This webinar will focus on the design, manufacturing, and testing of composite sandwich panels as well as data, predictive tools, and general recommendations for stakeholders working with or transitioning to composite sandwich panels across various industries and applications.

This webinar will focus on the design, manufacturing, and testing of composite sandwich panels as well as data, predictive tools, and general recommendations for stakeholders working with or transitioning to composite sandwich panels across various industries and applications.

Small quantities should be tested before large quantities are used. Full-round runners or a modified trapezoid runner are the best designs. Well depths approximately 1.5 times the diameter of the runner provide the best results.

Many premixed inks are sufficient—if you QC their levels with opacity cards—but the best way to control opacity levels is to create your inks using mixing systems designed for that purpose. The best chance of simulating this color module is with a translucent set of evenly opaque colors.

For best results manufacturers should understand the material’s processing benefits and limitations before designing a mold. The best way to solve this problem is to use air ejection, although a high draft may also be helpful.

For best results manufacturers should understand the material’s processing benefits and limitations before designing a mold. The best way to solve this problem is to use air ejection, although a high draft may also be helpful.

When you need consistency in processability or to meet your flame test performance requirements, we can help get you there. With on-time delivery as a standard and additional technical assistance when needed, Avient experts can provide support in selecting the best material for your application. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Avient answered the call to deliver much needed healthcare supplies, including facemasks, ventilators, test kits, and other PPE. The testing, refining, and testing again. This facility supports the creation and field testing of novel active ingredients in LLINS alone or in combinations.

TAB TESTING OF VARIOUS INSTALLATION METHODS BREAK PETG Skins with 1 in/25 mm 1.5 in/38 mm 2 in/51 mm 2400 lbs/1089 kg 2820 lbs/1279 kg 2748 lbs/1246 kg Hammerhead with 5 lb/ft3 (80 kg/m3) 665 lbs 302 kg Hammerhead with 7 lb/ft3 (115 kg/m3) 881 lbs 400 kg Hammerhead with 1084 lbs 492 kg 770 lbs 349 kg Glass/Epoxy with 1055 lbs 479 kg Glass/Polyester with Balsa Core 919 lbs 417 kg L-Bracket Installation BREAK PETG Skins with 2375 lbs 1077 kg 770 lbs 349 kg Glass/Polyester with Balsa Core 797 lbs 362 kg U-Channel Installation ITW Plexus MA420 adhesive was used in all tab testing installations except where noted. FASTENER TYPE BENEFITS CONSIDERATIONS FOAM HONEY COMB Through- bolting Best mechanical locking system Need back side access to panel ✓ ✓ Wide Grip (Bulb-Style) Rivet Highest pullout strengths Requires pilot hole ✓ Cup Washer Spreads compressive load Requires relief hole; for substructure and hard point attachment ✓ ✓ Wide Grip (Bulb-Style) Rivet Ease of use— no installation torque limitations For lower load attachments ✓ Sheet Metal or Wood Screw Readily available, low cost Penetrate both skins for improved pullout ✓ Shoulder Washer Limits compressive load Requires relief hole; for substructure and hard point attachment ✓ ✓ FASTENER SELECTION Copyright © 2023, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Trilliant™ HC high performance formulations were developed for specific healthcare enclosure needs, including: • Chemical resistance to common disinfectants • UL 94 ratings of 5VA at 3.0, V-0 at 1.5 mm & V-1 at 0.75 mm • Retained color aesthetics after chemical exposure • Ability to utilize existing PC/PET & COPE tooling Tested using an adaptation from ASTM D543 for environmental stress cracking resistance (ESCR), 15 bars of each material were placed into jigs at 1% and 2% strain. Virex® Tb Vesphene™ IIse CaviCide™ Trilliant™ HC 8910 +++ +++ +++ Trilliant™ HC 8920 (FR) – +++ +++ FR PC/PET – + ++ FR COPE (copolyester) + ++ +++ Tensile Strength Property Retention After 72-hour Continuous Exposure +++ Best (>90% retention), ++ Better (50-90% retention), + Good ( You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.