Common global Quality Management System (QMS) with external ISO13485 GMP certification of the 3 dedicated production units, and conducting annual internal and external audits.

Common global Quality Management System (QMS) with external ISO13485 GMP certification of the 3 dedicated production units, and conducting annual internal and external audits.

Avient is dedicated to conducting business ethically and with integrity, and our Position on Human Rights is part of our commitment to socially responsible business practices.

Avient Code of Conduct, which focuses on putting forth guidelines for ethical behavior;

Stat-Tech™ ST7400-8010 ESD Formulations improved electrical conductivity for fire alarm

Stat-Tech™ ST7400-8010 ESD Formulations improved electrical conductivity for fire alarm

The coarse ground material was then crystallized in a vacuum oven at 160°C before drying the material at 160°C for approx. 4 hours within a PET drier • Plaques were then molded on a BOY XS and 10 of these were kept after each cycle, to take color measurements • This process was then repeated until 5 heat cycles had been completed RESULTS FOR RECYCLABILITY METHOD-1 As plaques were produced while the material went through five different melt heat histories, plaques were produced at each cycle and L*, a*, and b* values were measured. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

Steel – Static 0.25 0.46 0.18 0.15 0.12 0.19 0.11 0.14 0.13 0.24 0.17 0.17 Impact Notched Izod Impact (23°C, 3.18 mm, Injection Molded) J/m ASTM D256A 41 64(6) 110 107 107 70 80 37 37 75 – 69 Thermal Properties Heat Deflection Temperature ASTM D648 0.45 MPa °C 215(6) – 250 215 216 184 152 151(6) 153(6) 218(6) – – 1.8 MPa °C 65(6) 239(7) 244(6) 210 210 75 94 81.1(6) 88 197(6) – 135(5) Electrical Properties Surface Resistivity ohms/sq ASTM D254 – – – 1.30x1012 1.9x1012 5.2x1012 – – – – – 1.0x109 Dielectric Strength (Short Time) kV/mm – – 8.5 – – – – – – – – – Flammability Flame Rating Class UL 94 HB – – HB HB HB – HB – – – – LubriOne™ Internally Lubricated Formulations NOTES (1) Type I, 5.1mm/min (2) Type I, 21.3 mm/min (3) Type I, 50 mm/min (4) Type I, 5.1mm/min, Break (5) 3.2 mm thick, Unannealed (6) 6.35 mm thick, Unannealed (7) 3.2 mm thick, Annealed PRODUCT DESCRIPTION UNITS TEST METHOD 5024 RS HI 5021 RS S1 5021 RS X2 5019 X1 LB6700- 5001 RS AF Black NN- 000/01M Black SO REC LB6600- 5030 RS Grey LB3300- 5010 RS LB3300- 5005 RS REC LB3220- 5001 RS C Natural X1 5010 GP Grey 5006 RS PE 5004 RS PE LB4200- 5022 Black LB4200- 5023 Base Polymer PA 6 PA6/PA66 PA66 PBT PC PKE POM Lubricant UHMWPE1 UHMWPE UHMWPE UHMWPE UHMWPE MoS22 Graphite UHMWPE UHMWPE UHMWPE Graphite UHMWPE UHMWPE MoS2 UHMWPE Filler type GF10 GF30 GF30 GF50 GF50 Unfilled GF33 GF20 MI20 GF10 Unfilled GF20 GF30 Unfilled Unfilled General Properties Specific Gravity g/cm3 ISO 1183 1.18 1.35 1.39 1.55 1.58 1.14 1.44 1.42 1.46 1.23 1.26 1.34 1.43 1.4 1.35 Mechanical Properties Tensile Modulus (23°C) MPa ISO 527-1 4250 9500 9000 15500 16600 3500 10600 6300 3330 4000 1630 5300 9250 2470 2150 Tensile Strength (Yield, 23°C) MPa ISO-527-2 97 150 160 205 200 85 164 102 55 60 60 108 99.1 55 50 Tensile Elongation (Break, 23°C) % ISO-527-2 12 2.5 3 2.7 2.4 3.4 2.0 4.2 8 2.5 46 3.7 1.5 11 11 Flexural Strength (23°C) MPa ISO 178 103 – – 285 265 108 215 127 78 85 38 155 117 73 68 Flexural Modulus (23°C) MPa ISO 178 3250 – – 12400 11100 2690 9000 4700 3000 3100 1380 4600 5450 2210 2070 Impact Charpy Notched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 14 12 10 15 10 3 6 7.7 4.3 12 15 10 7.6 8 5 Charpy Unnotched Impact Strength (23°C, Injection Molded) kJ/m^2 ISO 179 82 55 61 75 60 65 50 47 69 - NB 63 36 NB NB Thermal Properties Deflection Temperature Under Load 1.8 Mpa, Unannealed °C ISO 75-2/A 107 – – 204 – 73 235 – – – 90 210 204 86 80 Cofficient of Friction (CoF) & Wear Rate CoF vs. These properties, coupled with a wide array of base engineering thermoplastics, deliver the distinct benefits of LubriOne: • Reduced friction and heat buildup between interacting surfaces • Reduced noise and vibration among components in relative motion • Reduced weight and improved design freedom • Lower long–term maintenance costs when grease and other lubricants are eliminated Copyright © 2023, Avient Corporation. You have the responsibility to conduct full-scale end-product performance testing to determine suitability in your application, and you assume all risk and liability arising from your use of the information and/or use or handling of any product.

POPULAR BELT & HOSE REINFORCEMENT PRODUCTS Product ID Coating Base Fiber Nominal Break Strength Nominal Yield Geometry Diameter Notes K1000T FIBER-LINE® 43 LBs (19 KGs)  12987 FT/LB 8725 M/KG Round/Flat .374 mm Twisted Kevlar with heat-activated K2160T 100 LBs (45 KGs) 5847 FT/LB 3928 M/KG Round/Flat .558 mm Twisted Kevlar with heat-activated K1500 1x2x3 400 LBs (180 KGs) 1366 FT/LB 917 M/KG Round 1.22 mm Twisted Kevlar cord with heat-activated V1500 2x3 Vectran 550 LBS (250 KGs) 1373 FT/LB 921 M/KG Round 1.305 mm Twisted Vectran cord with heat-activated LOCATIONS Headquarters, R&D, Manufacturing FIBER-LINE® LLC 3050 Campus Drive Hatfield, PA 19440 +1 215.997.9181 fiber@fiber-line.com Manufacturing Operations FIBER-LINE® LLC 280 Performance Drive SE Hickory, NC 28602 +1 828.326.8700 fiber@fiber-line.com EMEA & Asia Pacific Operations FIBER-LINE® INTERNATIONAL B.V.

Thermal Stability: Excellent heat resistance from 340 - 380°C supports effective homogenization of the foaming agent with high-performance polymers