS reSound OM 5520-55N Room Temperature 70C Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 54 55 56 OM Substrate ABS ABS ABS ABS ABS ABS ABS OM Avg. Peel, PLI 12 19 23 20 19 reSound OM 5510 for PP reSound OM 5510-60N Room Temperature 70C Bio-derived Content (%) 50% 50% 50% 50% 50% 50% 50% Hardness, Shore A 60 60 60 60 60 60 60 Specific Gravity 0.89 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 247 241 244 251 234 244 240 100% Modulus, PSI 343 333 338 339 321 331 326 Tensile Strength, PSI 625 621 647 610 633 662 642 Elongation, % 306 314 309 313 312 315 315 Tear Strength, PLI 109 108 113 113 111 117 115 reSound OM 5520-55N Room Temperature 70C Bio-derived Content (%) 49% 49% 49% 49% 49% 49% 49% Hardness, Shore A 54 54 55 55 54 55 56 Specific Gravity 0.95 0.95 0.96 0.96 0.95 0.96 0.96 50% Modulus, PSI 258 256 256 265 266 271 257 100% Modulus, PSI 353 355 357 362 373 379 367 Tensile strength, PSI 637 615 637 669 651 674 642 Elongation, % 319 315 319 333 313 319 315 Tear Strength, PLI 146 136 133 142 137 138 141 reSound OM 5510-45N Room Temperature 70C Bio-derived Content (%) 40% 40% 40% 40% 40% 40% 40% Hardness, Shore A 45 46 47 46 46 45 45 Specific Gravity 0.88 0.89 0.89 0.89 0.89 0.89 0.90 50% Modulus, PSI 153 158 154 162 137 136 133 100% Modulus, PSI 251 259 259 261 226 222 218 Tensile Strength, PSI 438 481 451 495 417 470 486 Elongation, % 215 240 211 243 204 227 238 Tear Strength, PLI 84 81 87 82 83 85 84 AGING – PROPERTY RETENTION • Tested at room temperature and 70° C for comparison • Hardness, tensile strength elongation and modulus showed great retention Overmolding onto PP Overmolding onto ABS RHEOLOGY Suitable for injection molding and overmolding 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5510-30N reSound OM 5510-45N reSound OM 5510-60N reSound OM 5510-70N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s 1.0 10 100 1000 10000 100000 10.0 100.0 1000.0 reSound OM 5520-55N Shear Rate, 1/s Ca pi lla ry V is co si ty , P a* s Capillary viscosity at 200°C Capillary viscosity at 200°C reSound OM 5510 for PP reSound OM 5520 for ABS www.avient.com Copyright © 2020, Avient Corporation.

TECHNICAL BULLETIN VERSAFLEX™ PF Tack Layer for Surface Protective Films Properties Versaflex PF MD6727 Versaflex PF MD6741 Versaflex PF MD6649 Versaflex PF 9512 Versaflex PF MD6666 Versaflex PF MD6748 Versaflex PF MD6700 Features Low Tack Low Tack; Used for tailoring tack with MD6700 Low-Medium Tack Value Offering Medium Tack Low Gel/Residuals Low Tack Build High Tack Peel Strength Low Low-Medium Medium Medium-High Medium-High High High Applications Optical Films Home Appliances Plastics Construction/Bare Metals Finished Metals Steel/Painted Metals Bare Metals MFR @ 190°C/2.16 kg -- 4.5 17 5.4 21 4.8 6.5 MFR @ 230°C/2.16 kg 10 20 -- -- -- -- -- Specific Gravity, g/cc 0.92 0.91 0.92 0.92 0.94 0.94 0.94 Hardness, Shore A 50 49 37 38 37 31 30 G' @ 23°C, Pa 28.0 x 105 10.4 x 106 8.3 x 105 -- 9.9 x 105 11.8 x 105 10.0 x 105 DMA Tg, °C -29 -30 -9 10 11 15 21 LDPE/Versaflex PF Film1 180° Peel, N/25mm Stainless Steel after 20 min @ 25°C 0.5 2.2 3.2 6.1 6.7 8.5 8.6 after 7 days @ 25°C 0.6 2.7 4.3 5.5 8.2 8.3 10.3 PMMA2 after 20 min @ 25°C 1.1 1.7 3.8 4.9 6.9 8.3 8.8 after 20 min @ 75°C 2.8 4.1 5.1 6.9 9.0 10.7 11.8 after 7 days @ 75°C 4.0 4.4 5.9 9.8 8.4 9.8 10.3 Polycarbonate3 after 20 min @ 25°C 1.4 2.2 3.8 6.8 6.3 8.4 7.0 after 20 min @ 75°C 3.4 4.8 6.7 8.8 8.8 10.0 11.8 after 7 days @ 75°C 4.6 6.5 7.5 10.6 11.6 10.6 13.8 1 Film thickness: 51 micron LDPE/25 micron Versaflex PF 2 Arkema Plexiglas™ V052-100 (Plexiglas is a trademark of Arkema France Corp.) 3 Sabic Lexan™ L52-111 (Lexan is a trademark of Sabic Innovative Plastics) PHYSICAL PROPERTIES OF SELECTED VERSAFLEX PF TACK LAYER FORMULATIONS PRODUCT DESCRIPTION Versaflex™ PF formulations are specially developed for the manufacture of co-extruded surface protective films that apply easily, maintain tack with minimal build, peel smoothly and remove completely with little-to-no residue or ghosting. TAILORING TACK BY BLENDING VERSAFLEX PF Film Thickness: 39 micron LDPE/13 micron Versaflex PF F = Final tack after 7 days @ 25° C i = Initial tack after 20 mins @ 25° C Pe S tr en gt h on S te , N /2 5m m Pe S tr en gt h on S te , N /2 5m m PEEL STRENGTH ON STAINLESS STEEL Film Thickness: 51 micron LDPE/25 micron Versaflex PF www.avient.com Copyright © 2020, Avient Corporation.

Ltd Business Registration Number: 91320505799067336K Registered I Operation Address: 13 Plant, No.855, Zhujiang Road, Suzhou New District, Jiangsu Province, China by reason of its Quality Management System has been awarded this certificate for compliance with the standard ISO 9001:2015 The Quality Management System Applies in the following area: Production Activities of Plastic Colorant & Additive (UV Blockers, Anti-Oxidation, Anti-Aging) Certified since: January 8, 2009 Valid from: January 16, 2024 Valid until: January 4, 2027 the expiry date of last certification cycle: January 4, 2024 the date of recertification audit: December 21, 2023 to December 22, 2023 After a surveillance cycle, the certificate is valid only when used together with an Acceptance Notice of Surveillance Audit issued by CQC.

Ltd Business Registration Number: 91320505799067336K Registered/ Operation Address: 13 Plant, No.855, Zhujiang Road, Suzhou New District, Jiangsu Province, China by reason of its Environmental Management System has been awarded this certificate for compliance with the standard ISO 14001:2015 The Environmental Management System Applies in the following area: Production and Related Management Activities of Plastic Colorant & Additive (UV Blockers, Anti-Aging,Anti-Oxidation) Certified since: June 6, 2012 Valid from: January 17, 2024 Valid until: January 7, 2027 the expiry date of last certification cycle: January 7, 2024 the date ofrecertification audit: December 21, 2023 to December 22, 2023 After a surveillance cycle, the certificate is valid only when used together with an Acceptance Notice of Surveillance Audit issued by CQC.

Offers a high level of stiffness and heat resistance as well as excellent impact resistance Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene Maxxam™ Glass Fiber Reinforced Copolymer 71.866.POLYONE www.polyone.com Product Code - - - PP5312 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 Break % ASTM D638 20 15 20 10 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability. Provides heat stabilization • Excellent balance of properties • Natural, black or custom colors Product Code - - - PX5430 B1 PX5435 B1 PX5440 B1 PX5450 B1 Reinforcement Type - - - Glass Glass Glass Glass Reinforcement % - % - 30 35 40 50 Specific Gravity 73°F (23°C) - ISO 1183 1.13 1.18 1.23 1.35 Tensile Strength Yield MPa ISO 527 102 105 113 130 Flexural Modulus 73°F (23°C) MPa ISO 178 6500 8000 9400 11,500 Notched Izod Impact 73°F (23°C) kJ/m2 ISO 180 9.4 9.3 11.0 12.0 Heat Deflection 264 psi °C ISO 75 152 152 153 154 Product Code - - - PP5120 B270-LO MFR g/10 min ISO 1133 12 Tensile Modulus MPa ISO 527 3320 Tensile Stress Yield MPa ISO 527 32 Tensile Elongation Yield % ISO 527 4.6 Tensile Elongation Break % ISO 527 17 Flexural Modulus MPa ISO 178 3000 Charpy Impact 73°F (23°C) kJ/m2 ISO 179/1eU 38 Heat Aging 150°C h VW 44045 700 hr VOC µg/g VDA 278 23.5 Fog µg/g VDA 278 30.5 Carbon Emissions µgC/g VDA 277 18 Odor Grade VDA 270 B3 3 10 Maxxam™ Filled & Reinforced A range of melt flows to process well in sheet extrusion, thermoforming, profile extrusion and blow molding operations Product Code - - - PE4125 Reinforcement - - - Talc Reinforcement - % - 25 Specific 73°F (23°C) - ASTM D792 1.15 Tensile Yield psi ASTM D638 4050 MPa ISO 527 28 Tensile Yield % ASTM D638 10 Break % ASTM D638 40 Flexural 73°F (23°C) psi ASTM D790 270,000 MPa ISO 178 1850 Notched 73°F (23°C) ft-lb/in ASTM D256 3.5 kJ/m2 ISO 180 20.0 Heat 66 psi °F ASTM D648 190 °C ISO 75 88 264 psi °F ASTM D648 115 °C ISO 75 46 12 www.polyone.com Copyright © 2019, PolyOne Corporation.

Director since: 2015 Age: 66 • Young Innovations, Inc. Beggs – 75%; Mr. Rathbun –75%; and Mr.

Shot size should be 25% - 75% of barrel capacity Organic pigments used to produce yellow, red, blue and green colors are more likely to burnout or lighten after prolonged residence time or high regrind utilization.

Shot size should be 25% - 75% of barrel capacity Organic pigments used to produce yellow, red, blue and green colors are more likely to burnout or lighten after prolonged residence time or high regrind utilization.

X HC 93293#SR-03215-008 HP2CP 75:25 Blue X HC 93293#SR-03215-002 25:75 CP:HP Blue X HC 93293#SR-03215-003 75:25 CP:HP Blue

who has decided to retire later this year after an exceptional career, including the last seven as Chief Financial Officer at after earning her Bachelor's and Master's degrees in Accounting from the Brad enters retirement after a remarkable professional career where he served as a successful CFO for multiple publicly traded companies and lived on three continents," said