POLYSTRAND CONTINUOUS FIBER REINFORCED THERMOPLASTIC TAPES & LAMINATES ™ PRODUCT SELECTION GUIDE Material Min Finished Slit Width Max Finished Slit Width Unidirectional Tape 2” (50.8 mm) 24” (610 mm) X-Ply™, 3-Ply, 4-Ply 2” (50.8 mm) 120” (3048 mm) SLITTING CAPABILITIES Max Unfinished Width Max Finished Slit Width Max Finished Roll Weight Max Roll Length (X-Ply™, Full Width) Up to 125" (3175 mm) Up to 120" (3048 mm) Up to 10,000 lbs (4500 kg) Up to 4,000 ft (1200 m) LAMINATION LINE CAPABILITIES Tape Width Resin Capabilities Fiber Inputs Max Tape Roll Weight Max Roll Length 25" (635 mm) Standard Width, Slit Capabilities PP, PE, PETG, aPET, PA6 Additional polymers in development E-Glass S-Glass, Aramid Up to 1,800 lbs (816 kg) Up to 12,000 ft (366 m) TAPE LINE CAPABILITIES Product Name Resin Fiber Content Areal Weight Nominal Thickness1 Flexural Modulus Flexural Strength Tensile Modulus Tensile Strength wt % lb/ft2 oz/yd2 gsm in mm ksi GPa ksi MPa ksi GPa ksi MPa 6337 PP 63 0.10 14.75 500 0.015 0.38 3570 24.6 58 402 4010 27.6 111 765 6531 65 0.05 7.40 251 0.006 0.15 4020 27.7 73 505 4900 33.8 140 965 6536 0.07 10.32 350 0.009 0.23 4050 27.9 72 494 4500 31.0 131 903 6538 0.14 19.77 670 0.019 0.48 3540 24.4 47 324 4260 29.4 100 689 7034B PP-Black 70 0.07 10.24 347 0.009 0.23 4400 30.3 83 569 5000 34.5 111 765 6020 PE 60 0.08 11.95 405 0.012 0.30 3600 24.8 54 372 3800 26.2 109 752 6621 66 0.10 13.97 474 0.012 0.30 4000 27.6 55 379 4720 32.5 126 869 68222 68 0.16 23.34 791 0.022 0.56 4060 28.0 55 379 4560 31.4 113 779 5843 PETG 58 0.08 11.85 402 0.008 0.20 3680 25.4 90 621 4400 30.3 137 945 5840B aPET-Black 58 0.09 13.00 441 0.009 0.23 4120 28.4 107 738 5080 35.0 150 1034 5860B PA6-Black 58 0.08 11.48 389 0.010 0.25 3620 25.0 104 717 3970 27.4 108 745 TYPICAL PROPERTIES - UNIDIRECTIONAL FIBERGLASS REINFORCED THERMOPLASTIC TAPE 1 Nominal thicknesses indicated are baseline values that may vary depending on material processing and other variables. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 4 hrs @ 250 4 hrs @ 275 (135) 4 hrs @ 250 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General General General General General General General Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

They use words such as “will,” “anticipate,” “estimate,” “expect,” “project,” “intend,” “plan,” “believe,” and other words and terms of similar meaning in connection with any discussion of future operating or financial performance and/or sales. With over 100 Avient production and distribution facilities, all operating with the rigor of Lean Six Sigma principles and excellence, we are proud to serve our valued customers wherever they need us. SEGMENT HIGHLIGHTS U.S. & Canada 50% 26% 16% Latin America 2020 SEGMENT, END MARKET AND GEOGRAPHY 29 GEOGRAPHY REVENUESEGMENT FINANCIALS 21%Industrial Building & Electrical & END MARKET REVENUE All data reflects 2020 Pro forma for acquisition of the Clariant Masterbatch business. (1) The total company sales and EBITDA of $3,783M and $457M, respectively, include intercompany sales eliminations and corporate costs $2,043M $331M $709M $124M $1,110M $70M Sales EBITDA Distribution Specialty Engineered Materials Color Additives and Inks $457M$3,783M 35% 14% Building & Electrical & C O L O R , A D D I T I V E S & I N K S 2020 PF REVENUE | $2 .0 BILLION 31% 40% 22% Latin America END MARKET REGION 30 2020 figures Pro forma for acquisition of the Clariant Masterbatch business S P E C I A LT Y E N G I N E E R E D M AT E R I A L S 24% Wire & Cable(1) 24% Electrical & 13% 11% Building & 2020 REVENUE | $709 MILLION END MARKET 58% 19% REGION 31 (1) Approximately 50% of Wire and Cable sales are associated with Fiber Optic Cabling DI S TR IBU T I ON 2020 REVENUE | $1 .1 B ILL ION 29% 25% 20% 14% Electrical & Building & 1% 82% Latin America END MARKET REGION K E Y S U P P L I ER S 32 AMERICAS EMEA ASIA 26% 19% 13% 16% Building & Electrical & 34% 16%Healthcare 17% Building & Electrical & 32% 27% 12% Building & Electrical & 9% 2020 figures Pro forma for acquisition of the Clariant Masterbatch business TOTA L C O M PA N Y R E G I O N A L S A L E S BY END MARKET (58% of sales) (26% of sales) (16% of sales) 33

We are strongly committed to safety as evidenced by our injury incidence rate of 0.69 per 100 full-time workers per year in 2017 and 0.74 in 2016. Cost of sales As a percent of sales, cost of sales increased from 77.0% in 2016 to 77.7% in 2017 primarily as a result of raw material cost inflation. The graph assumes the investing of $100 from December 31, 2012 through December 31, 2017.

The company reported first quarter sales of $826.6 million compared to $829.0 million in the prior year quarter. EMEA delivered a fourth consecutive quarter of growth, increasing organic sales by 2%. Furthermore, given our strong cash position and expectation for free cash flow this year, we intend to pay down between $100 to $200 million of debt by year-end,” said Ms.

Independent Registered Public Accountant Services and Related Fee Arrangements Report of the Audit Committee The Audit Committee of the Board of Directors Director Independence Lead Director Board Leadership Structure Board’s Oversight of Risk Code of Ethics, Code of Conduct and Corporate Governance Guidelines Communication with Board Board and Committees Board Attendance Board Committees AAudit Committee – Primary Responsibilities and Requirements MEETINGS IN 2018: 9 Compensation Committee – Primary Responsibilities and Requirements MEETINGS IN 2018: 5 MEMBERS: Nominating and Governance Committee – Primary Responsibilities and Requirements MEETINGS IN 2018: 4 Environmental, Health and Safety Committee – Primary Responsibilities and Requirements MEETINGS IN 2018: 3 Board Refreshment 0% 20% 40% 60% 80% 100% 5 or fewer 6 to 10 More than 10 Years of Service NON-EMPLOYEE DIRECTOR COMPENSATION 2018 NON-EMPLOYEE DIRECTOR COMPENSATION Role Annual Cash Retainers 2018 Director Compensation Table Fees Earned or Paid in Cash Stock Awards Total (1) NON-EMPLOYEE DIRECTOR COMPENSATION Fees Earned or Paid in Cash (column (a)) Stock Awards (column (b)) Option Awards Outstanding and Fully-Vested Deferred Shares Number of Deferred Shares(1) Beneficial Ownership of Our Common Shares Owned(1) Right to Acquire Shares Total Beneficial Ownership Name and Address Shares % of Shares Stock Ownership Guidelines for Non-Employee Directors Section 16(a) Beneficial Ownership Reporting Compliance Executive Summary Name Title How Pay is Tied to Company Performance. Base Salary Annual Incentive Long- Term Consolidated Company Adjusted 60% Consolidated Company Revenue 25% Consolidated Company Working Capital as a Percentage of Sales 15% Corporate Annual Plan Weightings Adjusted Operating Income (Business Unit results) 40% Adjusted Operating Income (consolidated Company results) 20% Business Unit Revenue 25% Business Segment Working Capital as a Percentage of Sales 15% Business Unit Annual Plan Weightings 2018 Corporate Plan (Patterson, Richardson, Garratt, Kunkle) Measure Weighting Threshold Target Maximum Results Payout % 2018 CAI Plan (Crist) Measure Weighting Threshold Target Maximum Results Payout % Long-Term Incentive.

Rejoin™ PCR着色剂将消费后可回收（PCR）材 料用作载体树脂，以实现100%PCR包装。 它取代 了原生树脂，让品牌所有者能够实现宏伟的可持 续发展目标⸺100%使用PCR制造瓶子等硬质包 装或其它产品。 主要特性 实现100%PCR包装 助力企业实现可持续发展目标 取代原生树脂，降低能耗并减少排放* 在单一解决方案中可将着色剂和功能添加剂 合二为一，使用方便。

Microsoft Word - PolyOne India Terms and Conditions of Sale of Products.052716.doc TERMS AND CONDITIONS These Terms and Conditions apply to the sale of Products by PolyOne Corporation and its subsidiaries. 1. These Terms and Conditions apply to all sales by PolyOne Corporation and its affiliated companies. UN Convention The United Nations Convention respecting Contracts for the International Sale of Goods shall not apply to transactions under this contract. 15.

Processing Guidelines Base Resin PA6 Barrel Temperatures °F °C Rear Zone 440–470 227–243 Center Zone 450–480 232–249 Front Zone 460–490 238–254 Nozzle 470–500 243–260 Melt Temperature 470–500 243–260 Mold Temperature 120–180 49–82 Pack and Hold Pressure 50–75% of Injection Pressure Injection Velocity 0.5 in/s–3 in/s 13 mm/s–76 mm/s Back Pressure 50–100 psi 3.4–6.9 Bar Screw Speed 30–70 rpm Cushion 0.25 in 6.35 mm Drying Parameters 2–4 Hours @ 180°F 2–4 Hours @ 82°C Moisture % Allowable 0.08–0.18%* Screw Type General Purpose Screw Screw Compression Ratio 2.0:1– 2.5:1 Screw L/D 20:1 Non-return Check Valve Free Flow Check Ring Nozzle Type Reverse Taper Clamp Pressure 2–3 Tons/in² Barrel Capacity 30-80% of barrel should be used * Avient suggests measuring moisture using a Karl Fischer method or Vapor Pro® moisture analyzer that titrates only for moisture. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.

Injection Molding Parameters Base Resin PA6 PA6 IM/ST PA6 GF PA6 GMF PA66 IM/ST PA66 GF Barrel Temperatures °F (°C) Rear Zone 450–490 (232–254) 440–490 (226–254) 490–510 (254–265) 480–500 (249–260) Center Zone 460–500 (238–260) 450–500 (232–260) 500–520 (260–271) 490–510 (254–265) 520–540 (271–282) Front Zone 470–510 460–510 (237–265) 500–520 (260–271) Nozzle 480–520 (249–271) 470–510 515–530 (268–276) 530–560 (276–293) 540–560 (282–293) Melt Temperature °F (°C) 480–520 (249–271) 470–510 515–530 (268–276) 540–560 (282–293) Mold Temperature °F (°C) 120–180 (49–82) 120–180 (49–82) 120–200 (49–93) 120–200 (49–93) 140–220 (60–104) 140–220 (60–104) Pack and Hold Pressure 50–80% of Injection Pressure Injection Velocity 1.0–4.0 in/sec Back Pressure 25–100 psi Screw Speed 35–80 rpm Drying Parameters 4 hours @ 180°F (82°C) Moisture Allowable 0.1–0.2% Cushion 0.250 in Screw Compression Ratio 2.0:1–2.5:1 Nozzle Type Reverse Taper Clamp Pressure 3–5 tons/in2 Processing Guide 3 Start Up & Shut Down Recommendations Purge Compound Polypropylene Recycling Recycling prime grades up to 20% is permissible and recycling PIR or PCR grades up to 10% is permissible. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your sales representative for property ranges and min/max specifications.