ABS BLUE HC CMPD ABS SLATE -01 DANONE F-WHITE PE

PE RED PRE-COLOR CHROMA BLUE ABS CHROMA RED ABS

202B BLACK - ABS PE NAVY BLUE 288C PG 244426.00 PEARL PK ABS

PE PURPLE/GRAY 2360C ORANGE ABS TALC V2 RACER BLUE 4ME AB TPU V2

PE MULTI-PURGE GREEN ABS 2 WHITE ABS 2

ABS BLUEBIRD 2727C CONC ABS EVERGREEN 2426C CONC PE GUANA 3258C

ABS ARMY WHITE WHITE SPECKLE PE UV 134210 ABS WHITE V2

Lysol® is a trademark of Reckitt Benckiser LLC; Formula 409® is a trademark of The Clorox Company; Clorox® is a trademark of The Clorox Company. 5© 2021 Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 For the materials tested, a variety of flame-retardant (FR) polycarbonate (PC) alloys, including blends with acrylonitrile-butadiene-styrene (ABS), polyethylene terephthalate (PET), and polybutylene terephthalate (PBT), were benchmarked against FR copolyester and the chemically resistant (CR) aliphatic polyketone (PK) blends of the Trilliant HC8900 and Edgetek ET8900 series. It can be seen that the PC/ABS and PC/PET samples failed to survive the disinfectant exposure and produce a testable sample. With regards to PC alloys, the general trend of increasing chemical resistance was observed in order of PC/ABS < PC/PET < PC/PBT, which was expected based on previous research and the marketing literature of PC blend manufacturers.4 However, the Edgetek ET8900 series clearly demonstrated the best ESCR performance against the household cleaners.

OnColor™ UL 94 Colorants* • More than 2,000 recognized concentrates available worldwide in all color options • HB rating for most of PP, PS, ABS, PC/ABS, PBT, PA, PA-GF, TPU generic resins • V-0, V-1, V-2 and 5VA/5VB ratings for more than 200 specific engineering resins • Master file of recognized concentrates with scope of use accessible in the UL product finder • Development of custom products for specific resins upon request • Compliance Letters available for REACH and RoHS Cesa™ Flame Retardant Additives for Glow Wire • Fire performance in line with different levels of Glow Wire temperatures (IEC 60695-2-12) • Let-Down Ratio adjustable to reach different levels of Glow Wire temperatures • Non-halogen (in accordance with IEC 61249- 2-21) and non-HBCD** solutions • Wide range of solutions adapted to different polymers (PP, PS, PC) • Color and flame retardants can be combined in one product • Compliance Letters available for REACH and RoHS APPLICATION BULLETIN * Solutions also sold as Renol™ UL 94 Colorants APPLICATION POLYMER GWFI TEMPERATURE TYPICAL LET-DOWN RATIO CONTENT HIPS 750–960°C 5–10% Non-HBCD flame retardant** PC 850–960°C 2–4% Non-halogen in accordance with IEC 61249-2-21 PP homopolymer 850–960°C 4% Non-halogen in accordance with IEC 61249-2-21 PP copolymer 850–960°C 4–8% Antioxidant - metal deactivator ** Non-HBCD means that Hexabromocyclododecane (HBCD) is neither used as starting material during the mixing phase of our products nor intentionally added during production, but it cannot be excluded that it is not present at level of ubiquitous traces in any of the raw materials used in manufacturing of our products.

TECHNICAL BULLETIN 1.844.4AVIENT www.avient.com PROPERTY TEST METHOD UNITS VERSAFLEX™ CE 3130-80N VERSAFLEX™ CE 3130-70N Shore Hardness ASTM D2240 Shore A 79 69 Specific Gravity ASTM D792 g/cm3 1.08 1.04 Tensile Strength ASTM D412 psi 2,484 2,222 Melting Flow Index (190°C, 21.6kg) ASTM D1238 g/10min 5.2 4.4 Elongation ASTM D412 % 864 667 Flexural Modulus @ 300% ASTM D790 psi 975 855 Viscosity @ 11,170 sec, 200°C ASTM D3835 Pa.s 30.6 22.2 Abrasion (Mass Lost) ASTM D3389 mg 1.1 2.6 UV Resistance 0.68W/m2 45°C 168hours — Good Good Stain Resistance *Condition 1 *Condition 2 — Excellent Excellent Blooming 85% RH 30°C,168 hours — Non Non Processing (Demold) — — Excellent Good Cycle Time — — Short Middle Overmold Substrate — — PC/ABS PC/ABS KEY PROPERTIES AND OVERMOLD PERFORMANCE Copyright © 2021, Avient Corporation.