MP-73122PC WHITE PRE-COLOR PC MP-87137PC BLACK PRE-COLOR PP FR 8-6 LMS-1000

KEY CHARACTERISTICS • UL 94 V-2, V-0, 5VA ratings and elevated RTI ratings • GWFI (IEC 60695-11-10) up to 960°C • Comparative Tracking Index (CTI) PLC 0, 600V ratings • Injection molding and extrusion grades • Non-halogen grades available • Low dielectric performance with selected formulations • Good recyclability • Colorable MARKETS & APPLICATIONS Applications that require flame retardant performance including: • Transportation: Interior components, seat components, door panels, aircraft interiors, railway interiors, boat interiors • Construction & Building Materials: Cable insulation, pipes and fittings, insulation materials • Consumer – Appliance casings, housings, covers, fume hoods, battery packages, furniture • Industrial Equipment: Machine housings • Energy, Electrical & Electronic, E-Mobility: Battery frames, electrical housings, connectors • Telecommunication: Cable management • Packaging: Transportation of sensitive goods • Healthcare: Medical device housings and components PRODUCT BULLETIN MAXXAM FR FLAME RETARDANT POLYOLEFIN FORMULATIONS Non-halogenated Halogenated PP Homopolymer Copolymer Homopolymer Copolymer Unit Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Unfilled Glass Fiber Mineral Characteristic Talcum Talcum Talcum Talcum Reinforcement Mass-% 0 5–30 5–30 0 20–30 5-20 0 5–30 5–20 0 5–30 5–20 Colorable – ++ ++ + ++ ++ + + + + + + + Density g/cm3 0,9–1,08 1,28–1,37 0,98–1,55 0,92–1,06 1,25–1,35 0,95–1,28 0,94–1,04 1,3–1,55 1,01–1,42 0,96–1,01 0,94–1,58 0,95–1,46 Tensile Strength MPa 25–30 30–70 25–35 16–22 40–65 15–25 25-–35 30–70 25–35 20–24 20–55 -25 E-Modulus (Tensile) MPa 1600–2500 2500–8200 2500–4000 800–1200 2000–8000 1600–3000 1300–2000 3000–8900 1900–3500 1000–1400 1200–7500 1500–3000 Izod Impact 23°C notched % 2,0–4,5 3,5–7,5 2,5–4,5 5–40 2,5–18 2,5–6 2,5–4,5 3,5–6,0 3,0–7,0 4,0–40 2,5–16 2,5–10 Max.

Place vents at each 90° intersection and vent to atmosphere. 6. Increase nozzle tip diameter 6. Perform short shots to determine fill pattern and verify proper vent location 6.

Providing solutions that are considered recyclable within the colored bottle stream will thus be an integral part of the recyclability strategy for both convertors and brand owners. L* a* b* 1st Mould* 36.3 23.4 54.0 2nd Mould 39.3 24.3 53.0 3rd Mould 39.4 24.4 47.0 4th Mould 39.8 24.2 42.1 5th Mould 40.4 22.8 40.4 10.0 15.0 20.0 25.0 30.0 35.0 40.0 45.0 50.0 55.0 60.0 0 1 2 3 4 5 6 Melt Histories L* a* b* MELT HISTORIES For each melt history, a picture of the respective plaques was also taken and is reported in the figure below. It was also demonstrated that usage of a reduced amount of color, namely 0,045% of Fortis Amber-1, allows the production of bottles (Bottle C) that closely resembles the original bottles (Bottle A).

Topical optical brighteners have been used to improve the surface whiteness of plastic articles and synthetic fibers. OnColor™ Edgeglo™ Colorants Polymer Colorants

To satisfy required performance characteristics they can be filled and reinforced with glass fiber, minerals, impact modifiers, colorants and stabilizer systems. KEY CHARACTERISTICS Formulated with bio-based resin and/or 10–50% filler from renewable plant sources, Maxxam BIO formulations: • Reduce product carbon footprint • Achieve equivalent performance to standard polyolefin formulations • Provide good stiffness, durability, impact resistance and UV stability • Deliver good surface finish and are easy to color • Enable customized performance characteristics depending on application need • Offer food contact compliance MARKETS AND APPLICATIONS Maxxam BIO formulations are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation Interior Applications - Decorative profiles, trunk side liners, pillars, T-cup • Industrial - Structural parts, furniture • Consumer - Household goods, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with bio-based resin and/or 10–50% natural filler • Utilize natural filler from renewable plant sources including olive seed based powder and cellulose fiber • Offer a lower product carbon footprint compared to traditional petroleum-based feedstock • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam BIO MX5200-5036 Natural FD Maxxam BIO MX5200-5030 Natural FD Maxxam BIO MX5200-5030 Natural FD X1 Maxxam BIO MX5200-5001 RS HS Natural Maxxam BIO MX5200-5033 RS HS Natural Maxxam BIO MX5200-5034 RS HS Natural Maxxam BIO MX5200-5035 RS HS Natural Filler/Reinforcement Unfilled Unfilled Unfilled 30% Glass Fiber 10% Mineral 20% Mineral 30% Mineral Density (ISO 1183) g/cm 0.90 0.90 0.90 1.12 0.96 1.03 1.12 Tensile Modulus (ISO 527-1) @ 23°C MPa 1500 1000 1000 6400 1350 1650 2100 Tensile Stress (ISO 527-2) @ 23°C MPa 27.0 20.0 20.0 75.0 13.0 14.0 15.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 5 50 50 3.0 50 37 18 Charpy Notched (ISO 179) kJ/m 5 20 25 10 12 10 10 CHARACTERISTICS UNITS Maxxam BIO MX5200-5023 RS HS HI Natural 70 Maxxam BIO MX5200-5025 RS HS Natural 70 Maxxam BIO MX5200-5004 RS HS Natural 70 Maxxam BIO MX5200-5003 RS Natural 70 Maxxam BIO MX5200-5009 RS HS Natural 70 Maxxam BIO MX5200-5024 RS HS Natural 70 Maxxam BIO MX5200-5022 RS HS Natural 70 Filler/Reinforcement 15% Olive Seed Based 25% Olive Seed Based 30% Olive Seed Based/ 10% Mineral 35% Olive Seed Based/ 5% Mineral 15% Olive Seed Based/ 17% Glass Fiber/ Mineral 20% Olive Seed Based/ 20% Glass/ Mineral 10% Olive Seed Based/ 20% Mineral Density (ISO 1183) g/ccm 1.00 1.15 1.10 1.07 1.09 1.25 1.10 Tensile Modulus (ISO 527-1) @ 23°C MPa 1750 2000 2700 2500 3800 3500 4100 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 21.0 20.0 30.0 20.0 40.0 35.0 42.0 Tensile Strain at Break (ISO 527-2) @ 23°C % 24 5 3 5 3 4 2 Notched Izod (ISO 180) kJ/m 15 7 3 2 5 15 7 MAXXAM BIO POLYOLEFINS – BIO-BASED RESIN – TECHNICAL PERFORMANCE MAXXAM BIO POLYOLEFINS – OLIVE SEED BASED FILLER – TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam BIO MX5200-5029 NF HI UV Black X1 Maxxam BIO MX5200-5032 NFS UV Natural Maxxam BIO MX5200-5020 NF/NFS UV Natural X1 Maxxam BIO MX5200-5016 NF Natural Filler/Reinforcement 10% Cellulose Fiber 20% Cellulose Fiber 30% Cellulose Fiber 40% Cellulose Fiber Density (ISO 1183) g/ccm 0.95 1.00 1.02 1.07 Tensile Modulus ISO 527-1) @ 23°C MPa 1550 1750 2640 3600 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 33 30 48 55 Tensile Strain at Break (ISO 527-2) @ 23°C % 8 12 9 4 Charpy Notched Impact Strength (ISO 179/1eA) kJ/m2 5 6 5 5 Charpy Unnotched Impact Strength (ISO 179/1eU) kJ/m2 33 49 38 30 MAXXAM BIO POLYOLEFINS – CELLULOSE FIBER FILLER – TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

BU TPU COLOR CONCENTRATE HH BK TPU COLOR CONCENTRATE HH PP FR 8-6 LMS-1000

Cross-linked products only: Dry Silane cannot be dried, has a 6 month shelf life when stored unopened in a cool dry location and must be used within a few days after opening. EXTRUDER Screw 3/4" to 6" Polyethylene type—Single flight, no mixing section, 1.5–2:1 compression ratio Tooling Semi-Pressure type: 30°–40° angle Die On size with 1/8" or less land L/D 24:1 recommended Screen Pack No screen pack (Optional depending on pressure) Cooling Trough 120–150°F (50–65°C) recommended Feeder Gravimetric type preferred—3 compartment for cross-linked Dryer Desiccant type, 4 hours at 160°F (70°C) For ECCOH™ compound only; never put Dry Silane in Dryers PROCESSING Temperature ECCOH 5000 Series ECCOH 6000 Series Wire Preheat 180–250°F (80–120°C) 180–250°F (80–120°C) Feed Zones 200°F (93°C) 275°F (135°C) Transition 275°F (135°C) 325°F (163°C) Metering 300°F (150°C) 375°F (190°C) Head/Die 330°F (165°C) 420°F (215°C) Target Melt 330–340°F (165–170°C) 420–440°F (215–225°C) Flame at Die Tip Yes—as needed Line Speed Shear sensitive: Observe Melt Temperature, Motor Amperage, and Pressure Purge Compound HDPE Copyright © 2020, Avient Corporation.

Nikrant Page 67 United States 36% Europe 36% Canada 2% Asia 20% Latin America 2011 Revenue: $0.6 Billion2011 Revenue: $0.6 Billion SolutionsSolutions At a Glance Global Specialty Engineered Materials Appliance 6% Building & Construction 3% Wire & Cable 14% Electrical & Electronics 14%Consumer 21% Packaging 5% Industrial 8% Misc. 3% HealthCare 5% Transportation 21% America 6% 2011 Revenue by Industry Segment2011 Revenue by Industry Segment 1.1% 1.3% 3.4% 5.1% 9.6% 8.0% 12-16% 2006 2007 2008 2009 2010 2011 2015 Operating Income % of Sales Target Expanding ProfitsExpanding Profits Page 68 Value Proposition • GSEM is a global leader providing complete specialty solutions encompassing innovative technologies and services to enable customer success Transformation Highlights • Dramatic turnaround of the Engineered Materials business through mix improvement and specialty focus Value Proposition and Transformation Highlights Global Specialty Engineered Materials improvement and specialty focus • GLS acquisition successfully integrated, having more than doubled earnings in 3 years • PolyOne culture and strategy now engrained worldwide • Expansion into healthcare with dedicated resources > $15B Addressable Market Page 69 • Polymer design, formulation and service expertise • Broad, global technology base and regional centers of excellence • Ten innovation centers around the world Key Differentiators Global Specialty Engineered Materials • Ten innovation centers around the world • Specialty brand leadership with PolyOne, GLS, NEU and ECCOH • Ability to leverage global key account team Page 70 From Volume Commodity-driven product portfolio To Value Specialty technology and solutions EM North America Transformation Volume Sales Gross Margin $ Mix Transformation – Executing the Strategy Global Specialty Engineered Materials 2006 2011 2006 2011 2006 2011 Page 71 $12 $29 Operating Income ($ in millions) • Provided access to new customers in specialized, high-growth markets such as healthcare and consumer • Strategic partner to many of the world’s best-known companies GLS Integration Success 16.9% 8.2% 2007 2011 2007 2011 Working Capital % of Sales • Complementary global footprint provided additional cross-selling opportunities • Opportunity to expand margins and drive working capital improvement while remaining customer-focused Page 72 $1.3 $27.6 2006 2011 Healthcare Revenue • Investment in dedicated healthcare team to drive penetration and growth • Leverage product portfolio globally & win specialty business Areas of Focus Global Specialty Engineered Materials $10.5 $117.9 2006 2011 Consumer Revenue 2006 2011globally & win specialty business in targeted markets • Aggressively commercialize specialty innovation platforms • Utilize our innovation centers to influence OEM design (Revenue in $ millions) Page 73 • Carbon Nanotube Formulations � Applications: Semiconductor equipment, hard drives � Customer benefits: Scrap cost reduction and clean conductivity • Thermally Conductive Solutions Applications: Sockets and bulb holders for LED lighting Key Innovations Global Specialty Engineered Materials � Applications: Sockets and bulb holders for LED lighting � Customer benefits: Cost reduction, energy saving, and design flexibility • FDA-Regulated TPEs � Applications: Food packaging seals, intravenous delivery systems, medical stoppers, prefilled syringes � Customer benefits: Clean and safe elastomers for highly regulated applications Page 74 Critical Imperatives and 2015 Goal Global Specialty Engineered Materials Critical Imperatives • Commercialize critical new technology platforms • Manage the mix as we continue to drive the transformation • Global translation of commercial successes 2015 Goal • 12 - 16% return on sales Page 75 Page 76

Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 1 von 2 HRB 731450 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 1 a) PolyOne S.à r.l., Germany Branch b) Gaggenau Geschäftsanschrift: Adolf-Dambach-Straße 2, 76571 Gaggenau Zweigniederlassung der "PolyOne S.à r.l." mit Sitz in Pommerloch / Luxemburg (Registre de commerce et des sociétés B226205) c) Den Vertrieb und den Großhandel von Fertigerzeugnissen, die unter anderem aus ein- und mehrschichtigen thermoplastischen Platten, Polymermischungen und Farbkonzentraten sowie klaren thermogeformten Kunststoffbehältern bestehen, wobei die Tätigkeiten für die das Gesetz besondere Qualifikationen oder Erlaubnisse vorschreibt, die von der Zweigniederlassung nicht erfüllt oder gehalten werden, ausdrücklich ausgeschlossen sind. 12.000,00 EUR a) Jeder Geschäftsführer vertritt einzeln. a) 10.09.2018 Kretzler 2 b) Bestellt als Geschäftsführer: Fielding, Gary J., Chesire / Vereinigtes Königreich, *20.09.1963 Bestellt als Geschäftsführer: Potoczny, Zaneta Gabriela, Mersch / Luxemburg, *17.10.1974 Ausgeschieden als Geschäftsführer: Machin, Geneviéve Elizabeth, Luxemburg / Luxemburg, *31.03.1972 a) 17.03.2020 Knauf Abruf vom 27.12.2021 17:13 Handelsregister B des Amtsgerichts Mannheim Nummer der Firma: Seite 2 von 2 HRB 731450 Nummer der Eintragung a) Firma b) Sitz, Niederlassung, inländische Geschäftsanschrift, empfangsberechtigte Person, Zweigniederlassungen c) Gegenstand des Unternehmens Grund- oder Stammkapital a) Allgemeine Vertretungsregelung b) Vorstand, Leitungsorgan, geschäftsführende Direktoren, persönlich haftende Gesellschafter, Geschäftsführer, Vertretungsberechtigte und besondere Vertretungsbefugnis Prokura a) Rechtsform, Beginn, Satzung oder Gesellschaftsvertrag b) Sonstige Rechtsverhältnisse a) Tag der Eintragung b) Bemerkungen 1 2 3 4 5 6 7 3 a) Firma geändert; nun: Avient S.à r.l., Germany Branch b) Daten der Hauptniederlassung geändert; nun: Zweigniederlassung der "Avient S.à r.l." mit Sitz in Pommerloch / Luxemburg (Registre de commerce et des sociétés B226205) b) Ausgeschieden als Geschäftsführer: Fielding, Gary J., Chesire / Vereinigtes Königreich, *20.09.1963 Bestellt als Geschäftsführer: Merklein, Norbert, Kronberg im Taunus, *03.05.1964 a) Der geänderte Gesellschaftsvertrag der Hauptniederlassung wurde zum Handelsregister eingereicht.