Incomplete Fill Melt and/or mold temperature too cold • Increase nozzle and barrel temperatures • Check thermocouples and heater bands Shot size • Increase shot size • Adjust transfer position to 98% full • Increase cushion • Enlarge or widen vents and increase number of vents • Check that vents are unplugged • Check that gates are unplugged • Enlarge gates and/or runners • Perform short shots to determine fill pattern and verify proper vent location • Increase wall thickness to move gas trap to parting line Brittleness Degraded/overheated material • Decrease melt temperature • Decrease back pressure • Use smaller barrel Gate location and/or size • Relocate gate to non-stress area • Increase gate size to allow higher flow rate and lower molded-in stress Wet material • Check moisture. Sink Marks Melt too hot Insufficient material volume • Increase shot size • Increase packing pressure Part geometry too thick • Reduce wall thickness • Reduce rib thickness Flash Injection pressure too high • Decrease injection pressure • Increase clamp pressure • Increase transfer position Excess material volume • Decrease pack pressure • Decrease shot size Melt and/or mold temperature too hot Loose clamp • Reset mold height • Increase clamp tonnage Shrink Too much shrink • Increase cooling time Too little shrink • Decrease cooling time Burning • Reduce decompression • Clean, widen and increase number of vents • Increase gate size to reduce shear Wet material • Verify material is dried at proper condition Nozzle Drool Nozzle temperature too hot • Decrease nozzle temperature • Decrease back pressure • Increase screw decompression • Verify material has been dried at proper conditions Incorrect nozzle • Use reverse taper tip Weld Lines Melt front temperatures are too low • Increase pack and hold pressure • Increase gate size • Identify end of fill pattern and verify proper vent location • Add vents or increase vent width • Move gate location Warp • Reduce injection speed • Increase pack pressure • Increase pack time • Increase cool time Mold design • Non-uniform mold cooling Part design • Non-uniform wall thickness Thermolator incorrect temperature • Check settings • Inspect thermocouple Sticking in Mold Overfilled cavity • Decrease injection rate and pressure • Decrease hold pressure • Decrease cooling time Part too hot • Decrease barrel temperature • Increase cooling time • Increase draft angle • Polish cores in direction of ejection Black Specks Contamination • Purge machine Degradation • Reduce melt temperature • Reduce screw speed • Reduce back pressure Machine related • Check for wear on screw, barrel or check ring Delamination • Purge barrel to eliminate material contamination • Reduce sharp corners in material flow path • Increase venting Discoloration Oversheared material • Decrease melt temperature • Reduce residence time Mold design • Increase gate sizing Dry material • Check moisture of material to ensure it is within the recommended moisture percentage for molding 1.844.4AVIENT www.avient.com Copyright © 2021, Avient Corporation.

PLANETPAK – KEY ATTRIBUTES • Customers can expect to achieve 99%+ yield of liquid contents from a PlanetPak container • The square footprint allows effective and efficient transportation & storage • The liner and outer shell can be separated easily and compressed for efficient recycling • The polythene liner remains sealed at all times, eliminating the risk of spills and contamination • Tamper-evident and UN rated for safe transportation of classified goods • Food contact approved use PlanetPak liquid containers come in 25L, 15L, 5L, 3L and 1L sizes— all with the integrated pumping technology and all recyclable. FLEXONE UNIT FLEXONE - E FLEXONE - P FLEXONE - Q Metering Pump PCP/Quantex PCP Quantex Self-Calibrating ✔ ✔ ✔ Volumetric & Gravimetric ✔ ✔ ✔ Interchangeable Reservoir ✔ ✔ ✔ Continuous Use ✔ ✔ ✔ Touch Screen ✘ ✔ ✔ Multiple Log-In Levels ✘ ✔ ✔ RFID ✘ ✔ ✔ Network Capable ✘ ✔ ✔ Data Acquisition ✘ ✔ ✔ Remote Access Functions ✘ ✔ ✔ Sustainable Pumps ✘ ✘ ✔ Typical Polymer Rate (kg/hr) 50–1000 50–1000 50–1000 CHOOSING THE RIGHT FLEXONE OPTION FlexOne has been designed to allow the use of modular connections, depending on which operation it will be used for.

Main advantages of liquid color systems include: • Excellent statistical color distribution for consistently high quality • Shot-to-shot and batch-to-batch consistency • Single heat history • Minimal wastage due to high level dosing accuracy and product recovery rates • Highly concentrated formulations with capability of very low addition rates • Reduced inventory and storage requirements FULL SERVICE COLOR PACKAGE Avient is dedicated to supporting its customers with a full package of support services to ensure optimum value from our advanced colorant and additive technologies.

TAKE THE HEAT FLEX, RETURN, REPEAT PROCESSED & RAW FOOD PHARMACEUTICAL FORESTRY RECYCLED MATERIALS MINED/QUARRIED ROCK, ORE, COAL, SAND POWDER AGRICULTURAL Avient composite springs are tested to 1.5+ million cycles with no loss of spring rate. 1.5+ MILLION CYCLES Avient composite springs maintain performance levels even in high temperature applications up to 300°F. 300° FAHRENHEIT • Composites are up to 70% lighter than steel. • Composites resist corrosion; steel rusts easily unless it is painted or coated. 70% LIGHTER TRADITION OF EXCELLENCE Based on the proven performance of Gordon Glass™, the material of choice in composite archery bow limbs since 1953, our thermoset composite springs deliver unmatched strength & deflection for the most demanding applications.

Increased stresses during processing localize in areas of changing geometry due to non-uniform flow and differential cooling rates. INTRODUCTION PART DESIGN GUIDELINES WALL THICKNESS Uniform wall thickness will achieve a uniform cooling, fill, and shrink rate. For example, this can be done by using inserts with thermal expansion rates matched as closely as possible to the polymer used to mold the boss.

FIBER-LINE™ PERFORMANCE ENHANCING COATINGS PRODUCT SELECTION GUIDE FIBER-LINE™ COATING SELECTION GUIDE COATING Bondcoat™ Adhesion Enhancing Colorcoat™ Fiber Color Packcoat™ Performance Enhancing Protexcoat™ UV Resistant Swellcoat™ Blocker Water Blocking Swellcoat™ Water Absorbing Wearcoat™ High Abrasion Blockcoat™ Anti-Wicking Repelcoat™ Water Repellant Flamecoat™ Flame Resistant FEATURES • Created for applications where an untreated fiber does not have the ability to provide the appropriate amount of bonding characteristics to another material • Provides adhesion to another fiber or substrate without impacting other performance properties • Improves adhesion of the fiber to the resin matrix it is introduced into • Enables industry standard “burst” tests or stringent delamination analysis • Designed to achieve vibrant colors for safety, identification, and aesthetics • Specialized formulas and binders adhere the pigment to the exterior of the individual filaments, while impregnating deep into the fiber bundle • Available by Pantone or RAL number • Compatible with a variety of composite resins including epoxy, polyurethane, and polyethylene • Stronger than solution-dyed fibers • Designed to add lubricity and temperature resistance at the filament level for braided compression packing • Coating at the fiber level versus the finished braid achieves higher % level coating • Fiber level coating extends the life of the braid and reduces required maintenance • Various formulations available • PTFE, silicone, graphite, and mineral oil • Created for high performance fibers that lack inherent ultraviolet (UV) resistance • Coating impregnates the individual fibers with a specialized resin for improved UV protection • Coating enhancements include UV inhibitors, absorbers and stabilizers • Improves the processing of the product via reduced filament snagging and friction • Low level water- blocking finish for any technical fiber or textile substrate • Provides water- blocked strength reinforcements for dry cable designs • Can absorb 5x to 15x its weight in water • Dust-free coating imparts a very soft fiber hand, advantageous to cable, rope, and other textile processes • Patented technology incorporates super absorbent polymer (SAP) suspended in a proprietary resin matrix • Used in the production of ‘dry-dry’ telecommunications, electromechanical, seismic, umbilical and power cables • Can absorb up to 100x its weight in water • Creates a stable gel when exposed to water • Functionally replaces flooding compounds, filling gels, spun SAF yarns, and water blocking tapes • Enables faster, more economical and robust cable manufacturing • Increases durability and abrasion resistance by encapsulating filaments in the fiber bundle • Extends the life of the product by reducing the effects of friction and yarn on yarn abrasion • Protects the fiber from degradation and filamentation • Ideal for high abrasion and high friction applications in a range of fiber constructions and environments • Wicking refers to the tendency of a yarn or other fiber to draw moisture into filaments via capillary action • Coatings designed to prevent moisture from wicking within and between fibers and strands • Protects Wire or Optical Fiber from damaging effects of moisture, which can cause a drop in signal and attenuation • Hydrophobic additives used to promote and enhance water repellancy in industrial applications • Creates a waterproof barrier that prevents moisture from further migration • Applied at various % levels to optimize for water-proof ratings • Designed to inhibit or slow the spread of fire/flame • Coupled to fibers with inherent flame and thermal resistance to boost performance • Added to fibers with weak flame resistance to improve burn rating SUITABLE FIBERS • Technora® Fiber • UHMWPE • Graphite Fiber • PTFE Fiber • Technora® Fiber • PET Polyester (All shrinks) • UHMWPE • Vectran® LCP • Technora® Fiber • PET Polyester (All shrinks) • PET Polyester (All shrinks) • UHMWPE • PET Polyester (All shrinks) • PET Polyester (All shrinks) • Vectran® LCP • PET Polyester (All shrinks) PRODUCTS • Belt & Hose Reinforcement Yarn • Braided compression rings and seals • Valve stem packing • Pump packing • Filler Yarn • Synthetic Wire Rope • Buffer Thread • Filler Yarn • FRP Rod • Synthetic Wire Rope Kevlar® and Nomex® are trademarks of DUPONT SAFETY & CONSTRUCTION, INC.

VERSAFLEX™ HC MEDICAL TUBING SERIES • Improve extrusion rates, achieve high service temperature performance or increase clarity in medical tubing • Meet biopharmaceutical needs for weldability and minimize extractables during processing VERSALLOY™ HC SERIES • Obtain better flow in long, thin paths and lower shrink rates versus typical TPVs with our alloys, made with Santoprene™ TPV • Color easily and obtain a smooth tactile feel VERSAFLEX™ HC GASKETS & STOPPERS SERIES • Achieve no coring, good puncture and resealability in static stoppers • Meet low COF and low stiction requirements in dynamic seals CL E SERIES • Increase clarity and flexibility in bags, bottles and films • Mitigate risk with plasticizer-free formulations for film extrusion • Deliver excellent odor & O2 barrier performance for film extrusion INDUSTRY BULLETIN TPE HEALTHCARE PRODUCT SELECTOR GUIDE Versaflex™ HC MT Series Versaflex™ HC MT222 Clear 66A 0.88 14 - 334 2.30 629 4.34 898 6.19 430 220 36 ✔ ✔ High clarity, without plasticizersVersaflex™ HC MT224 Clear 75A 0.89 19 - 468 3.23 773 5.33 1360 9.40 530 321 56 ✔ ✔ Versaflex™ HC MT226 Clear 84A 0.88 20 - 606 4.17 885 6.10 1600 11.00 600 433 76 ✔ ✔ Versaflex™ HC MT317 Clear 68A 0.89 17 69 450 3.10 660 4.55 870 6.00 470 221 39 ✔ ✔ Very high service temperature Versaflex™ HC BT218 Natural 67A 0.89 19 69 381 2.60 683 4.70 1186 8.20 608 - - ✔ ✔ Weldable, kink resistant Versaflex™ HC Gaskets & Stoppers Series Versaflex™ HC 2110-35N Natural 34A 0.90 19 47 145 1.00 261 1.80 400 2.76 620 97 17 ✔ ✔ Good resealing Versaflex™ HC 2110-43N Natural 43A 0.98 12 46 134 0.92 368 2.54 723 4.98 710 - - ✔ ✔ Good compression set Versaflex™ HC 2110-57B Black 59A 1.01 20 37 369 2.54 558 3.85 537 3.70 350 147 26 ✔ ✔ Low stiction Versaflex™ CL E Series Versaflex™ CL E85 Clear 84A 0.90 20 72 752 5.18 1160 8.00 1550 10.70 450 433 76 ✔ ✔ High clarity, without plasticizers; E95 also offers excellent odor & O2 barrier Versaflex™ CL E90 Clear 90A 0.90 27 73 1000 6.89 1230 8.50 1830 12.60 57 - - ✔ ✔ Versaflex™ CL E95 Clear 95A 0.90 38 71 1680 11.60 1730 11.90 2500 17.20 580 720 126 ✔ ✔ Versaflex™ HC 3810 Series Versaflex™ HC 3810-20N Natural 20A 0.88 16 54 123 0.80 185 1.30 342 2.40 650 - - ✔ - Formulated without animal derivatives, excellent colorability, translucent Versaflex™ HC 3810-30N Natural 30A 0.89 18 58 170 1.20 245 1.70 459 3.20 680 - - ✔ - Versaflex™ HC 3810-40N Natural 40A 0.88 19 59 191 1.30 275 1.90 506 3.50 670 - - ✔ - Versaflex™ HC 3810-50N Natural 50A 0.89 21 61 264 1.80 366 2.50 699 4.80 690 - - ✔ - Versaflex™ HC 3810-60N Natural 60A 0.88 24 65 459 3.20 594 4.10 790 5.40 510 - - ✔ - Versaflex™ HC 3810-70N Natural 70A 0.88 28 67 535 3.70 684 4.70 1000 6.90 570 - - ✔ - Versaflex™ HC 3810-80N Natural 80A 0.88 30 67 689 4.80 869 6.00 1390 9.60 620 - - ✔ - Versaflex™ HC 3810-90N Natural 90A 0.88 27 89 1087 7.50 1350 9.30 1890 13.00 570 - - ✔ - Versalloy™ HC 9210 Series Versalloy™ HC 9210-45N Natural 45A 0.89 19 39 160 1.10 320 2.20 484 3.33 480 100 18 - ✔ Smooth surface aestheticsVersalloy™ HC 9210-55N Natural 53A 0.89 20 44 208 1.44 335 2.31 580 4.00 610 120 21 - ✔ Versalloy™ HC 9210-70N Natural 70A 0.89 23 53 356 2.45 510 3.52 780 5.38 590 180 32 - ✔ Versalloy™ HC 9220 Series Versalloy™ HC 9220-70 Natural 70A 0.95 17 51 453 3.12 - - 643 4.43 265 208 36 ✔ ✔ ExtrudableVersalloy™ HC 9220-80 Natural 80A 0.94 18 59 553 3.67 777 5.36 945 6.52 415 208 36 ✔ ✔ Versalloy™ HC 9220-90 Natural 90A 0.94 25 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 ✔ ✔ Standard Healthcare Grades Versaflex™ G2705N Natural 60A 0.88 - - - - 528 3.64 670 4.62 470 - - ✔ ✔ Natural, high strength Versaflex™ CL 2242 Clear 43A 0.89 23 - 152 1.05 294 2.02 731 5.00 780 124 22 ✔ ✔ High clarity, boilable Versaflex™ CL 2250 Clear 50A 0.89 20 - 220 1.52 337 2.32 827 5.70 770 140 25 ✔ ✔ Versaflex™ OM Series Versaflex™ OM 1040X Natural 42A 0.92 22 - 180 1.24 301 2.08 504 3.47 580 100 18 ✔ ✔ ABS/PC overmoldVersaflex™ OM 3060 Clear 59A 0.90 33 - 420 2.90 360 2.48 500 3.45 480 180 32 ✔ ✔ Color Hardness Specific Gravity Compression Set @ 23°C Compression Set @ 100°C 100% Modulus 300% Modulus Tensile Strength Elongation Tear Strength ISO 10993 USP VI Special Characteristics ASTM Shore A ASTM/ISO ASTM % ASTM % ASTM psi Mpa ASTM psi Mpa ASTM psi ISO Mpa ASTM % ASTM pll ISO kN/m GENERAL PROPERTIES TENSILE PROPERTIES OTHER For further information on specific grades, review technical data sheets.

Late payments will bear interest at 14.6% per annum. Buyer shall be obliged to accept the Products and pay the rate specified in the order confirmation for the quantity of Products delivered by Seller. Seller shall have the right to terminate an order confirmation with immediate effect if at any time prior to delivery, a person or group of persons who are unrelated to the persons 18.

The low usage rate, low minimum order quantities, and pelletized form for easy handling and storage make it a versatile and cost-effective choice. Omnicolor offers a broad spectrum of colors with lightfastness ratings to suit most applications. The addition of pigment and carrier could also affect the UL rating.

Personal Products Personal Care Packaging Avient Announces Debt Paydown and Term Loan Refinancing