Base Resin PPA PC PSU PES PPS Co- polymer Acetal PEEK PA Barrel Temperatures* °F (°C) Rear Zone 550–580 (288–305) 550–590 (288–310) 600–640 (316–338) 630–660 (332–338) 550–580 (288–304) 350–370 (177–188) 660–700 (349–371) 440–490 (227–254) Center Zone 560–600 (293–316) 570–600 (300–316) 620–670 (327–354) 650–680 (343–360) 560–615 (293–324) 380–390 (193–200) 700–730 (371–388) 470–510 (243–266) Front Zone 580–620 (304–327) 580–630 (304–322) 630–680 (332–360) 670–730 (354–388) 590–630 (310–332) 390–430 (200–221) 720–750 (382–400) 490–540 (254–282) Nozzle 575–615 (302–324) 580–630 (304–322) 630–680 (332–360) 680–700 (360–371) 600–625 (316–330) 380–415 (193–213) 720–750 (382–400) 520–570 (271–300) Melt Temperature 575–615 (302–324) 580–625 (304–330) 625–675 (330–358) 650–710 (343–377) 600–625 (316–330) 370–410 (188–210) 670–740 (354–393) 520–570 (271–300) Mold Temperature 250–300 (121–150) 175–240 (80–116) 190–300 (88–150) 225–325 (107–164) 250–325 (121–164) 190–250 (88–121) 290–375 (143–190) 150–200 (66–93) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 1.0–3.0 Back Pressure psi 50 Screw Speed rpm 50–90 Drying Parameters °F (°C) 6 hrs @ 175 (80) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.5:1–3.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 of projected area of cavities and runner system * Barrel temperatures should be elevated for compounds designed for electrical insulative properties. Cut vent depths to: - PPA Compounds: 0.0015"–0.0025" depth and 0.250" width - PC Compounds: 0.002"–0.004" depth and 0.250" width - PSU Compounds: 0.003"–0.004" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PPS Compounds: 0.002"–0.003" depth and 0.250" width - Acetal Compounds: 0.0015" minimum depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" minimum depth and 0.250" width • Increase vent depth to 0.060" (1.5mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

PE GREY PANELS ABS WHITE FRAME CONC PE WHITE CAPTURE

MED BROWN WO/UV ABS HMF RED UV PE 3 HMF RED UV PE 5

ROJO GENÉRICO ABS DELTA GREEN PE PE GREEN POWDER

ABS WHITE SUB YELLOW PE SL ORANGE PE SL

Snow white and the seven speckles - discrete, white/off-white/pearlescent speckles for injection molded PE, PP, ABS, and SAN

FIBER MANUFACTURER T E X T I L E S & F A B R I C S • Provide a Product Carbon Footprint (PCF) calculation to align with ISO 14067:2018 and to help in meeting sustainability goals • Procure feedstock from renewable resources • Maintain comparative performance to conventional carbon black • Achieve color stability under xenon arc and TUV testing • Offer solutions for rPET, PP, PE, PBT, and PA6 where a desire for environmentally responsible products exists • Offered sustainable platform approach supported by extensive fiber expertise • Helped meet sustainability targets while attaining all design and engineering goals • Supplied necessary PCF calculation certified by TÜV Rheinland and aligning with ISO 14067 requirements • Provided effective alternative to virgin carbon black • Achieved reductions in CO2e emissions vs.

High-temperature polymers (HTP) processed include: LCP, PEEK, PAEK, PEKEKK, PEI, PES, PSU, PPSU, and PPS FLUOROPOLYMERS Colorant Chromatics has extensive experience in selecting the best pigments and additives for optimal performance under demanding circumstances. FP compounds for: PFA, FEP, ECA, ETFE, ECTFE, PTFE, and PVDF HTP compounds for: PEI, PES, PSU, PPSU, PPS, LCP, PEEK, PAEK, and PEKEKK Colorant Chromatics specialty compounds offer property enhancements such as: • Mechanical strength • Static dissipation • X-ray opacity • Electrical performance • Low dielectric performance • Mold release • Laser marking • Transcend™ Premier Healthcare Colorants (biocompatible) ADDITIVE CONCENTRATE FORMULATIONS Colorant Chromatics additive solutions can provide your solutions with additional functionality such as: • Improved lubricity • Lightweighting through foaming, by both physical and chemical foaming • Heat reduction through �SiteCool™ infra-red absorption technologies for roofing applications • Laser marking solutions or other added value properties NON-PFAS MOLD RELEASE ADDITIVES Colorant Chromatics™ Evoluscend™ is a non-PFAS* high-temperature polymer mold release additive developed to boost production efficiency and product quality for manufacturers. Evoluscend is effective across a range of high- temperature polymers, including PEEK, PPSU, PES, PSU, PEI, LCP, and PPS, with a maximum service temperature exceeding 150°C

KEY CHARACTERISTICS • Customized density offering a wide range of specific gravities (1.2–11 gm/cm3) • Based on recycled resin from PIR and PCR sources • Broad modulus range, from very flexible to very rigid grades • Corrosion resistance that withstands oxidization for long-term use and benefit • Chemical resistance can be adapted depending on base resin as required • Provides visual surface effects, aesthetics, and cool touch • Design flexibility and processing ease MARKETS AND APPLICATIONS Applications in packaging and consumer goods in which a more sustainable solution is preferred: • Cosmetic caps and closures • Perfume caps • Spirit bottle caps • Luxury boxes • Handles and knobs SUSTAINABILITY BENEFITS • Formulated with recycled resin from post-industrial recycled (PIR) and/or post-consumer recycled (PCR) sources including ocean bound plastic waste • Reduces waste and supports the circular economy • Reduces carbon footprint compared to fossil feedstock alternatives • Simplifies manufacturing and lowers costs versus metal PRODUCT BULLETIN CHARACTERISTICS UNITS Gravi-Tech REC-CI GT5200-5089 PT Natural Gravi-Tech REC GT5200-5075 Black X2 Gravi-Tech REC GT5200-5078 Gravi-Tech REC GT5200-5079 Gravi-Tech REC GT5200-5060 Gravi-Tech REC GT5200-5057 Base Resin Ocean Bound rPP rPP rPP rPP rPP rPP Recycled Content/Filler g/cm >98% PIR+PCR 60% PIR/Mineral >95% PIR/Mineral >95% PIR+PCR/Mineral 30% PIR/Mineral 30% PIR/Mineral Density (ISO 1183) g/ccm 1.2 1.2 1.2 1.2 1.9 2.0 CHARACTERISTICS UNITS Gravi-Tech REC GT7300-5034 X2 FD Natural Gravi-Tech REC GT7300-5036 Gravi-Tech REC GT7300-5025 Gravi-Tech REC GT6000-5032 GT6000-5031 Base Resin ABS rABS/ABS rABS rPA6 rPA6 Recycled Content/Filler g/cm 50% PIR/Mineral 65% PIR/Mineral 10% PIR/Mineral 20% PIR/Mineral 20% PIR/Mineral Density (ISO 1183) g/ccm 1.5 1.5 2.2 2.7 2.8 AVAILABLE GRADES Copyright © 2024, Avient Corporation.

When overmolded, GLS TPEs bond permanently and seamlessly to many different plastic substrates, including polypropylene (PP), polycarbonate (PC), acrylonitrile-butadiene- styrene (ABS), PC/ABS, copolyester, polyamide (nylon) and polystyrene (PS).