Explore our complete line of cost-effective, performance driven material options

Met strength and corrosion requirements while achieving cost savings and reduced processing steps versus a die-cast aluminum part

For most consumers, the added ease of use is well worth the extra cost.

It may also help to streamline lead times or avoid costs associated with performing multiple rounds of physical testing.

The new formulation allowed them to go after new markets, including commercial kitchens, and improved cost efficiencies to balance the increased part size.

Tool Steel • P20 tool steel is acceptable when proper processing and shut down procedures are followed • Chrome plating or PH stainless steel is preferred for all halogen-based systems • The use of stainless steel in hot runner systems is highly suggested • Avoid the use of aluminum when designing production tools Vents • Place vents at the end of fill and anywhere potential knit/weld lines will occur • All vents need to be vented to atmosphere • Cut vent depths to 0.0010"–0.0015" with a minimum 0.040" land length.

To do so the following procedure was carried out: • Preforms were produced by dosing 0.09% of Avient Fortis Amber-1 and 4% of our nylon- based oxygen scavenger Amosorb SolO2-2 • Preforms were ground down to a coarse granule size (~2mm) using a Retsch mill • The coarse ground preforms were crystallized in a vacuum oven at 160°C before drying the material in a PET drier at 160°C for approx. 4 hours • This material was then injection molded and blown into bottles with a) 50:50 dilution with Virgin PET with no color and b) 50:50 dilution with Virgin PET + Fortis Amber-1 at 0.045% Figure 2.

Synergistically combines long carbon and long glass fiber together in a unified material to optimize performance and cost Complēt™ LGF, moisture-resistant grade delivers improved performance and cost savings for aftermarket parts manufacturer Complēt™ long glass fiber reinforced nylon composite consolidated multiple metal components into a unified seat shell permitting weight and cost reductions

This procedure can minimize the potential for overpacking and prevent flash in vents.

Andra av Avients policyer och procedurer kan kanske ge den mer specifika information som du behöver. Du måste också efterleva alla Avients policyer, procedurer och lokala specifika regler för arbete och uppförande. Du får aldrig försöka komma runt interna kontroller och procedurer och måste alltid samarbeta med Avients interna och externa revisorer och vara öppen och ärlig med dem.