AFNOR M 2 in France, DIN 4102 B 2 – B 1 in Germany, UNI 8457 – 9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3-5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C MELT & MOLD TEMPERATURES ENGLISH (°F) METRIC (°C) COMMENTS Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run. DRYING CONDITIONS ENGLISH (°F) METRIC (°C) Temperature 180°F 80°C Duration 2–4 Hours Moisture Level Allowable 0.05%–0.20% PROCESSING Screw Speed Typical screw speeds are recommended Injection Velocity 1–3 inch per second Back Pressure Lower back pressure is recommended Pack Pressure 60–80% of max injection pressure Hold Pressure 40–60% of max injection pressure Cool Time 10–30 seconds (depends on part geometry and dimensional stability) Residence Time Longer residence times are not advised 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

PDI) on extruded profiles 2 ASTM D-638 3 ASTM 256 4 ASTM D-648 66 psi, unannealed, 0.125" 5 Savings depends on profile size and production volume Acrylite is a registered trademark of Evonik Performance Materials Lens Performance Resilience™ LS Frost PVC Acrylite® Satinice Frost PMMA Light Transmission1 at 0.060" (1.5mm) 83% Low Diffusion 78% Medium Diffusion 75% High Diffusion 81% Low Diffusion Diffusion Half Power Angle (DLD) 26° Low Diffusion 41° Medium Diffusion 58° High Diffusion 26° Low Diffusion Tensile Strength2 Tensile Modulus2 Tensile Elongation (break)2 7,360 psi 400,000 psi 20% 7,330 psi 330,000 psi 43% Flammability (UL 94) V-0 @ 1.5mm 5VA @ 2.0mm HB @ 1.6mm Notched Izod Impact (73°F)3 2.3 ft-lb/in 0.6 ft-lb/in Heat Deflection Temperature4 157°F/69°C 182°F/83°C UV Stability Good Excellent Chemical Resistance Excellent Good Typical Lens Profile Cost 10–15% Savings5 Baseline 1.866.POLYONE www.polyone.com Copyright © 2018, PolyOne Corporation.

In addition, its customers have an obligation to comply with Federal Energy Regulatory Commission (FERC)2 physical security requirements. Using GlasArmor panels, Ballisti-Wall® and Ballisti- Cover® solutions enable utility companies to add a superior level of protection to critical components and meet FERC security requirements within a modular, adaptable construction. 1 https://www.nbcnews.com/news/us-news/three-substations- attacked-washington-state-rcna63214 2 https://www.ferc.gov/sites/default/files/2020-04/E-4_10.pdf © 2023, All Rights Reserved Avient Corporation, 33587 Walker Road, Avon Lake, Ohio USA 44012 To learn more about Avient’s advanced composite solutions, visit www.avient.com/composites.

Density Impact Flexural Tensile HDT Equilibrium Moisture — PKE-GF PA12-GF PA612-GF 5 4 3 2 1 0 Impact Shrink Modulus Chemical Resistance Flexural (Cond.) CO2 Emission Factor — PKE-GF — PA6-GF — PA66-GF HDT Wear Density 5 4 3 2 1 0 Equilibrium Moisture 1: Poor 3: Good 5: Excellent

Zone 2 - Center 420°F 460°F 215°C 235°C Zone 3 - Front 430°F 470°F 220°C 240°C Nozzle 440°F 480°F 225°C 250°C Melt & Mold Temperatures English (°F) Metric (°C) Comments Melt Temperature 440°F 480°F 225°C 250°C Wipe down mold surface after each production run.Mold Temperature 125°F 200°F 50°C 90°C Notes These guidelines are based on lab results, and their values may not reflect actual processes using different machinery. Drying Conditions English (°F) Metric (°C) Temperature 180°F 80°C Duration 2-4 Hours Moisture Level Allowable 0.05%–0.20% Processing Screw Speed Typical screw speeds are recommended Back Pressure Lower back pressure is recommended Pack Pressure 60 - 80% of max injection pressure Hold Pressure 40 - 60% of max injection pressure Cool Time 10 - 30 seconds (depends on part geometry and dimensional stability) www.avient.com Copyright © 2020, Avient Corporation.

AFNOR M 2 in France, DIN 4102 B 2–B 1 in Germany, UNI 8457–9174 C 1 in Italy, BKZ 5.2 in Switzerland, BS 5852.1990 CRIB 3–5 in UK)** • Standard portfolio available for PP injection molded applications APPLICATION BULLETIN * Laboratory weathering testing may not be determinative of all conditions of use; the end user must determine suitability of a product for its intended use ** Contact us for more information on regulatory compliance Copyright © 2022, Avient Corporation.

And, because TPEs can be overmolded, brand owners and packaging manufacturers have new options for designing components that can be integrated directly into the package. 4345, 4355, 4365 4465 4570 4665 Hardness Shore A 45A, 55A, 65A 65A 70A 65A Regulatory* • EU 10/2011 Color Translucent Translucent Natural Natural Overmolding Bonds To Polypropylene Polypropylene Polar substrates Polar substrates Chemical Resistance • #1 for soaps • Low-cost solution for non-polar oils • #2 for soaps • Some oils • #1 for polar & non-polar oils • #1 for non-polar solvents, like isododecane • #2 for non-polar oils • Abrasion resistance * Regulatory compliance is offered for consideration only—limitations apply; please check with product stewardship.

All products passed the OEKO-TEX® 100-2 standard, do not include plasticizers, and contain lower VOCs than traditional adhesive solutions. KEY CHARACTERISTICS • High-wearing comfort and elastic recovery • Strong and seamless adhesion to polyester and nylon fabrics • Passed OEKO-TEX 100-2 testing • Excellent washability at up to 60°C • Non-toxic formulations with low volatile organic compounds (VOC) and without added plasticizers • Attractive alternative to conventional TPU adhesive film and glue MARKETS & APPLICATIONS Versaflex TF Adhesive TPE solutions have been custom engineered for: • Elastic strips in underwear • Seam tapes in sports and fitness apparel PRODUCT BULLETIN 1.844.4AVIENT www.avient.com Copyright © 2024, Avient Corporation.

Dispute Reason Avient's reason for disputing the invoice 2 Column Description Actions Click on the Edit ( ) or Delete ( ) icon to edit or delete an invoice. Go to the Orders page or, on the Invoices page, click the Create Invoice from PO button above the table to go to the Orders page 2. Click on the Create Credit Note button above the Invoices table on the Invoices page or, on the Orders page, click on the Create Credit Note ( ) icon in the Actions column of the Purchase Orders table. 2.