Offers high levels of stiffness and heat deflection performance. 51.866.POLYONE www.polyone.com Product Code - - - PP5210 A111 PP5220F A1 PP5230F PP5240 A111 Filler Percentage - % - 10 20 30 40 Tensile Strength Yield psi ASTM D638 4600 4300 3900 3500 MPa ISO 527 32 30 27 24 Tensile Elongation Yield % ASTM D638 7.0 6.0 5.5 5.0 Break % ASTM D638 125 115 100 70 Flexural Modulus 73°F (23°C) psi ASTM D790 250,000 285,000 310,000 340,000 MPa ISO 180 1600 1900 2100 2300 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 0.70 0.70 0.70 0.70 kJ/m2 ISO 180 3.85 3.85 3.85 3.85 Heat Deflection 66 psi °F ASTM D648 190 210 225 240 °C ISO 75 88 99 107 116 264 psi °F ASTM D648 120 125 130 133 °C ISO 75 49 52 54 56 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.04 1.15 1.25 Linear Shrinkage 1/8 in wall % - 1.3–1.7 1.1–1.5 0.9–1.3 0.7–1.1 3.2 mm wall % - 1.3–1.7 1.1–1.5 0.9–1.3 0.7–1.1 Product Code - - - PP6210 A11 PP7220 A614 PP6230F A1 PP6240 A44 Filler Percentage - % - 10 20 30 40 Tensile Strength Yield psi ASTM D638 3200 3400 2800 2550 MPa ISO 527 22 24 19 18 Tensile Elongation Yield % ASTM D638 14.0 10.0 8.0 7.0 Break % ASTM D638 >400 >400 >400 200 Flexural Modulus 73°F (23°C) psi ASTM D790 160,000 185,000 250,000 225,000 MPa ISO 178 1100 1300 1750 1550 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 >10.0 >10.0 8 8.0 kJ/m2 ISO 180 55.0 55.0 44.0 14.0 Heat Deflection 66 psi °F ASTM D648 160 170 198 200 °C ISO 75 71 77 92 93 264 psi °F ASTM D648 100 105 108 112 °C ISO 75 38 41 42 44 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.04 1.15 1.25 Linear Shrinkage 1/8 in wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 3.2 mm wall % - 1.2–1.6 1.0–1.4 0.8–1.2 0.6–1.0 Maxxam™ Calcium Carbonate Filled Homopolymer Maxxam™ Calcium Carbonate Filled Copolymer Polypropylene Offers improved stiffness over unfilled materials as well as substantial improvement in drop weight impact and notched izod impact. Offers a high level of stiffness and heat resistance as well as excellent impact resistance Product Code - - - PP5410 B1 PP5420 B1 PP5430 B5 PP5440 B1 Reinforcement % - - - 10 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.96 1.05 1.14 1.23 Tensile Strength Yield psi ASTM D638 8000 10000 11500 13000 MPa ISO 527 55 69 79 90 Tensile Elongation Break % ASTM D638 8 2 2 2 Flexural Modulus 73°F (23°C) psi ASTM D790 525,000 795,000 850,000 1,000,000 MPa ISO 178 3600 5450 5800 7550 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 1.10 1.30 1.50 1.60 kJ/m2 ISO 180 6.00 7.25 8.25 8.50 Heat Deflection 66 psi °F ASTM D648 280 305 310 315 °C ISO 75 138 152 154 157 264 psi °F ASTM D648 250 280 290 300 °C ISO 75 121 138 143 149 Linear Shrinkage 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Product Code - - - PP7410 A241 PP7420 B77 PP6430 A206-UV PP6435 Reinforcement % - - - 10 20 30 35 Specific Gravity Yield - ASTM D792 0.98 1.05 1.14 1.17 Tensile Strength Yield psi ASTM D638 5300 9200 9000 13300 MPa ISO 527 37 64 62 92 Tensile Elongation Break % ASTM D638 8 4 4 4 Flexural Modulus 73°F (23°C) psi ASTM D790 240,000 420,000 695,000 810,000 MPa ISO 178 1650 2900 4800 5600 Notched Izod Impact 73°F (23°C) ft-lb/in ASTM D256 5.0 1.60 1.60 2.50 kJ/m2 ISO 180 27.5 9.00 9.00 14.00 Heat Deflection 66 psi °F ASTM D648 298 313 297 300 °C ISO 75 144 156 152 149 264 psi °F ASTM D648 210 272 265 288 °C ISO 75 92 133 128 142 Linear Shrinkage 1/8 in wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 3.2 mm wall % - 0.4–0.7 0.3–0.6 0.3–0.6 0.2–0.5 Maxxam™ Glass Fiber Reinforced Homopolymer Polypropylene Maxxam™ Glass Fiber Reinforced Copolymer 71.866.POLYONE www.polyone.com Product Code - - - PP5312 PP5320 A285 PP5330 A123 PP5340 B2 Reinforcement % - % - 12 20 30 40 Specific Gravity 73°F (23°C) - ASTM D792 0.99 1.05 1.15 1.24 Tensile Strength Yield psi ASTM D638 4800 4400 3600 4900 MPa ISO 527 31 30 32 38 Tensile Elongation Yield % ASTM D638 5 4 4 3 Break % ASTM D638 20 15 20 10 Flexural Modulus 73°F (23°C) psi ASTM D790 285,000 380,000 355,000 460,000 MPa ISO 178 1950 2600 2450 3200 Notched Izod 73°F (23°C) ft-lb/in ASTM D256 0.6 0.55 1.5 0.60 kJ/m2 ISO 180 3.30 3.00 8.25 3.30 Heat Deflection 66 psi °F ASTM D648 235 255 230 280 °C ISO 75 113 124 110 138 264 psi °F ASTM D648 135 156 150 180 °C ISO 75 57 69 66 82 Linear Shrinkage 1/8 in wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 3.2 mm wall % - 1.4–1.9 1.0–1.4 1.1–1.5 0.6–1.0 Offers improved stiffness and heat deflection as well as outstanding dimensional stability. Product Code - - - TP9000 A3 TP9110 A701-SM TP9120 B397 TP9120 A525-SM TP9130 A954 Reinforcement - - - Talc Talc Talc Talc Talc Reinforcement - % - 5 11 18 20 30 Specific 73°F (23°C) - ASTM D792 0.94 0.97 1.01 1.04 1.12 Tensile Yield psi ASTM D638 2400 3000 2750 3600 3450 MPa ISO 527 18 22 19 25 24 Tensile Yield % ASTM D638 12 6 5 4 8 Break % ASTM D638 >400 100 170 30 250 Flexural 73°F (23°C) psi ASTM D790 140,000 260,000 235,000 300,000 325,000 MPa ISO 178 1100 1800 1620 2000 2250 Notched 73°F (23°C) ft-lb/in ASTM D256 No Break 6 10 2 2.2 kJ/m2 ISO 180 68.0 36.0 53.0 11.0 12.0 -30°C ft-lb/in ASTM D256 1.5 1.2 1.3 0.7 0.8 kJ/m2 ISO 180 8.5 6.0 7.0 3.9 4.0 Heat 66 psi °F ASTM D648 160 208 205 220 218 °C ISO 75 83 98 96 110 105 264 psi °F ASTM D648 100 143 140 160 160 °C ISO 75 50 62 57 70 71 Multiaxial Impact @ 6.6 m/s 0°C ASTM D3763 100% Ductile 100% Ductile 100% Ductile -30°C ASTM D3763 100% Ductile 100% Ductile 8 91.866.POLYONE www.polyone.com Maxxam™ HST Filled Polypropylene with High Strength and Stiffness Maxxam™ LO Low Odor Talc-Filled Reinforced grades that provide exceptional levels of strength and stiffness.

7$�( ���1 $&�.�$() $3��� �8/ ��&�"'�� ��! $8 ()=>>2 6? $� �8 �� �$&�!

Read more: https://www.issgovernance.com/esg/ratings/ http://www.sustainalytics.com/ https://www.sustainalytics.com/legal-disclaimers https://www.issgovernance.com/esg/ratings/

What is the normal liquid addition rate? The size range includes: KEY ATTRIBUTES • Customers can expect to get 99%+ yield of liquid contents from a PlanetPak • The square footprint allows effective and efficient transportation & storage • The liner and outer shell can be separated easily and compressed for efficient recycling • The polythene liner remains sealed at all times, eliminating the risk of spills and contamination • Tamper evident and UN rated for safe transportation of classified goods • Food contact approved use PLANETPAK SIZE RANGE 1L 3L 5L 15L 25L ATTRIBUTE FLEXCART FLEXCART MINI MICRO NANO FLEXCART M.I. Footprint (LxW cm) 86 x 71 98 x 38 60 x 35 55 x 30 86 x 80 Typical max. throughput (kg/hr) 1000 625 250 50 120 Max. metering rate (cc/s) 10 10 10 1.8 1.25 Continuous use Yes Yes No No Yes Transfer pumps PC/Peri Peri NA NA PC Metering pumps PC/Peri PC/Peri PC/Peri Peri PC Interchangeable cassette Yes Yes Yes No Yes Typical PlanetPak delivery unit 25L 25L NA 1L 25L Other delivery packaging IBC/LN Drum/LN LN LN NA PC PUMP RATE (cc/rev) 0.09 0.28 0.87 2.6 5.2 RECOMMENDED OUTPUT RANGE (g/min) 0.9 to 9 2.8 to 28 8.7 to 87 26 to 260 53 to 520 PC PUMP MAX (g/min) 18 56 174 520 1040 CONTROLLER CMG 3000 FlexG CMG 5000 CMG 6000 Application Injection Molding Extrusion Melt Injection Volumetric/gravimetric V V (weight data) V/G V/G Data export/network No Yes Yes Yes Touch screen No Yes Yes Yes Multiple log-in levels No No Yes Yes FlexCart Model S Optional Yes No Mini Model S No Yes No Micro Yes No Yes No Nano Yes No No No Melt Injection No No No Yes Choosing a progressive cavity pump for transfer or metering Choosing the controller MAKING THE RIGHT CHOICE Here are the options which should be considered for an informed choice of combinations: (Note: LN = 3, 5 & 10L molded container PC = Progressing Cavity Pump Peri = Peristaltic Pump) Avient can provide support and assistance on every aspect of liquid color and additive processing.

Supplier shall timely provide Avient with (copies of) all applicable licenses, documents, information, specifications and instructions necessary for safe and proper transport, use, Avient Terms and Conditions of Purchase for Goods and/or Services treatment, process and storage of the Goods and with all certificates of analysis/conformity as customarily supplied. 5.3 In addition to all express and implied warranties provided by law or otherwise, Supplier warrants to Avient good and marketable title to the Goods free and clear of all liens and encumbrances and that the Goods shall: (i) conform to all specifications, and other descriptions furnished by Avient, offered by Supplier or agreed and attached hereto, as applicable, and to all samples provided by Supplier; (ii) be new and free from all defects in materials; (iii) be of merchantable quality; (iv) be safe and fit and sufficient for the purposes intended by Avient to the extent known or reasonably knowable by Supplier; (v) conform with all applicable laws in the country of production and delivery (including without limitation EU Chemicals REACH, WEE and RoHS; Occupational Safety and Health Act of 1970, Toxic Substances Control Act, California Health and Safety Code Section 25249.5 et seq. Notwithstanding any limitation of liability set forth in this Agreement, Supplier agrees to fully indemnify Avient for any damages (including third party claims), settlements, fines, costs, fees, etc. suffered or incurred by Avient as a result of a Security Incident. 8. All required Insurance shall be carried with responsible insurance companies of recognized standing which are authorized to do business in the state in which the Services are rendered and are rated B+ VII or better by A.M.

The manufacturer was struggling to find a replacement material with excellent chemical resistance and a high flame retardant rating. The results showed the Avient material outperformed typical FR PC/ABS and had an added bonus: a UL yellow card V0 flammability rating for all colors and some thicknesses.* Avient also used its custom color matching capabilities to provide pre-colored material that simplified molding, while the material’s wide processing window helped accommodate a variety of molding environments. * V0 @ 1.5 and 3.0mm FR PC/ABS failed 0% 20% 40% 60% 80% 100% 120% 140% Virex TB Clorox Broad Spectrum CaviCide SaniCloth Plus wipes FR PC/ABS failed FR PC/ABS failed FR PC/ABS failed FR PC / ABS (1.0% Strain) FR PC / ABS (1.5% Strain) Trilliant HC (1.0% strain) Trilliant HC (1.5% strain) FR PC/ABS failed 0% 20% 40% 60% 80% 100% 120% 140% Virex TB Clorox Broad Spectrum CaviCide SaniCloth Plus wipes FR PC/ABS failed FR PC/ABS failed FR PC/ABS failed FR PC / ABS (1.0% Strain) FR PC / ABS (1.5% Strain) Trilliant HC (1.0% strain) Trilliant HC (1.5% strain) TENSILE STRENGTH RETENTION AFTER 7 DAYS EXPOSURE Both materials were tested according to ASTM D543 for 7 days.

+358 (0)29 509 5000 registry@prh.fi Page: 1 (2) Business ID: 2046676-4 Date and time of creating the document: 01.12.2020 08:37:55 TRANSLATION OF THE EXTRACT FROM THE TRADE REGISTER, ELECTRONIC 01.12.2020 08:37:54 the details in the register Identifiers Name Avient Finland Oy Business ID 2046676-4 Entered in the register 31.03.2007 Company type Limited company Contact details: Postal address Äyritie 8 E 01510 Vantaa Street address Äyritie 8 E 01510 Vantaa Email tina.ahlquist@clariant.com Telephone 0106808500 Fax 0106808509 Name details Name Avient Finland Oy Auxiliary company name Drycolor Registered office Vantaa Share capital Share capital 169.000,00 € Number of shares 1 000 pcs Nominal value of a share 169,00 € Financial period Financial period 01.01 - 31.12 Financial statements The last financial statements submitted 01.01.2019 - 31.12.2019 Representation Page: 2 (2) Business ID: 2046676-4 Statutory representation: Under the law, the Board of Directors represents the company. Representation based on position: By the Chair of the Board and the Managing Director, each on their own, and by any two Board members jointly Persons role surname, first name(s) / company name date of birth / identity code citizenship Chair of the Board of Merklein, Norbert 03.05.1964 Citizen of Germany Norén, Jenny Eva Kristina 18.06.1975 Citizen of Sweden Smeds, Jan-Håkan 22.03.1961 Citizen of Finland Vetter, Alexander Helmut 04.07.1968 Citizen of Germany Managing Director Norén, Jenny Eva Kristina 18.06.1975 Citizen of Sweden Auditor PricewaterhouseCoopers Oy 0486406-8 Auditor with principal responsibility Grönroos, Maria Alice 19.02.1967 Citizen of Finland Additional information No details about beneficial owners have been registered for the company Name history Avient Finland Oy 01.12.2020 - Clariant Plastics & Coatings (Finland) Oy 04.01.2016 - 01.12.2020 Clariant Masterbatches (Finland) Oy 31.03.2007 - 04.01.2016 Source of information: Finnish Patent and Registration Office

8:00 a.m. You are advised to consult any further disclosures we make on related subjects in our reports on Form 10-Q, 8-K and 10-K that we provide to the Effect of exchange rate changes on cash

PP OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Dynaflex™ G2706 28A USP Class VI, ISO 10993, Food contact EtO Soft translucent grade, grippy feel Dynaflex™ G2711 43A USP Class VI, ISO 10993, Food contact EtO Highly colorable solution, grippy feel, low compression set Versaflex™ CL2242 & CL2250 42A/ 50A USP Class VI, ISO 10993, US Food contact EtO Clear boilable grades; ABS, PC bondable Versaflex™ G2705 N 60A USP Class VI, ISO 10993, Food contact EtO/Steam High resilience, low compression set Versaflex™ HC3810 20A-90A USP Class VI, ISO 10993 EtO General purpose, unfilled ABS, PC OVERMOLDING HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versaflex™ OM1040 40A USP Class VI, ISO 10993 EtO Translucent Versaflex™ OM3060 60A USP Class VI, ISO 10993 EtO Clear VERSAFLEX™ CL AND DYNAFLEX™ TPEs OVERMOLDING FOR ERGONOMICS • Adds good tactile surface with soft-touch feel • Available in a variety of color effects and textures • Improves grip, cushion, and comfort • Enhances functional performance like sealing properties, vibration damping, oxygen barrier, and scratch and abrasion resistance • Reduces assembly costs, good processability • Offers excellent adhesion to a wide range of substrates • Glucometers • Medical tools overmolds • Injector pens • Analysis devices VERSALLOY™ HC & VERSAFLEX™ HC TPEs SEALING & RESEALING • Rubbery feel and soft touch • No coring, good puncture, and resealability in static stoppers • Meets low coefficient of friction requirements in dynamic seals • Low extractables • Suitable to overmold onto polyolefins • Sealing and resealing septum • Seals and sanitary gaskets • Syringe plungers and tips MATERIAL DESCRIPTION HARDNESS REGULATORY STERILIZATION CHARACTERISTICS Versalloy™ HC 9210-45N 45A USP Class VI EtO Good processability, HC 9210-55N 55A USP Class VI EtO Good processability, HC 9210-70N 70A USP Class VI EtO Good processability, HC 9220-43N 43A USP Class VI, ISO 10993-4/5 EtO Extrusion grade, high temperature resistance Versaflex™ HC 2110-35N 34A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Resealing, elevated comp set Versaflex™ HC 2110-57B 57A FDA, USP Class VI, ISO 10993 Autoclave EtO radiation Low stiction VERSAFLEX™ CL AND DYNAFLEX™ TPEs HIGH CLARITY GRADES WITHOUT PLASTICIZERS • Water clear grades formulated without phthalate plasticizers • Meets medical regulatory USP Class VI and ISO 10993-4,5 • Food contact and FDA compliant • Autoclave and radiation stable • Low extractable • High clarity (Haze 50 4.1, 100 4.5, 100 4, 70 6, 70 Tensile Modulus (MPa) 2200 2700 2600 2350 1820 1820 Flexural Strength (MPa) 80 90 104 86 68 68 Flexural Modulus (MPa) 2500 2700 2500 2300 1980 1590 HDT: 0.45, 1.8 (MPa) 110, 80 90, 80 100, 89 123, 100 123, 64 100, 70 UL-94 Rating @ 3.0 mm 5VA V-0 5VA V-0 HB V-0 UL-94 Rating @ 1.5 mm V-0 V-0 5VB V-0 HB V-0 UL-94 Rating @ 0.75 mm V-1 V-2 V-0 None None V-2 COMPETITIVE MATERIAL COMPARISON ENGINEERED POLYMER FORMULATIONS FOR HEALTHCARE TRILLIANT™ HC THERMOPLASTICS The family of Trilliant™ HC high-performance thermoplastics is formulated to meet the growing challenges of medical devices and equipment. MATERIAL DESCRIPTION BASE RESIN Trilliant™ HC2020 Copolyester Trilliant™ HC8910/8920 Polyketone/ABS blend Trilliant™ HC2120 Tritan Trilliant™ HC3120 PC Trilliant™ HC5210 PP Trilliant™ HC6010 PA6 Trilliant™ HC6610 PA66 Trilliant™ GRV-NP-110-W PA12 TRILLIANT™ HC THERMOPLASTICS • Chemically resistant replacement for FR PC/ABS, FR PC/PET & FR COPE, providing UL 94 Yellow Card V-0 flame rating at 1.5 mm, V-1 at 0.75 mm thicknesses for a broad color spectrum • Outperforms PC/ABS, PC/PET and COPE in resistance to common disinfectants • Retains tensile strength after 72-hour exposure to common hospital disinfectants, and shows better long-term chemical resistance as compared to PC blends and COPE • Exhibits good impact and temperature resistance • Available in natural grades, standard medical colors, or custom pre-colored products • Medical device housings • MRI, X-ray, CT scanner components • Surgical instruments such as staplers, dissectors, scissors • Auto-injector pen TRILLIANT™ HC ELECTRICALLY CONDUCTIVE FORMULATIONS • Consistent conductivity ensures repeatable part performance and minimizes failures related to inconsistent electrical conductivity • High flow and easy processing facilitate filling of thin wall parts and multiple cavity tools, which enable faster cycle times and lower per-unit part costs • Superior durability reduces breakage and resultant scrap related costs • Less tendency to flash results in improved appearance and less fluid retention in or on the tip, thus driving greater accuracy and less potential for cross-contamination • High strength produces parts with greater stiffness and warp resistance, again minimizing scrap-related costs • Conductive pipette tips TEST TEMS SPECIFIC GRAVITY MELT FLOW RATE (230OC, 2.16KG) TENSILE FLEXURAL FLEXURAL MODULUS IMPACT STRENGTH NOTCHED, IZOD SURFACE RESISTIVITY Method ASTM D-792 ASTM D-1238 ASTM D-638 ASTM D-790 ASTM D-790 ASTM D-256 ASTM D-257 Unit -- g/10min MPa MPa MPa J/m Ohms/sq.

KEY PROPERTIES AND PERFORMANCE FR GRADES H GRADES PEEK GRADES LCP GRADES FLEX GRADES PROPERTIES CONDITION ISO UNIT PPE400FR PPE700FR PPE950FR PPE1200FR H1500HF H2300HF PEEK700 PEEK900 PEEK1000 PEEK1200 LCP650 LCP800 LCP950 FLX400 FLX700 FLX1100 Dielectric Constant (Dk) 2.4 GHz 4.0 7.0 9.5 12.0 15.0 23.0 7.0 9.0 10.0 12.0 6.5 8.0 9.5 4.0 7.0 11.0 Loss Tangent (Df) 2.4 GHz 0.0030 0.0039 0.0042 0.0045 0.0010 0.0037 0.0024 0.0025 0.0024 0.0027 0.0043 0.0045 0.0047 0.0010 0.0009 0.0012 Density 1183 g/cm3 1.44 1.97 2.20 2.50 2.60 3.40 1.94 2.20 2.30 2.40 2.00 2.15 2.30 1.52 1.93 2.50 Melt Flow Index (MFI) 5 kg, 300 °C (unless noted) 1113 g/10 min 17 12 13 5 5 8 15 @ 380 °C 13 @ 380 °C 10 @ 380 °C 6 - - - 11 @ 230 °C 2 @ 230 °C 0.3 @ 230 °C Tensile Strength at Break 23 °C/73 °F 527 MPa 47 52 44 45 23 40 64 62 65 67 75 80 75 11 17 25 Flexural Modulus 23 °C/73 °F 178 MPa 3100 4500 - 9300 2100 5000 6200 7600 9200 11000 8000 8500 8500 1400 1600 2900 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB 42 20 9 17 10 28 25 18 15 31 20 12 NB NB NB -20 °C/-4 °F 180 kJ/m2 - - - - 17 10 - - - - - - - - - Notched Izod 23 °C/73 °F 180 kJ/m2 14 6 4 3 5 4 6 4 4 4 10 6 4 59 23 13 -20 °C/-4 °F 180 kJ/m2 - - - - 5 4 - - - - - - - - - - STANDARD GRADES RADOME GRADES PROPERTIES CONDITION ISO UNIT PPE260 PPE300 PPE320 PPE350 PPE400 PPE440 PPE500 PPE650 PPE800 PPE950 PPE1200 RS260 RB260 RS265FR Dielectric Constant (Dk) 2.4 GHz 2.6 3.0 3.2 3.5 4.0 4.4 5.0 6.5 8.0 9.5 12.0 2.6 2.6 2.7 Loss Tangent (Df) 2.4 GHz 0.0009 0.0009 0.0010 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0010 0.0009 0.0012 0.0032 Density 1183 g/cm3 1.07 1.18 1.21 1.27 1.43 1.50 1.62 1.86 2.10 2.20 2.40 1.06 1.08 1.09 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 15 15 16 14 14 14 15 11 10 4 2 21 16 25 Tensile Strength at Break 23 °C/73 °F 527 MPa 40 45 47 50 50 48 45 43 37 37 36 50 42 52 Flexural Modulus 23 °C/73 °F 178 MPa 2700 2400 2000 2600 2800 2700 2600 2600 2300 2600 2600 2200 2200 2600 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB NB NB NB NB NB NB NB 50 28 24 NB NB NB -20 °C/-4 °F 180 kJ/m2 NB NB NB NB NB NB NB 50 47 27 25 NB NB NB Notched Izod 23 °C/73 °F 180 kJ/m2 8 55 69 35 22 20 15 9 8 5 4 19 14 11 -20 °C/-4 °F 180 kJ/m2 8 15 20 14 12 10 9 8 8 5 4 10 12 10 PREPERM™ SERIES PROPERTIES CONDITION ISO UNIT 8027 8025 8037 8019 8028 8026 8044 8029 8041 8045 8048 8036 8056 8031 Dielectric Constant (Dk) 1 GHz, 23 °C 3.0 3.1 3.4 3.6 3.8 4.4 4.8 5.3 5.4 5.9 6.0 7.0 7.3 9.0 Loss Tangent (Df) 1 GHz, 23 °C 0.0012 0.0012 0.0008 0.0010 0.0010 0.0010 0.0004 0.0008 0.0006 0.0002 0.0006 0.0007 0.0002 0.0007 Density 1183 g/cm3 1.25 1.26 1.35 1.39 1.45 1.59 1.72 1.75 1.79 1.89 1.88 2.06 2.086 2.25 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 16 19 10 11 15 13 10 10 15 15 19 10 18 4.7 Tensile Strength at Break 23 °C/73 °F 527 MPa 59 54 54 62 59 54 52 58 52 45 49 45 37 38 Flexural Modulus 23 °C/73 °F 178 MPa 2780 2560 2850 3060 3350 3700 3157 4300 4320 3137 4150 3370 2560 4200 Notched Izod 23 °C/73 °F 180 kJ/m2 15.3 14 14.8 14 12.6 10.4 9.9 8.6 7.4 7.9 6.6 7.1 6.2 6.8 EDGETEK™ 7600 SERIES Copyright © 2021, Avient Corporation.