2) Sustainability Accounting Standards Board (SASB): these standards can be applied to a number of different industries – and can frequently change depending on the most pressing issues, including:  2) Social factors

LIQUID COLOR GREEN 484-40002-2 LIQUID COLOR TURQUOISE BLUE 485-10493-2

February 2, 2023 ANAHEIM, Calif. – February 2, 2023 – Avient will exhibit at Medical Design and Manufacturing (MD&M) West next week as part of the IME West show, highlighting its polymer solutions and services that can assist healthcare OEMs and molders in solving complex device and material challenges and help advance sustainability efforts.

2) Sustainability Accounting Standards Board (SASB): these standards can be applied to a number of different industries – and can frequently change depending on the most pressing issues, including:  2) Social factors

November 2, 2022 Nov. 2, 2022 2)

EXTRUSOR Tornillo 3/4" a 6" para polietileno, de filete sencillo y sin sección de mezcla, Relación de compresión 1.5–2:1 Cabezal De presión media: ángulo de 30° a 40° Dado Del tamaño adecuado para una hilera de 1/8" o menos L/D 24:1 recomendado Paquete de mallas Sin paquete de mallas (opcional según la presión) Canal de enfriamiento 50–65°C recomendado Alimentador Preferentemente gravimétrico—3 compartimentos para cross-linked Secador Desecante, 4 horas a 70°C, para el compuesto ECCOH™ solamente; nunca se debe colocar silano seco en los secadores PROCESAMIENTO Temperatura ECCOH Serie 5000 ECCOH Serie 6000 Precalentamiento del alambre 80–120°C 80–120°C Zonas de alimentación 93°C 135°C Transición 135 °C 163°C Dosificación 150°C 190°C Cabezal/dado 165°C 215°C Material fundido 165–170°C 215–225°C Llama a la salida del dado Sí, según sea necesario Velocidad de la línea Sensible a la cizalla: Observar temperatura de fusión, amperaje del motor y presión Compuesto de purga HDPE +1.844.4AVIENT www.avient.com Copyright © 2020, Avient Corporation.

TEMPERATURE DISTRIBUTION DIAGRAM • Test Method: FTTS-FA-010-2007 4.2 • Equipment: Thermovision • Heat Source: 500W Halogen Lamp • Heat Distance: 100 cm Surface temperature before exposure: 20.22°C Surface temperature after 10 min exposure: 33.85°C Temperature change: +13.6°C Added Cesa Fiber Additives for heat preservation TEST METHOD STANDARD REQUEST TEST RESULT GB/T30127 Far infrared radiation properties Far infrared emissivity ≥0.88 (5-14um) (Test temperature: 34°C) 0.9 Far infrared radiation temperature rise ≥ 1.4°C 9°C GB/T 18319-2019 Thermal retention with accumulated by infrared ray Maximum temperature rise ≥ 6°C 8.9°C Mean temperature rise ≥ 4.4°C (20 minutes) 5.6°C FTTS-FA-010 Infrared radiation properties & thermal retention temperature rise Average emissivity ≥ 0.8 (2-22um) (Test temperature: 25°C) 0.8 Specified heating ΔT ≥ 0.5°C (relative to the standard) +5.34°C (ΔT) GB/T 11048-2008 Method A Thermal transmittance Unit: clo Naked body: 0 Underwear: 0.04 T-shirt: 0.09 Thick sweater: 0.35 Winter coat: 0.7 All the data above are the reference value 0.625 Human Physiological Experiment Blood flow volume +12.9% Blood flow velocity +13.6% Blood oxygenation(%SpO2) +1.7% www.avient.com Copyright © 2023, Avient Corporation.

Manufacturers have the ability to design and validate to meet UL criteria, including: • UL 94 V-0 • UL 94 V-1 • UL 94 V-2 NON-HALOGENATED CHOICES Silcosperse flame retardants are also available as non-halogenated formulations.

The white ABS plastic samples, produced with and without Cesa Light Additives, were exposed to simulated sunlight conditions using the weathering test ISO 4892- 2:2013.

680.00 Black 2% Black 3C 680.01 Brown 6% 4625C 680.02 Red 15% 7621C 680.03 Orange 6% 1595C 680.04 Yellow 6% 605C 680.05 Green 6% 7732C 680.06 Blue 10% 7697C 680.07 Violet 15% 7665C 680.08 Grey 5% 7539C 680.09 White 12% 7499C * Recommended let down ratio addition rates.