Base Resin PC PC/PSU PES PEI PP ABS PEEK PA Barrel Temperatures* °F (°C) Rear Zone 530–560 (277–293) 550–575 (288–302) 660–700 (349–371) 675–725 (357–385) 390–420 (199–216) 425–460 (219–238) 680–730 (360–388) 430–500 (221–260) Center Zone 515–560 (269–288) 540–565 (282–296) 650–690 (343–366) 655–710 (352–377) 380–405 (193–207) 415–450 (213–232) 670–710 (354–377) 420–490 (216–254) Front Zone 510–525 (266–274) 530–555 (277–291) 640–680 (338–360) 655–700 (346–371) 370–395 (188–202) 405–440 (207–227) 650–690 (343–366) 410–480 (210–249) Nozzle 520–535 (271–280) 540–565 (282–296) 650–690 (343–366) 665–710 (352–377) 380–400 (193–204) 415–450 (213–232) 660–700 (349–371) 420–490 (216–254) Melt Temperature 525–560 (274–293) 530–580 (277–304) 650–700 (343–371) 660–730 (349–388) 375–395 (191–202) 410–460 (210–238) 650–730 (343–388) 420–500 (216–260) Mold Temperature 175–250 (80–121) 160–220 (71–104) 280–350 (138–177) 275–350 (135–177) 100–135 (38–57) 150–180 (66–82) 300–425 (149–219) 160–230 (71–110) Pack & Hold Pressure 50%–75% of Injection Pressure Injection Velocity in/s 0.5–2.0 Back Pressure psi 50 Screw Speed rpm 40–70 40–70 40–70 40–70 40–70 40–70 40–70 40–70** Drying Parameters °F (°C) 6 hrs @ 250 (121) 4 hrs @ 250 (121) 4 hrs @ 275 (135) 4 hrs @ 250 (121) 3 hrs @ 300 (150) 2 hrs @ 200 (93) 3 hrs @ 275 (135) 4 hrs @ 180 (82) Cushion in 0.125–0.250 Screw Compression Ratio 2.0:1–2.5:1 2.0:1–2.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 2.5:1–3.5:1 Nozzle Type General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Reverse Taper Clamp Pressure 5–6 Tons/in2 * A reverse temperature profile is important to obtain optimum conductive properties. Cut vent depths to: - PC Compounds: 0.001"–0.002" depth and 0.250" width - PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width - PES Compounds: 0.003"–0.004" depth and 0.250" width - PEI Compounds: 0.001"–0.003" depth and 0.250" width - PP Compounds: 0.001"–0.002" depth and 0.250" width - ABS Compounds: 0.0015"–0.0025" depth and 0.250" width - PEEK Compounds: 0.002"–0.004" depth and 0.250" width - Nylon Compounds: 0.002" min. depth and 0.250" width • Increase vent depth to 0.040" (1.0mm) at 0.250" (4.0mm) away from the cavity and vent to atmosphere.

Sweden Filial Address: Drottninggatan 56 411 07 GÖTEBORG County and municipality: Västra Götaland, Göteborg Note: MANAGING DIRECTOR 630516 Palm, Christoph, Gruss Strooss 35, L-9991 WEISWAMPACH, LUXEMBURG AUDITORS 556053-5873 Ernst & Young Aktiebolag, Box 7850, 103 99 STOCKHOLM Represented by: 850807-5135 PRINCIPALLY RESPONSIBLE AUDITOR 850807-5135 Edman, Mikael Thomas Gunnar, c/o Ernst & Young AB, 401 82 GÖTEBORG SIGNATORY POWER Signatory power alone by Palm, Christoph FINANCIAL YEAR Registered financial year: 0101 - 1231 DATE OF REGISTRATION OF CURRENT AND PREVIOUS BUSINESS NAMES 2021-11-29 Avient S.à r.l., Sweden Filial 2018-08-28 PolyOne S.à.r.l., Sweden Filial INFORMATION ABOUT THE FOREIGN COMPANY B226205 Avient S.á.r.l. 19, Route de Bastogne L-9638 Pommerloch LUXEMBURG Registered office of the foreign company: Pommerloch Name of the register in which the foreign company is registered: e-Certificate of registration Swedish Companies Registration Office BRANCH D1a- 6858922 Registration number Date of registration of the company Document created on Date of registration of current name Page 516411-5031 2018-08-28 2021-11-30 17:11 2021-11-29 3 (3) RCS, Registre de Commerce, Luxembourg Business Register LUXEMBURG Foreign company's financial year: 0101 - 1231 The above information is an extract from the Trade and Industry Register Bolagsverket, the Swedish Companies Registration Office.

Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475(200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480(205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490(210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500(215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515(215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200(60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Processing Guide 3 Base Resin ABS PA PBT PC PE PEEK PP PPS Barrel Temperatures °F (°C) Rear Zone 400–475(200–250) 480–540 (248–282) 480–520 (250–270) 480–570 (250–300) 400–445 (200–230) 660–700 (350–475) 400–440 (200–225) 520–600 (270–300) Center Zone 410–480(205–253) 490–550 (254–287) 485–525 (251–273) 500–580 (260–305) 410–455 (207–237) 670–710 (357–385) 410–450 (205–230) 550–610 (285–310) Front Zone 420–490(210–257) 500–560 (260–293) 490–530 (254–276) 515–590 (267–310) 420–465 (213–243) 680–720 (363–400) 420–455 (215–235) 570–620 (300–320) Nozzle 425–500(215–260) 510–570 (265–298) 490–540 (254–282) 530–600 (275–315) 430–475 (220–250) 700–730 (370–395) 430–460 (220–240) 610–620 (320–325) Melt Temperature 425–515(215–270) 510–570 (265–298) 490–540 (254–282) 530–615 (275–325) 430–495 (220–260) 700–725 (370–385) 430–475 (220–250) 610–635 (320–335) Mold Temperature 140–200(60–90) 150–300 (65–148) 140–280 (60–137) 160–240 (70–115) 80–140 (25–60) 300–400 (150–200) 80–140 (25–60) 190–300 (90–150) Drying Parameters 190 (90) 2–4 Hours 0.01%–0.15% 180 (82) 4–5 Hours 0.10%–0.20% 275 (135) 3–4 Hours 0.02%–0.04% 250 (125) 3–4 Hours 0.02% 160 (70) 2 Hours 300 (150) 3–4 Hours 0.10% 160 (70) 2 Hours 280 (135) 2–3 Hours 0.01%–0.20% Nozzle Type General Purpose Nylon or Reverse Taper General Purpose General Purpose General Purpose General Purpose General Purpose General Purpose Injection Velocity1 2–5 in/sec; 50–127 mm/sec Injection Pressure Medium to high (may range from 1,000–4,000 psi; 7-28 Mpa) Back Pressure 50–100 psi; 0.3–0.7 Mpa Screw Speed 25–75 RPM Cushion 0.125–0.250 in; 3–6 mm Screw Compression Ratio2 2.0:1–2.5:1 Comments 1. PC Compounds: 0.001"–0.002" depth and 0.250" width PC/PSU Compounds: 0.002"–0.003" depth and 0.250" width PES Compounds: 0.003"–0.004” depth and 0.250" width PEI Compounds: 0.001"–0.003” depth and 0.250" width PP Compounds: 0.001"–0.002” depth and 0.250" width ABS Compounds: 0.0015"–0.0025” depth and 0.250" width PEEK Compounds: 0.002"–0.004” depth and 0.250" width Nylon Compounds: 0.002" min. depth and 0.250" width Increase vent depth to 1.0mm (0.040") at 4.0mm (0.250") away from the cavity and vent to atmosphere.

AB veya Birleİik Krallık'taysanız, Avient AB ve Birleİik Krallık dıİındaki tüm veri ithalatçılarının AB ve Birleİik Krallık'ta elde ettikleri tüm kiİisel bilgileri Avrupa Komisyonu tarafından onaylandıİı İekilde denetimciden denetimciye standart sözleİme hükümlerine ("Hükümler") uygun olarak iİlemek ve korumak için uymak zorunda oldukları İartlar kapsamında Grup İçi Uluslararası Veri Transferi Sözleİmesi imzalamıİtır.

Cesa Laser Marking Additives can be used with thermoplastics commonly used in vehicles including: • PP • PC/ABS • Polyamide • Polyacetal (POM) WHY SELECT LASER MARKING?

KEY CHARACTERISTICS • Available for polyethylene, polypropylene, ABS, polycarbonate and styrenics • Bio-content of resin carrier varies from 70% to 100% depending on polymer—calculated to ASTM D6866 standard • Manufactured at four ISO 13485 certified sites, providing global consistency and security of supply • Documented change control beyond CAS number, reducing risk of change • Drop-in solutions that can be processed like fossil-based grades on common injection molding and extrusion machines • Can be provided as ready-to-use pre-colored or additive formulation REGULATORY SUPPORT • Raw materials tested to: - ISO 10993-1 - USP and (incl. class VI) - European Pharmacopeia, monograph 3.1.3/ 3.1.5 (polyolefin packaging materials) - USP (polyethylene) - Elemental impurities as per ICH Q3D • Registered Drug Master File (Type III) and/or Device Master File • Food contact according to US FDA and APPLICATION BULLETIN Sustainability Spotlight Bio-polymers Healthcare use limitations apply—see below.

APPLICATION BULLETIN PRODUCT NAME SUITABLE FOR APPLICATION LDR Cesa™ Stat OCA0025695 PP Permanent reduction of dust attraction in interior From 5% Cesa™ Stat OCA0025609 PC/ABS, PA6, PC/ASA Permanent reduction of dust attraction in interior From 8% Cesa™ Stat OCA0025603 LDPE, TPE Permanent reduction of dust attraction in interior From 7% The graph shows the measurement of the charge decay time at 23°C/50% r.H. on 80x80x2mm IM plaques.

waterproof watches, and eyewear frames • Healthcare products – ISO and USP pre-tested solutions are sold as Mevopur™ Healthcare Functional Additives BENEFITS • Produces strong, durable, and consistent seams • Available for polyolefins, TPE, ABS, SAN, PA, PC, PMMA, and others on request • Delivered as concentrates or ready-to-use formulations • Can be combined with color into a single product • Specific regulatory compliance available on request, e.g., UL 94 recognition, EU and US food contact • Product guidance from our experts PRODUCT BULLETIN Copyright © 2023, Avient Corporation.

To meet the manufacturer’s goals for the mouse grip, a clear TPE overmolding material, GLS Versaflex™, was formulated for improved ergonomics and comfort, strong chemical resistance, and excellent bonding to the ABS substrate.

Including the following remote support functions: Polyone Corporation 33587 Walker Road Avon Lake, OH 44012 USA Audited by ABS Quality evaluations Product Design, Purchasing, Customer Service and Strategic Planning Location Registered Activities BSI Certificate Number: 85585 IATF Number: 0315491 Certification Date: 2018-07-11 Latest Issue: 2018-07-11 Expiry Date: 2021-07-10 Page: 2 of 2 This certificate remains the property of BSI and shall be returned immediately upon request.