CESA BLOCK – STANDARD OFFERINGS POLYMER FAMILY MATERIAL PRODUCT NAME DOSAGE Polyolefin PEA0820045 CESA Block PEA0820045 1–5% Polypropylene PPA0820056 CESA Block PPA0820056 1–5% Polyamide ABA0820022 CESA Block ABA0820022 2–6% Polyester NBA0820024 CESA Block NBA0820024 1–5% Styrenic SLA0820010 CESA Block SLA0820010 1–5% TPU RUA0820028 CESA Block RUA0820028 1–5% CESA Block additives can be used in combination with other CESA masterbatches, and formulations can be customized for most applications.

KEY PROPERTIES AND PERFORMANCE FR GRADES H GRADES PEEK GRADES LCP GRADES FLEX GRADES PROPERTIES CONDITION ISO UNIT PPE400FR PPE700FR PPE950FR PPE1200FR H1500HF H2300HF PEEK700 PEEK900 PEEK1000 PEEK1200 LCP650 LCP800 LCP950 FLX400 FLX700 FLX1100 Dielectric Constant (Dk) 2.4 GHz 4.0 7.0 9.5 12.0 15.0 23.0 7.0 9.0 10.0 12.0 6.5 8.0 9.5 4.0 7.0 11.0 Loss Tangent (Df) 2.4 GHz 0.0030 0.0039 0.0042 0.0045 0.0010 0.0037 0.0024 0.0025 0.0024 0.0027 0.0043 0.0045 0.0047 0.0010 0.0009 0.0012 Density 1183 g/cm3 1.44 1.97 2.20 2.50 2.60 3.40 1.94 2.20 2.30 2.40 2.00 2.15 2.30 1.52 1.93 2.50 Melt Flow Index (MFI) 5 kg, 300 °C (unless noted) 1113 g/10 min 17 12 13 5 5 8 15 @ 380 °C 13 @ 380 °C 10 @ 380 °C 6 - - - 11 @ 230 °C 2 @ 230 °C 0.3 @ 230 °C Tensile Strength at Break 23 °C/73 °F 527 MPa 47 52 44 45 23 40 64 62 65 67 75 80 75 11 17 25 Flexural Modulus 23 °C/73 °F 178 MPa 3100 4500 - 9300 2100 5000 6200 7600 9200 11000 8000 8500 8500 1400 1600 2900 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB 42 20 9 17 10 28 25 18 15 31 20 12 NB NB NB -20 °C/-4 °F 180 kJ/m2 - - - - 17 10 - - - - - - - - - Notched Izod 23 °C/73 °F 180 kJ/m2 14 6 4 3 5 4 6 4 4 4 10 6 4 59 23 13 -20 °C/-4 °F 180 kJ/m2 - - - - 5 4 - - - - - - - - - - STANDARD GRADES RADOME GRADES PROPERTIES CONDITION ISO UNIT PPE260 PPE300 PPE320 PPE350 PPE400 PPE440 PPE500 PPE650 PPE800 PPE950 PPE1200 RS260 RB260 RS265FR Dielectric Constant (Dk) 2.4 GHz 2.6 3.0 3.2 3.5 4.0 4.4 5.0 6.5 8.0 9.5 12.0 2.6 2.6 2.7 Loss Tangent (Df) 2.4 GHz 0.0009 0.0009 0.0010 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0009 0.0010 0.0009 0.0012 0.0032 Density 1183 g/cm3 1.07 1.18 1.21 1.27 1.43 1.50 1.62 1.86 2.10 2.20 2.40 1.06 1.08 1.09 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 15 15 16 14 14 14 15 11 10 4 2 21 16 25 Tensile Strength at Break 23 °C/73 °F 527 MPa 40 45 47 50 50 48 45 43 37 37 36 50 42 52 Flexural Modulus 23 °C/73 °F 178 MPa 2700 2400 2000 2600 2800 2700 2600 2600 2300 2600 2600 2200 2200 2600 Unnotched Izod 23 °C/73 °F 180 kJ/m2 NB NB NB NB NB NB NB NB 50 28 24 NB NB NB -20 °C/-4 °F 180 kJ/m2 NB NB NB NB NB NB NB 50 47 27 25 NB NB NB Notched Izod 23 °C/73 °F 180 kJ/m2 8 55 69 35 22 20 15 9 8 5 4 19 14 11 -20 °C/-4 °F 180 kJ/m2 8 15 20 14 12 10 9 8 8 5 4 10 12 10 PREPERM™ SERIES PROPERTIES CONDITION ISO UNIT 8027 8025 8037 8019 8028 8026 8044 8029 8041 8045 8048 8036 8056 8031 Dielectric Constant (Dk) 1 GHz, 23 °C 3.0 3.1 3.4 3.6 3.8 4.4 4.8 5.3 5.4 5.9 6.0 7.0 7.3 9.0 Loss Tangent (Df) 1 GHz, 23 °C 0.0012 0.0012 0.0008 0.0010 0.0010 0.0010 0.0004 0.0008 0.0006 0.0002 0.0006 0.0007 0.0002 0.0007 Density 1183 g/cm3 1.25 1.26 1.35 1.39 1.45 1.59 1.72 1.75 1.79 1.89 1.88 2.06 2.086 2.25 Melt Flow Index (MFI) 5 kg, 300 °C 1113 g/10 min 16 19 10 11 15 13 10 10 15 15 19 10 18 4.7 Tensile Strength at Break 23 °C/73 °F 527 MPa 59 54 54 62 59 54 52 58 52 45 49 45 37 38 Flexural Modulus 23 °C/73 °F 178 MPa 2780 2560 2850 3060 3350 3700 3157 4300 4320 3137 4150 3370 2560 4200 Notched Izod 23 °C/73 °F 180 kJ/m2 15.3 14 14.8 14 12.6 10.4 9.9 8.6 7.4 7.9 6.6 7.1 6.2 6.8 EDGETEK™ 7600 SERIES Copyright © 2021, Avient Corporation.

KEY CHARACTERISTICS Formulated with bio-based resin and/or 10–50% filler from renewable plant sources, Maxxam BIO formulations: • Reduce product carbon footprint • Achieve equivalent performance to standard polyolefin formulations • Provide good stiffness, durability, impact resistance and UV stability • Deliver good surface finish and are easy to color • Enable customized performance characteristics depending on application need • Offer food contact compliance MARKETS AND APPLICATIONS Maxxam BIO formulations are suitable for use across many industries and applications where traditional polyolefin materials are used, including: • Transportation Interior Applications - Decorative profiles, trunk side liners, pillars, T-cup • Industrial - Structural parts, furniture • Consumer - Household goods, personal care items, packaging, office supplies, food contact applications • Electrical and Electronic – Housings, buttons, junction boxes SUSTAINABILITY BENEFITS • Formulated with bio-based resin and/or 10–50% natural filler • Utilize natural filler from renewable plant sources including olive seed based powder and cellulose fiber • Offer a lower product carbon footprint compared to traditional petroleum-based feedstock • Can be recycled at end of life PRODUCT BULLETIN CHARACTERISTICS UNITS Maxxam BIO MX5200-5036 Natural FD Maxxam BIO MX5200-5030 Natural FD Maxxam BIO MX5200-5030 Natural FD X1 Maxxam BIO MX5200-5001 Maxxam BIO MX5200-5033 Maxxam BIO MX5200-5034 Maxxam BIO MX5200-5035 Filler/Reinforcement Unfilled Unfilled Unfilled 30% Glass Fiber 10% 20% 30% Density (ISO 1183) g/cm 0.90 0.90 0.90 1.12 0.96 1.03 1.12 Tensile Modulus (ISO 527-1) @ 23°C MPa 1500 1000 1000 6400 1350 1650 2100 Tensile Stress (ISO 527-2) @ 23°C MPa 27.0 20.0 20.0 75.0 13.0 14.0 15.0 Tensile Strain at Break % 5 50 50 3.0 50 37 18 Charpy Notched (ISO 179) kJ/m 5 20 25 10 12 10 10 CHARACTERISTICS UNITS Maxxam BIO MX5200-5023 RS HS HI Natural 70 Maxxam BIO MX5200-5025 RS HS Natural 70 Maxxam BIO MX5200-5004 RS HS Maxxam BIO MX5200-5003 RS Maxxam BIO MX5200-5009 RS HS Natural 70 Maxxam BIO MX5200-5024 RS HS Maxxam BIO MX5200-5022 RS HS Filler/Reinforcement 15% Olive Seed Based 25% Olive Seed Based 30% Olive Seed 10% 35% Olive Seed 5% 15% Olive Seed 17% Glass Fiber/ 20% Olive Seed 20% Glass/ 10% Olive Seed 20% Density (ISO 1183) g/ccm 1.00 1.15 1.10 1.07 1.09 1.25 1.10 Tensile Modulus (ISO 527-1) @ 23°C MPa 1750 2000 2700 2500 3800 3500 4100 Tensile Stress at Break MPa 21.0 20.0 30.0 20.0 40.0 35.0 42.0 Tensile Strain at Break % 24 5 3 5 3 4 2 Notched Izod (ISO 180) kJ/m 15 7 3 2 5 15 7 MAXXAM BIO POLYOLEFINS – BIO-BASED RESIN – TECHNICAL PERFORMANCE MAXXAM BIO POLYOLEFINS – OLIVE SEED BASED FILLER – TECHNICAL PERFORMANCE CHARACTERISTICS UNITS Maxxam BIO MX5200-5029 NF HI UV Black X1 Maxxam BIO MX5200-5032 NFS UV Natural Maxxam BIO  MX5200-5020 NF/NFS UV Natural X1​ Maxxam BIO MX5200-5016 NF Natural Filler/Reinforcement 10% Cellulose Fiber 20% Cellulose Fiber 30% Cellulose Fiber 40% Cellulose Fiber Density (ISO 1183) g/ccm 0.95 1.00 1.02 1.07 Tensile Modulus ISO 527-1) @ 23°C MPa 1550 1750 2640 3600 Tensile Stress at Break (ISO 527-2) @ 23°C MPa 33 30 48 55 Tensile Strain at Break (ISO 527-2) @ 23°C % 8 12 9 4 Charpy Notched Impact Strength (ISO 179/1eA) kJ/m2 5 6 5 5 Charpy Unnotched Impact Strength (ISO 179/1eU) kJ/m2 33 49 38 30 MAXXAM BIO POLYOLEFINS – CELLULOSE FIBER FILLER – TECHNICAL PERFORMANCE Copyright © 2023, Avient Corporation.

U KAS MANAC〔M〔N丁 SYSTEMS 0005 、端；薰；; HCSGS 13485 2016 Olin ：氨 城心〔找n心亡〔 ．．八 护、产、八 j丹月六户 八八月户 八月月‘、 ）如》 称资熨面蔚若三 「｛羹 StS55G S GSlfS5SG56SGSGSGSGSGSG5G5 f5 嚷i羹羹巍熊燕鬓；；奎忿 rage I Oil;；燕七 :终 sds 0Gs、 山5互 0s's""“ 刀之： J"‘、 ,slttiGsti.' 5‘冲」之七乃竿月 rf』J枯：“号淤，石 「3 ;:;This certificate is valid from 20 February 2021 until 19 February 2024 S SGSGS and remains valid subject to satisfactor y surveillance audits Re certification audit due before 6 January 2024 Issue 6. SGS6SC SGSOS SG5G$5, tlSCSGS 'eSliS SO CSCSGSGSG ,,GSGSGSG Stisir GSGSOSGSCSCSGSCSG SGSCSGss GS SGSGSGSCSSSOSOSCSGSGSC5GSG 5eSCSOS OOOCS,- SGSOSGSG5G COG GSGSGSGSSSGSGSCSCSG 50nssti5 ' G$TsGsGsGshscscsoSc,SGS -ISGSGSGOSGSGSG' 5 5tiSr. .

A NR 989/2002 - ZMIENIONO §§ 4; 7 UST. 1, 2, 5; 9 UST. 2, 3, 4; 11 UST. 2, 5; 11A UST. 4; 12 UST. 2; 13 UST. 2; 17 UST. 2 UMOWY SPÓŁKI; 2 20.01.2010 R , REP. A NR 18738/2012 - ZMIENIONO §4, DODANO §3 UST. 3 ORAZ ZMIENIONO §11 UST. 5 UMOWY SPÓŁKI. 5 AKT NOTARIALNY Z DNIA 11.06.2012 R., REP. 5.Czy obligatoriusze mają prawo do udziałów w zysku?

SOCIETE A RESPONSABILITE LIMITEE 5.Nazwa rejestru, numer w rejestrze, określenie ogranu prowadzącego rejestr i przechowującego akta przedsiębiorcy zagranicznego REGISTRE DE COMMERCE ET DES SOCIETES B226205 LUXEMBOURG BUSINESS REGISTERS G.I.E. 6.Prawo państwa właściwego dla przedsiębiorcy zagranicznego, jeśli przedsiębiorca nie podlega prawu jednego z państw członkowskich UE lub EFTA - stron umowy o EOG WIELKIE KSIĘSTWO LUKSEMBURGA 7.Dane o wcześniejszej rejestracji ------ 8.Czy przedsiębiorca prowadzi działalność gospodarczą z innymi podmiotami na podstawie umowy spółki cywilnej? KUTNO, kod 99-300, poczta KUTNO, kraj POLSKA Strona 1 z 5 3.Siedziba i adres zakładu głównego przedsiębiorcy zagranicznego kraj LUKSEMBURG, woj. Rubryka 4 ­ Umorzenie prowadzonej przeciwko podmiotowi egzekucji z uwagi na fakt, że z egzekucji nie uzyska się sumy wyższej od kosztów egzekucyjnych Dział 5 Nie dotyczy Dział 6 Rubryka 1 ­ Likwidacja Rubryka 2 ­ Informacje o rozwiązaniu lub unieważnieniu podmiotu Rubryka 3 ­ Zarząd komisaryczny Rubryka 4 ­ Informacja o połączeniu, podziale lub przekształceniu Rubryka 5 ­ Informacja o postępowaniu upadłościowym Rubryka 6 ­ Informacja o postępowaniu układowym Rubryka 7 ­ Informacje o postępowaniach restrukturyzacyjnych lub o przymusowej restrukturyzacji dotyczące oddziałów przedsiębiorstw zagranicznych Strona 4 z 5 Rubryka 8 ­ Informacja o zawieszeniu działalności gospodarczej data sporządzenia wydruku 23.12.2021 adres strony internetowej, na której są dostępne informacje z rejestru: ekrs.ms.gov.pl Strona 5 z 5

Carretera de Vic a Olot (C153) km.5 Baspinar (Organize) Osb Mah O.S.B. 5 Bölge 83539 Nolu Cad.

If the machine is not capable of being controlled by fill speed, set the injection pressure high enough to fill the runner system and cavity in about 1 to 5 seconds. It should take another 1 - 5 seconds to fill the cavities.

Syncure™ XLPE Cross-linkable Polyethylene Formulations FOR LOW VOLTAGE CABLES PRODUCT SELECTION GUIDE Syncure™ XLPE MOISTURE CROSS-LINKABLE POLYETHYLENE INSULATION FOR LOW VOLTAGE CABLE SYSTEMS SYSTEM S100FH S100FH-XUV S100FH-UV S100FV S100FV-UV S112NA S120NA S200FH S200FV Applications Building Wire, Building Wire, Photo-Voltaic (PV) Wire Building Wire, Teck-90 Pipe and Tube Building Wire, Tray Cable, Service Entrance Building Wire, Tray Cable, Service Entrance Specification UL 44 UL 44 UL 44, UL 4703 UL 44 UL 44 CSA 22.2 Suitable for NSF 61 UL 44 UL 44 Wire Type XHHW-2, RHW-2, USE-2, XHHW-2, RHW-2, USE-2, SIS XHHW-2, RHW-2, USE-2, SIS, PV XHHW-2, RHW-2, XHHW-2, RHW-2, USE-2, SIS, PV RW-90, Teck-90 – RHW-2, RHW, RHH, XHHW-2, XHH, XHHW, SIS RHW, RHH, RHW-2 Components % 83% S1054A 17% V0022G RoHS 83% S1054A 17% V0022G-UV RoHS 70% S1054A 30% V0022G-UV RoHS 50% S1054A 50% V0044G RoHS 50% S1054A 50% V0044G-UV RoHS 95% S1054A 5% S1000B 95% S1016A 5% S1037B 78% S1054A 22% SC5400-0002 RoHS MB ALT FR 50% S1054A 50% SC5400-0003 RoHS MB ALT FR Features Horizontal Flame Horizontal Flame, UV Resistant, Colors Possible Horizontal Flame, FV-1 Flame, UV Resistant, Colors Possible VW-1 VW-1, UV Resistant, Colors Possible Non-FR Rigid Pipe Applications Horizontal Flame, DBDPE-free VW-1, DBDPE-free GENERAL PROPERTIES Specific Gravity 1.01 1.02 1.10 1.31 1.31 0.92 0.95 1.01 1.31 Hardness Shore D, 10 Seconds 47 47 47 48 48 47 59 47 48 Gel 68 68 70 70 70 72 72 68 70 TENSILE PROPERTIES Tensile Strength (psi) 2800 2500 2650 3200 2650 2800 4500 2800 3200 Elongation % 400 400 540 470 540 400 80 400 470 Tensile Retention % 100 100 97 110 110 95 75 95 100 Elongation Retention % 90 90 94 100 100 90 75 90 93 ELECTRICAL Dielectric Strength (V/mil) 1000 1400 1400 1200 1200 1000 – 1000 1200 Dielectric Constant 2.31 2.45 2.61 2.61 2.61 2.24 2.1 2.31 2.61 Dissipation Factor % 0.0012 0.0080 0.008 0.0043 0.0043 0.0008 0.002 0.0012 0.0043 THERMAL Temperature Rating °C 90 90 90 90 90 90 125 90 90 Heat Deformation % 10 5 5 5 5 10 10 10 5 The Syncure™ XLPE portfolio is a two-step, silane- grafted, moisture cross-linkable polyethylene system.

If the machine is not capable of being controlled by fill speed, set the injection pressure high enough to fill the runner system and cavity in about 1 to 5 seconds. It should take another 1 - 5 seconds to fill the cavities.